T07 - Design Techniques for SiC Power Modules

Technical Lecture Session Chair(s)

• QY

  Qing Ye

  Texas Instruments
• DY

  Dorai Yelaverthi

  Utah State University, United States

Presentations:

• 8:30 AM – 8:50 AM ET

  Design, Fabrication and Testing of 3.3 kV/200A SiC Half-Bridge Power Module
  

  Technical Lecture Presenter: Yang Li – Stony Brook University
• 8:50 AM – 9:10 AM ET

  10 kV SiC MOSFET Power Module with Double-Sided Jet-Impingement Cooling
  

  Technical Lecture Presenter: Mark Cairnie – Virginia Tech
• 9:10 AM – 9:30 AM ET

  A 10 kV SiC Power Module Stacked Substrate Design with Patterned Middle-Layer for Partial Discharge Reduction
  

  Technical Lecture Presenter: Xiaoling Li, MA – Univerity of Arkansas
• 9:30 AM – 9:50 AM ET

  Design Considerations of a 3.3 kV SiC-Based Reverse Voltage Blocking Module for Current Source Inverter Application
  

  Technical Lecture Presenter: Sneha Narasimhan – NCSU
• 9:50 AM – 10:10 AM ET

  Common Source Inductance Compensation Technique for Dynamic Current Balancing in SiC MOSFETs Parallel Operations
  

  Technical Lecture Presenter: Boyi Zhang – Delta Electronics (Americas) Ltd.
• 10:40 AM – 11:00 AM ET

  Fabrication and Experimental Validation of Low Inductance SiC Power Module with Integrated Microchannel Cooler
  

  Technical Lecture Presenter: Hao Chen – University of Arkansas
• 11:00 AM – 11:20 AM ET

  A Novel Integrated 1.2 kV Double-Sided Cooled Power Module
  

  Technical Lecture Presenter: Riya Paul – University of Arkansas
• 11:20 AM – 11:40 AM ET

  A Guideline for Silicon Carbide MOSFET Thermal Characterization Based on Source-Drain Voltage
  

  Technical Lecture Presenter: Yi Zhang – Aalborg University
• 11:40 AM – 12:00 PM ET

  A Smart Silicon Carbide Power Module with Pulse Width Modulation Over Wi-Fi and Wireless Power Transfer-Enabled Gate Driver
  

  Technical Lecture Presenter: Faisal Khan – National Renewable Energy Laboratory