Full Schedule

7:00 AM – 2:00 PM ET

Speaker Ready Room Open Thursday
Location: W107

Speaker: APEC 2023

8:00 AM – 12:00 PM ET

Registration Open Thursday
Location: West A Lobby

Speaker: APEC 2023

8:30 AM – 9:00 AM ET

PELS Technical Operations Committee Breakfast
Location: Rosen Centre Salon 17

8:30 AM – 11:20 AM ET

PSMA Sponsored Industry Session: Energy Storage IS24
Location: Convention Center, W205BC

8:30 AM – 11:20 AM ET

T25 - Bi-directional DC-DC Converters
Location: W101

Technical Lecture Session Chair: Justin Henspeter, MSEE – IBM

Technical Lecture Session Chair: Cahit Gezgin, PhD – Infineon Technologies AG

8:30 AM – 8:50 AM ET

T25.1 - Asymmetric Resonant Tank Design for a Bidirectional CLLC Resonant Converter in G2V and V2G Operation
Location: W101

Technical Lecture Presenter: Stefan Ditze – Fraunhofer IISB

Bidirectional dc/dc converters

8:50 AM – 9:10 AM ET

T25.2 - Sensor-Reduction Control for SPS-Modulated DAB Converter Using Ultra-Local Model
Location: W101

Technical Lecture Presenter: Tan-Quoc Duong – University of Ulsan

Bidirectional dc/dc converters

9:10 AM – 9:30 AM ET

T25.3 - Operation and Comparison of a Novel Modular Asymmetric Buck-Boost DC-DC Converter for High-Power Applications
Location: W101

Technical Lecture Presenter: Soumya Nag – Indian Institute of Technology

Bidirectional dc/dc converters

9:30 AM – 9:50 AM ET

T25.4 - Data-Driven Modeling of Zero Voltage Switching of Non-Resonant DAB Converters Under TPS Modulation
Location: W101

Technical Lecture Presenter: Xinze Li – Nanyang Technological University

Bidirectional dc/dc converters

9:50 AM – 10:10 AM ET

T25.5 - Stacked-Bridge-Based Three-Level DAB Converter in 800V DC Micro-Grids
Location: W101

Technical Lecture Presenter: Haoyu Zhang – ShanghaiTech University

Bidirectional dc/dc converters

10:40 AM – 11:00 AM ET

T25.6 - A Communication-Integrated Battery Equalization Strategy Based on Bidirectional Flyback Converters
Location: W101

Technical Lecture Presenter: Lingyu Li – College of Electrical Engineering Zhejiang University

Bidirectional dc/dc converters

11:00 AM – 11:20 AM ET

T25.7 - Single Current Measurement Based Bidirectional Frequency Tracking for Unregulated Series Resonant DAB Converters
Location: W101

Technical Lecture Presenter: Liyang Du – University of Arkansas

Bidirectional dc/dc converters

8:30 AM – 11:20 AM ET

T26 - Motors Drives
Location: W102

Technical Lecture Session Chair: Rakib Islam – American Axle & Manufacturing

Technical Lecture Session Chair: Woongkul Lee – Michigan State University

8:30 AM – 8:50 AM ET

T26.1 - Saliency-Based Sensorless IPMSM Drives Using Derivatives of Phase Currents with Single DC-Link Current Sensor
Location: W102

Technical Lecture Presenter: Byung Ryang Park – Seoul national university

AC, DC, BLDC Motor Drives

8:50 AM – 9:10 AM ET

T26.2 - Design of High-Efficiency Ultra-High-Speed Motor for Fuel-Cell Air Compressor Using an Amorphous Stator with Multiphase Winding
Location: W102

Technical Lecture Presenter: Khurshedul Islam – Mississippi State University

AC, DC, BLDC Motor Drives

9:10 AM – 9:30 AM ET

T26.3 - Evaluation and Efficiency Comparison of Soft-Switching ARCP SiC-Based Traction Inverters in Electric Vehicles
Location: W102

Technical Lecture Presenter: Che-Wei Chang – Virginia Polytechnic Institute and State University

AC, DC, BLDC Motor Drives

9:30 AM – 9:50 AM ET

T26.4 - Design and Optimization of a Modular Multiphase Drive for Multiphase Machines
Location: W102

Technical Lecture Presenter: Yuxuan Wu – Stony Brook University

Single- and Multi-Phase Inverters

9:50 AM – 10:10 AM ET

T26.5 - Smart Coils for Mitigation of Motor Reflected Overvoltage Fed by SiC Drives
Location: W102

Technical Lecture Presenter: Majid Tahmasbi Fard – University of Kentucky

High Performance Drives

10:40 AM – 11:00 AM ET

T26.6 - Self-Calibration Technique for Junction Temperature Estimation of SiC MOSFET Inverters Loaded with Synchronous Reluctance Motors
Location: W102

Technical Lecture Presenter: Paolo Pescetto – Politecnico di Torino

Sensor Integration

11:00 AM – 11:20 AM ET

T26.7 - A Multi-Kilowatt Low-Profile GaN Inverter for Light Electric Vehicles and High-Power Tools
Location: W102

Technical Lecture Presenter: Martin Wattenberg – Infineon Technologies Austria AG

AC, DC, BLDC Motor Drives

8:30 AM – 11:20 AM ET

T27 - Power Converter Modulation & Control
Location: W103

Technical Lecture Session Chair: Qingxuan Ma – GaN Systems

Technical Lecture Session Chair: Jingbo Liu – Eaton

8:30 AM – 8:50 AM ET

T27.1 - A Robust Voltage Sensor-Less Control for SiC Grid-Tied Inverter with Zero-Voltage Ride-Through
Location: W103

Technical Lecture Presenter: Xiaofeng Dong – Florida State University

Grid-Tied Systems

8:50 AM – 9:10 AM ET

T27.2 - Non-Isolated High Voltage Conversion Ratio Soft-Switched Interleaved Bidirectional DC-DC Converter with Low Voltage Stress on Switches
Location: W103

Technical Lecture Presenter: Zahra Saadatizadeh – University of Arkansas

Bi-directional Power Converters

9:10 AM – 9:30 AM ET

T27.3 - Design and Control of Three-Phase Smart Inverter Using Gate-Drive Integrated Gallium Nitride (GaN) Devices for Solar Energy Integration
Location: W103

Technical Lecture Presenter: Tucker Skinner – Utah State University

Photovoltaic (PV) Inverters and Micro Inverters

9:30 AM – 9:50 AM ET

T27.4 - A Comprehensive Control Scheme for CM Resonance Suppression and Current Quality Improvement with DPWM Method in ILCL-Filtered Grid-Connected Inverter
Location: W103

Technical Lecture Presenter: Huizhong Sun – Aalborg University

Photovoltaic (PV) Inverters and Micro Inverters

9:50 AM – 10:10 AM ET

T27.5 - Autonomous Control Schemes for Grid-Interfaced Series-Connected Low-Voltage Isolated PV Microinverter
Location: W103

Technical Lecture Presenter: Subhrasish Pal – Indian Institute of Technology Kharagpur

Photovoltaic (PV) Inverters and Micro Inverters

10:40 AM – 11:00 AM ET

T27.6 - Optimal Modulation and DM Filter Design for a High Switching Frequency Single-Stage Microinverter
Location: W103

Technical Lecture Presenter: Arafat Hasnain – University of Maryland

Photovoltaic (PV) Inverters and Micro Inverters

11:00 AM – 11:20 AM ET

T27.7 - On the Fault-Ride-Through Dynamics of Grid-Forming Converters — a Multi-Dimensional Adaptive Inertia Approach
Location: W103

Technical Lecture Presenter: Pranjal Gajare – Georgia Tech

Grid-Tied Systems

8:30 AM – 11:20 AM ET

T28 - Solid-State Transformers
Location: W104

Technical Lecture Session Chair: Maja Harfman Todorovic – Menlo Microsystems

Technical Lecture Session Chair: Mohammed Agamy – University at Albany

8:30 AM – 8:50 AM ET

T28.1 - Second Harmonic Ripple Voltage Suppression for Single-Phase ISOP Solid-State Transformer by Active Power Decoupling
Location: W104

Technical Lecture Presenter: Tianyu Wei – Power Electronics Laboratory EPFL

Solid-State Transformers

8:50 AM – 9:10 AM ET

T28.2 - A Single-Stage Three-Phase Isolated AC-DC Converter for Medium Voltage Solid State Transformer Applications
Location: W104

Technical Lecture Presenter: Chi Zhang – Delta Electronics (Americas) Ltd.

Solid-State Transformers

9:10 AM – 9:30 AM ET

T28.3 - Square-Wave Source with Adjustable dv/dt for Insulation Testing Under Mixed-Frequency Stresses
Location: W104

Technical Lecture Presenter: Hajime Takayama – Kyoto University

Solid-State Transformers

9:30 AM – 9:50 AM ET

T28.4 - 7.2kV/100kVA Solid State Transformer Based on Half Bridge LLC Resonant Converter and 15kV SiC AC Switch
Location: W104

Technical Lecture Presenter: Wei Xu – The University of Texas at Austin

Solid-State Transformers

9:50 AM – 10:10 AM ET

T28.5 - Magnetic Design of a 4.16 kV/1 MW Medium Voltage PV Plus Storage Solid State Transformer (PVS-SST)
Location: W104

Technical Lecture Presenter: Zhicheng Guo – UT Austin

Solid-State Transformers

10:40 AM – 11:00 AM ET

T28.6 - Medium Voltage Solid State Transformer for Extreme Fast Charging Applications
Location: W104

Technical Lecture Presenter: M A Awal, PhD – Danfoss

Solid-State Transformers

11:00 AM – 11:20 AM ET

T28.7 - A High-Frequency PCB-Winding Transformer Design with Medium Voltage Insulation for Solid-State Transformer
Location: W104

Technical Lecture Presenter: Zheqing Li – CPES, Virginia Polytechnic Institute and State University

Solid-State Transformers

8:30 AM – 11:20 AM ET

T29 - Magnetics Modeling & Simulation
Location: W105

Technical Lecture Session Chair: Matt Wilkowski – EnaChip

Technical Lecture Session Chair: George Slama – Würth Elektronik

8:30 AM – 8:50 AM ET

T29.1 - Predicting the B-H Loops of Power Magnetics with Transformer-Based Encoder-Projector-Decoder Neural Network Architecture
Location: W105

Technical Lecture Presenter: Haoran Li – Princeton University

Magnetics modeling and simulations

8:50 AM – 9:10 AM ET

T29.2 - Current Sharing Analysis of a High Power Transformer with Parallel Windings
Location: W105

Technical Lecture Presenter: Tianlong Yuan – CPEC Virginia Tech

Magnetics modeling and simulations

9:10 AM – 9:30 AM ET

T29.3 - An Alternative Method to Accurately Model Magnetic Components Using Ansys HFSS 3D
Location: W105

Technical Lecture Presenter: Amin Khakparvaryazdi, PhD – University of Alberta

Magnetics modeling and simulations

9:30 AM – 9:50 AM ET

T29.4 - A Simplified DC-Bias Injection Method with Mirror Transformer for Magnetic Material Characterization
Location: W105

Technical Lecture Presenter: Shukai Wang – Princeton University

Magnetics modeling and simulations

9:50 AM – 10:10 AM ET

T29.5 - Transformer Leakage Inductance Design Methodology
Location: W105

Technical Lecture Presenter: Angshuman Sharma – Missouri University of Science and Technology

Magnetics modeling and simulations

10:40 AM – 11:00 AM ET

T29.6 - Design Guidelines to Reduce Parasitic Capacitance in Planar Inductors
Location: W105

Technical Lecture Presenter: Shaokang Luan – Aalborg University

Magnetics modeling and simulations

11:00 AM – 11:20 AM ET

T29.7 - Calculation of Ferrite Core Losses with Arbitrary Waveforms Using the Composite Waveform Hypothesis
Location: W105

Technical Lecture Presenter: Thomas Guillod – Dartmouth College

Magnetics modeling and simulations

8:30 AM – 11:20 AM ET

T30 - Practical Design Considerations for Power Modules
Location: W108

Technical Lecture Session Chair: Ran Mo – Shell

Technical Lecture Session Chair: Satarupa Bal – Eaton

8:30 AM – 8:50 AM ET

T30.1 - Layout-Dominated Electro-Thermal Optimization for Multichip Power Modules with Response Surface and Fourier Series Model
Location: W108

Technical Lecture Presenter: Yu Chen – Zhejiang University

Power Electronics Packaging

8:50 AM – 9:10 AM ET

T30.2 - Experimental Evaluation of Liquid Immersed Electronics for High Density Power Converters
Location: W108

Technical Lecture Presenter: Jamie Turnbull – UW-Madison

Power Electronics Packaging

9:10 AM – 9:30 AM ET

T30.3 - Modular Scalable Power Electronics Building Block Based MVDC Solid State Circuit Breakers
Location: W108

Technical Lecture Presenter: Shuyan Zhao – Drexel University

Quality and System Reliability

9:30 AM – 9:50 AM ET

T30.4 - Proactive Thyristor-Based DC Solid-State Circuit Breaker
Location: W108

Technical Lecture Presenter: Reza Kheirollahi – Drexel University

Quality and System Reliability

9:50 AM – 10:10 AM ET

T30.5 - Package Design of a Double-Side Cooled 20-kV Gallium Nitride Diode Module with Improved Insulation by Nonlinear Resistive Polymer-Nanoparticle Coating
Location: W108

Technical Lecture Presenter: Zichen Zhang – Virginia Tech

Power Modules / High Density Design

10:40 AM – 11:00 AM ET

T30.6 - A 2x2 Paralleling GaN Half-Bridge Power Module for High-Density 500kHz 3.3kW CLLC Converter
Location: W108

Technical Lecture Presenter: Satoshi Otsu – Panasonic Industry Co Ltd

Power Modules / High Density Design

11:00 AM – 11:20 AM ET

T30.7 - A Simple and Non-Destructive Method to Measure Per-Terminal Baseplate Coupling of Power Modules
Location: W108

Technical Lecture Presenter: Brian Deboi – Wolfspeed

Thermal and EMC Management

8:30 AM – 11:20 AM ET

T31 - Wireless Power Transfer II
Location: W109A

Technical Lecture Session Chair: Khurram Afridi, PhD – Cornell University

Technical Lecture Session Chair: Shajjad Chowdhury – Oak Ridge National Lab

8:30 AM – 8:50 AM ET

T31.1 - Current Controlled Transmitter for High Frequency WPT Utilizing Non-Invasive PCB Integrated Rogowski Current Sensor
Location: W109A

Technical Lecture Presenter: Bar Halivni, M.Sc. – Ben-Gurion University of the Negev - PEMIC

Wireless charging

8:50 AM – 9:10 AM ET

T31.2 - State Estimation Based Foreign Object Detection in Wireless Power Transfer Systems
Location: W109A

Technical Lecture Presenter: Kang Yue, MA – ShanghaiTech University

Wireless charging

9:10 AM – 9:30 AM ET

T31.3 - A Fast-Speed Phase Adaptation Algorithm Based on Power Feedback for Microwave Power Transmission
Location: W109A

Technical Lecture Presenter: Doumin Zhou – Nanjing University of Aeronautics and Astronautics

Wireless charging

9:30 AM – 9:50 AM ET

T31.4 - A Planar Omnidirectional Wireless Power Transfer Platform for Portable Devices
Location: W109A

Technical Lecture Presenter: Xipei Yu – Center for Power Electronics Systems

Wireless charging

9:50 AM – 10:10 AM ET

T31.5 - Ultra-Wideband Unidirectional Reset-Less Rogowski Coil Switch Current Sensor Topology for High-Frequency DC-DC Power Converters
Location: W109A

Technical Lecture Presenter: Ali Parsa Sirat – University of North Carolina at Charlotte

Non-contact Sensors for Power Electronics

10:40 AM – 11:00 AM ET

T31.6 - A Compact Anisotropic Magnetoresistance Based Contactless Current Sensor for Medium Voltage Power Electronics Applications
Location: W109A

Technical Lecture Presenter: Lakshmi Ravi – Virginia Polytechnic Institute and State University

Non-contact Sensors for Power Electronics

11:00 AM – 11:20 AM ET

T31.7 - A Novel Metal Object Detection System Using Asymmetric Triangular Gradiometers for High-Power Inductive Power Transfer Applications
Location: W109A

Technical Lecture Presenter: Jin S. Choi – Samsung Electronics

Non-contact Sensors for Power Electronics

8:30 AM – 11:20 AM ET

T32 - Fast Charging Applications
Location: W109B

Technical Lecture Session Chair: Dong Cao, PhD – University of Dayton

Technical Lecture Session Chair: Anup Anurag – Delta Electronics Americas

8:30 AM – 8:50 AM ET

T32.1 - Active Power Decoupling Strategy for Single Phase AC Charging Using a Dual Inverter Drive
Location: W109B

Technical Lecture Presenter: Chatumal Perera – University of Toronto

Charging Systems

8:50 AM – 9:10 AM ET

T32.2 - Scalable GaN-Based EV Charging Station with Energy Storage
Location: W109B

Technical Lecture Presenter: Mohamed Tamasas Elrais – University of Central Florida

Charging Systems

9:10 AM – 9:30 AM ET

T32.3 - A 3.3 kV Silicon Carbide MOSFET Based Building Block for Medium-Voltage Ultra-Fast DC Chargers
Location: W109B

Technical Lecture Presenter: Ahmed Ismail – University of Arkansas

Charging Systems

9:30 AM – 9:50 AM ET

T32.4 - Event-Based Spread Spectrum Voltage and Current Mode Digital PFM Controllers in LLC Converters
Location: W109B

Technical Lecture Presenter: Santanu Kapat, PhD – Indian Institute of Technology (IIT) Kharagpur

Vehicular Power Electronic Circuits and Systems

9:50 AM – 10:10 AM ET

T32.5 - High Power Factor Correction of a Single Stage Bidirectional Wireless Battery Charger for EV
Location: W109B

Technical Lecture Presenter: Asier Garcia-Bediaga – IKERLAN

Charging Systems

10:40 AM – 11:00 AM ET

T32.6 - An 18 kW Battery Charger Module for Extreme Fast Charging Applications Using an Unfolding-Based AC-DC Topology
Location: W109B

Technical Lecture Presenter: Shubhangi Gurudiwan – Utah State University

Charging Systems

11:00 AM – 11:20 AM ET

T32.7 - Individual Module Power Transmission Control for Extreme Fast Charging Stations Configured with Solid-State Transformer
Location: W109B

Technical Lecture Presenter: Dong-Ho Choi – Dankook University

Charging Systems

8:30 AM – 11:20 AM ET

IS19 - WBG Applications
Location: W206

Industry Session Chair: Peter Di Maso – Cambridge GaN Devices

Industry Session Chair: Reza Sharifi – Texas Instruments

8:30 AM – 8:55 AM ET

IS19.1 - A SiC Based 60kW Three Phases LLC Converter with Wide Voltage Range
Location: W206

Industry Session Presenter: Chen Wei – Wolfspeed

WBG Applications

8:55 AM – 9:20 AM ET

IS19.2 - Maximize Performance of Silicon Carbide MOSFETs for High Power Conversions
Location: W206

Industry Session Presenter: Yuequan Hu, PhD – Wolfspeed

WBG Applications

9:20 AM – 9:45 AM ET

IS19.3 - 2.4kW All-GaN 48V-12V Bidirectional Converter with Bi-GaN Load Switch for Mild Hybrid Electrical Vehicle (MHEV)
Location: W206

Industry Session Presenter: Shuilin Tian – Innoscience America INC

WBG Applications

9:45 AM – 10:10 AM ET

IS19.4 - New GaNSense Half-Bridge IC Enables Next Gen High-Frequency, High-Efficiency, High-Density Topologies
Location: W206

Industry Session Presenter: Tom Ribarich – Navitas Semiconductor

WBG Applications

10:30 AM – 10:55 AM ET

IS19.5 - Hybrid SiC and GaN Implementation of a Totem Pole PFC
Location: W206

Industry Session Presenter: Sam Abdel-Rahman – Infineon Technologies

WBG Applications

10:55 AM – 11:20 AM ET

IS19.6 - High Efficiency and High-Power Density GaN-Based 11kW/800V Onboard Charger
Location: W206

Industry Session Presenter: Qingxuan Ma – GaN Systems

WBG Applications

8:30 AM – 11:20 AM ET

IS20 - Packaging and Thermal Management
Location: W203ABC

Industry Session Chair: Douglas C. Hopkins, PhD – North Carolina State University

Industry Session Chair: Ratul Das – University of California San Diego

8:30 AM – 8:55 AM ET

IS20.1 - Assessment of MOSFET Switching Losses Based on Junction Temperature: Comparison in an LLC Converter Between TO-247 and ACEPACK™ SMIT Using MDmesh™ DM6 Technology
Location: W203ABC

Industry Session Presenter: Alfio Scuto – STMicroelectronics

Packaging and Thermal Management

8:55 AM – 9:20 AM ET

IS20.2 - Maximize Performances and Power Density in AC-DC Power Conversion by Using SMD Packages with Top-Side Cooling
Location: W203ABC

Industry Session Presenter: Ludovica Longo – STMicroelectronics

Packaging and Thermal Management

9:20 AM – 9:45 AM ET

IS20.3 - Robust, Flexible Copper Interconnections to Enhance Performance and Reliability of SiC Power Modules for Traction Inverters
Location: W203ABC

Industry Session Presenter: Brandon Passmore – Wolfspeed

Packaging and Thermal Management

9:45 AM – 10:10 AM ET

IS20.4 - Thermal Management for Bottom-Side Cooled Surface-Mount SiC Devices
Location: W203ABC

Industry Session Presenter: Tamanna Bhatia, MS – Wolfspeed

Packaging and Thermal Management

10:30 AM – 10:55 AM ET

IS20.5 - Inverter/Converter Power Density and Flexibility Improvements Through Modularity and Novel Thermal Management Architecture
Location: W203ABC

Industry Session Presenter: Ian Byers – Marel Power Solutions

Packaging and Thermal Management

10:55 AM – 11:20 AM ET

IS20.6 - GaN Transistor for Next Generation Power Supply Units
Location: W203ABC

Industry Session Presenter: Bo Sheng – GaN Systems Inc.

Packaging and Thermal Management

8:30 AM – 11:20 AM ET

IS21 - PMBus and Security in Power Supplies with Digital Communication
Location: W202BC

Industry Session Chair: Richard Nowakowski – Texas Instruments

Industry Session Chair: Peter Miller – Texas Instruments

8:30 AM – 8:55 AM ET

IS21.1 - What is new in PMBus™ 1.4 Part I & Part II
Location: W202BC

Industry Session Presenter: Bob White – Embedded Power Labs

PMBus and Security in Power Supplies with Digital Communication

8:55 AM – 9:20 AM ET

IS21.2 - AVSBus™ Serial Interface for Dynamic Voltage Scaling – Evolution
Location: W202BC

Industry Session Presenter: Juan Arango – Texas Instruments

PMBus and Security in Power Supplies with Digital Communication

9:20 AM – 9:45 AM ET

IS21.3 - Secure PMBus controller to add security protection to PMBus-based devices
Location: W202BC

Industry Session Presenter: Clay Greene – Analog Devices Inc

PMBus and Security in Power Supplies with Digital Communication

9:45 AM – 10:10 AM ET

IS21.4 - Firmware Authentication Techniques for Front-End Power supplies and Environment Monitors
Location: W202BC

Industry Session Presenter: Srini Kothapally – Cisco Systems

PMBus and Security in Power Supplies with Digital Communication

10:30 AM – 10:55 AM ET

IS21.5 - Implementing Digital Power Supply Security with PMBus 1.5
Location: W202BC

Industry Session Presenter: Robert Santucci – Intel Corporation

PMBus and Security in Power Supplies with Digital Communication

10:55 AM – 11:20 AM ET

IS21.6 - Looking Forward – PMBus™ 2.0
Location: W202BC

Industry Session Presenter: Peter Miller – System Management Interface Forum

PMBus and Security in Power Supplies with Digital Communication

8:30 AM – 11:20 AM ET

IS22 - Flyback Converters for Low Power Applications
Location: W204ABC

Industry Session Chair: Armando Mesa – onsemi

Industry Session Chair: Elisabetta Mahmutovic – Texas Instruments

8:30 AM – 8:55 AM ET

IS22.1 - How to Achieve Low Standby Power for an Isolated offline Flyback
Location: W204ABC

Industry Session Presenter: Roberto Scibilia – TEXAS INSTRUMENTS

Flyback Converters for Low Power Applications

8:55 AM – 9:20 AM ET

IS22.2 - Under the Hood of an Isolated Flyback Compensation with TL431 Voltage Reference
Location: W204ABC

Industry Session Presenter: Elisabetta Mahmutovic – Texas Instruments

Flyback Converters for Low Power Applications

9:20 AM – 9:45 AM ET

IS22.3 - High Efficiency and High-Power Density 35W USB-PD Adapter Using Asymmetrical Half-Bridge Flyback and GaN Device
Location: W204ABC

Industry Session Presenter: Allan Saliva – Infineon Technologies

Flyback Converters for Low Power Applications

9:45 AM – 10:10 AM ET

IS22.4 - Accurate Multiple-Output Flyback Converter with Single Secondary Winding
Location: W204ABC

Industry Session Presenter: Yi Li – Power Integrations

Flyback Converters for Low Power Applications

10:30 AM – 10:55 AM ET

IS22.5 - Peak Power Optimization Using ZVS, Active-Clamp Flyback Converters
Location: W204ABC

Industry Session Presenter: Donnie Saturno – Power Integrations

Flyback Converters for Low Power Applications

10:55 AM – 11:20 AM ET

IS22.6 - Achieving Zero Input Power for No-Load Operation in a 5 W to 10 W Flyback Power Supply
Location: W204ABC

Industry Session Presenter: John Mardy Rongavilla – Power Integrations

Flyback Converters for Low Power Applications

8:30 AM – 11:20 AM ET

IS23 - Measurement Techniques and Other Topics
Location: W205A

Industry Session Chair: Davide Giacomini – Infineon Technologies AG

Industry Session Chair: Raj Pulugurtha, PhD – Florida International University

8:30 AM – 8:55 AM ET

IS23.1 - Measurement of In-Circuit Magnetic Properties of Core Using Oscilloscope for Efficient Automotive Designs
Location: W205A

Industry Session Presenter: Srikrishna N H – Tektronix India Pvt. Ltd.

Measurement Techniques and Other Topics

8:55 AM – 9:20 AM ET

IS23.2 - Using a High Bandwidth Loss Probe to Measure SiC and GAN Fets Losses with a Lower Bandwidth Oscilloscope
Location: W205A

Industry Session Presenter: Ken Henderson – Cleverscope

Measurement Techniques and Other Topics

9:20 AM – 9:45 AM ET

IS23.3 - The Secrets to an Accurate and Useful Double Pulse Test
Location: W205A

Industry Session Presenter: Julius Rice – Wolfspeed

Measurement Techniques and Other Topics

9:45 AM – 10:10 AM ET

IS23.4 - Recirculating Load Testbed for High Power Inverter Validation
Location: W205A

Industry Session Presenter: Jonathan Hayes – Wolfspeed

Measurement Techniques and Other Topics

10:30 AM – 10:55 AM ET

IS23.5 - Small Form-Factor Tunable Wavelength Horticultural Led Driver
Location: W205A

Industry Session Presenter: Fred Song – Infineon Technologies Americas Corp.

Measurement Techniques and Other Topics

10:55 AM – 11:20 AM ET

IS23.6 - Designing an Input EMI Filter for an Automotive Multiphase Buck Converter
Location: W205A

Industry Session Presenter: Eric Lee – Texas Instruments

Measurement Techniques and Other Topics

8:30 AM – 11:20 AM ET

IS24 - Energy Storage Systems and Their Relevant Aspects
Location: W205BC

Industry Session Chair: Victor Boyadzhyan – MidContinent Instruments and Avionics

Industry Session Chair: Eric Swenson, MSEE – IBM

8:30 AM – 8:55 AM ET

IS24.1 - Fitness for Purpose – Choosing the Right Storage Device for IoT Applications
Location: W205BC

Industry Session Presenter: Mike Hayes, MEngSc – Tyndall National Institute

Energy Storage Systems and Their Relevant Aspects

8:55 AM – 9:20 AM ET

IS24.2 - V2G Storage with School Bus Fleets
Location: W205BC

Industry Session Presenter: Aaron Nutt – Dynapower

Energy Storage Systems and Their Relevant Aspects

9:20 AM – 9:45 AM ET

IS24.3 - Grid Tied Storage
Location: W205BC

Industry Session Presenter: Babu Chalamala, PhD – Sandia National Laboratories

Energy Storage Systems and Their Relevant Aspects

9:45 AM – 10:10 AM ET

IS24.4 - SuperCapacitor Applications
Location: W205BC

Industry Session Presenter: Nihal Kularatna, DSc – The University of Waikato

Energy Storage Systems and Their Relevant Aspects

10:30 AM – 10:55 AM ET

IS24.5 - High Power and Dynamic Wireless Charging of Electric Vehicles
Location: W205BC

Industry Session Presenter: Veda Prakash Galigekere – UT Battelle ORNL

Energy Storage Systems and Their Relevant Aspects

10:55 AM – 11:20 AM ET

IS24.6 - Panel Discussion on Energy Storage Technologies
Location: W205BC

Industry Session Presenter: Victor Boyadzhyan – Arseco Laboratories

Energy Storage Systems and Their Relevant Aspects

9:00 AM – 10:30 AM ET

PELS VP of Standards Committee
Location: Rosen Centre Salon 18

9:00 AM – 12:00 PM ET

PELS VP of Technical Operations
Location: Rosen Centre Salon 17

10:10 AM – 10:40 AM ET

Break
Location: Outside of Technical & Industry Session Rooms

Speaker: APEC 2023

11:15 AM – 1:45 PM ET

Lunch
Location: Hall WA3

Speaker: APEC 2023

11:30 AM – 1:30 PM ET

D01 - AC-DC Converters
Location: HALL WA3

Technical Dialogue Session Chair: Mike Ranjram – Arizona State University

11:30 AM – 1:30 PM ET

D01.1 - Precise Gate Timing Control Based on State Trajectory Analysis for 3.3kW Bidirectional AC/DC Converter
Location: HALL WA3

Technical Dialogue Presenter: Ryusuke Kanomata – Panasonic Industry Co., Ltd.

Bidirectional AC/DC converters

11:30 AM – 1:30 PM ET

D01.2 - Evaluation of a Single-Phase Soft Switched AC/DC Active Front End Converter for Solid-State Transformer Applications
Location: HALL WA3

Technical Dialogue Presenter: Anup Anurag – Delta Electronics Americas

Power Factor Correction, CCM, DCM, CRM/BCM Control, Bridgeless

11:30 AM – 1:30 PM ET

D01.3 - A ZVD Control Based 5kW iTCM Totem Pole PFC for Server Power
Location: HALL WA3

Technical Dialogue Presenter: Brent McDonald – Texas Instruments

Power Factor Correction, CCM, DCM, CRM/BCM Control, Bridgeless

11:30 AM – 1:30 PM ET

D01.4 - Design Methodology for Power-Dense and Cost-Effective Series-Stacked Active Power Decoupling Circuit
Location: HALL WA3

Technical Dialogue Presenter: Sandeep Anand – Indian Institute of Technology

Single-Phase and Three-Phase Input

11:30 AM – 1:30 PM ET

D01.5 - Weight Optimization of a Flying Capacitor Multilevel Converter
Location: HALL WA3

Technical Dialogue Presenter: Sami Pettersson – ABB

Bidirectional AC/DC converters

11:30 AM – 1:30 PM ET

D01.6 - Cascaded Half-Bridge Multi-Level Multi-Outputs Bridgeless PFC
Location: HALL WA3

Technical Dialogue Presenter: Jun Min – The University of British Columbia

Power Factor Correction, CCM, DCM, CRM/BCM Control, Bridgeless

11:30 AM – 1:30 PM ET

D01.7 - AC Dropout Algorithm for Digitally Controlled Totem-Pole Bridgeless PFC
Location: HALL WA3

Technical Dialogue Presenter: Jongwan Kim – META

Power Factor Correction, CCM, DCM, CRM/BCM Control, Bridgeless

11:30 AM – 1:30 PM ET

D01.10 - A Single-Stage AC/DC Bridge-Less Converter with an Adaptive Control Scheme and Reduced DC-Link and Output Capacitances for High Voltage EV Systems
Location: HALL WA3

Technical Dialogue Presenter: Siamak Derakhshan – York University

Power Factor Correction, CCM, DCM, CRM/BCM Control, Bridgeless

11:30 AM – 1:30 PM ET

D01.11 - PCB-Based Magnetics Integration and Common-Mode Noise Suppression for a High-Frequency PFC
Location: HALL WA3

Technical Dialogue Presenter: Shuo Wang, PhD candidate – Virginia Tech

Power Factor Correction, CCM, DCM, CRM/BCM Control, Bridgeless

11:30 AM – 1:30 PM ET

D01.12 - A Modular DC to Three-Phase AC Converter Topology with Minimized Intermediate Energy Storage Requirements
Location: HALL WA3

Technical Dialogue Presenter: Wiwin Hartini – Portland State University

Bidirectional AC/DC converters

11:30 AM – 1:30 PM ET

D01.13 - A Two-Step Commutation Scheme with Analysis of Zero-Voltage Switching for Bidirectional Isolated Matrix Converter
Location: HALL WA3

Technical Dialogue Presenter: Bing Gong – Toronto Metropolitan University

Single-Phase and Three-Phase Input

11:30 AM – 1:30 PM ET

D01.14 - An Active EMI Filter for High-Power Off-Line Applications
Location: HALL WA3

Technical Dialogue Presenter: Tim Merkin

Single-Phase and Three-Phase Input

11:30 AM – 1:30 PM ET

D01.15 - Flying Capacitor Voltage Imbalance Protection in Multilevel Bidirectional Inverters During Surge
Location: HALL WA3

Technical Dialogue Presenter: Rytis Beinarys, BE PD – ICERGi

Power Factor Correction, CCM, DCM, CRM/BCM Control, Bridgeless

11:30 AM – 1:30 PM ET

D02 - DC-DC Converters I
Location: HALL WA3

Technical Dialogue Session Chair: Mark DeMarie – IBM

11:30 AM – 1:30 PM ET

D02.2 - A Low-Ripple High-Frequency High-Voltage Power Supply for Ion Pumps
Location: HALL WA3

Technical Dialogue Presenter: Zhechi Ye – Stanford University

Resonant Converters

11:30 AM – 1:30 PM ET

D02.3 - A Novel Non-Isolated Bidirectional 48V-12V DCX Converter
Location: HALL WA3

Technical Dialogue Presenter: Song Ding – Southeast University

Resonant Converters

11:30 AM – 1:30 PM ET

D02.4 - Decoupling Power Sharing Control Scheme with the Fast Dynamic Response for a Dual-Input Dual-Active-Bridge DC-DC Converter Topology
Location: HALL WA3

Technical Dialogue Presenter: Pasan Gunawardena – University of Alberta

Bidirectional dc/dc converters

11:30 AM – 1:30 PM ET

D02.5 - Trans-Inductors Versus Discrete Inductors in Multiphase Voltage Regulators: An Analytical and Experimental Comparative Study
Location: HALL WA3

Technical Dialogue Presenter: Horthense D. Tamdem, MSEE – Intel corporation

Point-of-Load (PoL) and Multi-Phase Converters

11:30 AM – 1:30 PM ET

D02.6 - 5-Level E-Type Dual Active Bridge Converter for Photovoltaic Applications
Location: HALL WA3

Technical Dialogue Presenter: Stefano Menicanti – Roma Tre University

Bidirectional dc/dc converters

11:30 AM – 1:30 PM ET

D02.7 - Asymmetrically Driven HB-LLC Resonant Converter Integrated in Low-Power IoT Devices
Location: HALL WA3

Technical Dialogue Presenter: Tom Urkin – PEMIC center - Ben Gurion University of the Negev

Resonant Converters

11:30 AM – 1:30 PM ET

D02.8 - A Two-Phase Hybrid Switched Capacitors Converter with Interleaving Control Scheme for Flying Capacitors Self-Balancing
Location: HALL WA3

Technical Dialogue Presenter: Weidong Xue – Fudan University

Point-of-Load (PoL) and Multi-Phase Converters

11:30 AM – 1:30 PM ET

D02.9 - Magnetics Analysis and Optimization Techniques for a 2 MHz GaN-Based Active-Clamped Isolated SEPIC Converter
Location: HALL WA3

Technical Dialogue Presenter: Stefano Cabizza, PhD – University of Padova

Resonant Converters

11:30 AM – 1:30 PM ET

D02.10 - Virtually Isolated Class E Converter with Coupled Capacitors
Location: HALL WA3

Technical Dialogue Presenter: Geon-Hong Min – Seoul National University

Resonant Converters

11:30 AM – 1:30 PM ET

D02.11 - Comparison of Three Buck Topologies for Wide Output Voltage Applications
Location: HALL WA3

Technical Dialogue Presenter: Oisín Anderson – University of Galway

Point-of-Load (PoL) and Multi-Phase Converters

11:30 AM – 1:30 PM ET

D02.12 - Design and Analysis of A Novel Current-Fed Three Level Three Limb TAB Converter with Auxilary Inductor for DC Micro-Grid Application
Location: HALL WA3

Technical Dialogue Presenter: Subhasish Pal – Indian Institute of Technology

Bidirectional dc/dc converters

11:30 AM – 1:30 PM ET

D02.13 - Design and Implementation of a Five-Port LLC Converter for PV Applications
Location: HALL WA3

Technical Dialogue Presenter: Reza Rezaii – University of Central Florida

Resonant Converters

11:30 AM – 1:30 PM ET

D02.14 - Non-Dissipative Regenerative Snubber for Isolated DC-DC Ćuk Converter
Location: HALL WA3

Technical Dialogue Presenter: David Arturo Porras Fernandez – University of Arkansas

Hard- and Soft-Switched

11:30 AM – 1:30 PM ET

D02.15 - Multi-Frequency Trans-Inductor Voltage Regulator
Location: HALL WA3

Technical Dialogue Presenter: Stefano Saggini, PhD – Università di Udine DPIA

Voltage Regulator Modules (VRM)

11:30 AM – 1:30 PM ET

D03 - DC-DC Converters II
Location: HALL WA3

Technical Dialogue Session Chair: Juan Rivas – Stanford University

11:30 AM – 1:30 PM ET

D03.1 - Controller Design and Phase Current Balancing for Fast Dynamic Performance in Voltage Mode Controlled Multiphase Buck Converters
Location: HALL WA3

Technical Dialogue Presenter: Teja Golla – IIT Kharagpur

Point-of-Load (PoL) and Multi-Phase Converters

11:30 AM – 1:30 PM ET

D03.2 - Analysis of Resonant PWM Active-Clamp Ćuk DC/DC Converter
Location: HALL WA3

Technical Dialogue Presenter: Shantanu Gupta – UIC

Resonant Converters

11:30 AM – 1:30 PM ET

D03.3 - 400V-to-48V Transformer-Isolated Stacked Active Bridge Converter with Integrated Magnetics
Location: HALL WA3

Technical Dialogue Presenter: Branko Majmunović – University of Colorado Boulder, Texas Instruments

Hard- and Soft-Switched

11:30 AM – 1:30 PM ET

D03.4 - Improvement Technique for Power Efficiency of Dab DC-DC Converters by Reducing Hard Switching and Copper Losses in Light Loads
Location: HALL WA3

Technical Dialogue Presenter: Masahiro Tajiri – Nagasaki University

Bidirectional dc/dc converters

11:30 AM – 1:30 PM ET

D03.5 - A Practical and Cost Effective Wide Range 6kW LLC Converter for EV Charging Infrastructure
Location: HALL WA3

Technical Dialogue Presenter: Alfio Scuto – STMicroelectronics

Resonant Converters

11:30 AM – 1:30 PM ET

D03.6 - Active Clamp Push-Pull Full-Bridge Bidirectional DC-DC Converter with Wide Load Range
Location: HALL WA3

Technical Dialogue Presenter: Heng Xi – Nanjing University of Aeronautics and Astronautics

Bidirectional dc/dc converters

11:30 AM – 1:30 PM ET

D03.7 - Study on Improving Line Frequency Ripple of Bidirectional DC-DC CLLC Resonant Converter
Location: HALL WA3

Technical Dialogue Presenter: Kuo-Fu Liao

Bidirectional dc/dc converters

11:30 AM – 1:30 PM ET

D03.8 - A Multi-Phase Series Capacitor Trans-Inductor Voltage Regulator with High Switching Frequency and Fast Dynamic Response
Location: HALL WA3

Technical Dialogue Presenter: Liang Wang – ShanghaiTech University

Point-of-Load (PoL) and Multi-Phase Converters

11:30 AM – 1:30 PM ET

D03.9 - High-Frequency Fully-ZVS Isolated Current-Fed Bidirectional DC-DC Converter
Location: HALL WA3

Technical Dialogue Presenter: Zahra Saadatizadeh – University of Arkansas

Bidirectional dc/dc converters

11:30 AM – 1:30 PM ET

D03.10 - Open Circuit Switch Fault Management Method of a Multi-Phase Synchronous Buck Converter for EV Charging Application
Location: HALL WA3

Technical Dialogue Presenter: Md Rashed Hassan Bipu – NC State University

Bidirectional dc/dc converters

11:30 AM – 1:30 PM ET

D03.11 - A 400W, 99.3% Efficient GaN Buck-Boost Converter
Location: HALL WA3

Technical Dialogue Presenter: Alex Q. Huang – University of Texas at Austin

Hard- and Soft-Switched

11:30 AM – 1:30 PM ET

D03.12 - A Reconfigurable Modular Switched Capacitor Structure for High Efficiency Over a Wide Input Voltage Range
Location: HALL WA3

Technical Dialogue Presenter: PENG FANG, PhD – University of Minnesota Duluth

Hard- and Soft-Switched

11:30 AM – 1:30 PM ET

D03.13 - Bootstrap Operation in eGaN-Based Full-Wave ZCS Quasi-Resonant Synchronous Buck Converter for Server Application
Location: HALL WA3

Technical Dialogue Presenter: Anwesha Mukhopadhyay, MTech – Indian Institute of Science

Point-of-Load (PoL) and Multi-Phase Converters

11:30 AM – 1:30 PM ET

D03.14 - Deep-Learning-Based Fault Detection and Location Method Applied on Isolated DC-DC Converter
Location: HALL WA3

Technical Dialogue Presenter: Amin Ashraf Gandomi – University of California Santa Cruz

Hard- and Soft-Switched

11:30 AM – 1:30 PM ET

D03.15 - Superimposed Quadratic Buck Converter for High-Efficiency Direct 48V/1V Applications
Location: HALL WA3

Technical Dialogue Presenter: Jin Woong Kwak – The University of Texas at Dallas

Point-of-Load (PoL) and Multi-Phase Converters

11:30 AM – 1:30 PM ET

D04 - Utility Interface
Location: HALL WA3

Technical Dialogue Session Chair: Jaber Abu Qahouq, PhD – The University of Alabama

Technical Dialogue Session Chair: Jonathan W. Kimball – Missouri University of Science and Technology

11:30 AM – 1:30 PM ET

D04.1 - Improvement of Motor Side Converter Voltage Using Common Mode Filter at the Grid Side Converter in a Grid Connected Motor Drive System
Location: HALL WA3

Technical Dialogue Presenter: Gopal Mondal – Siemens AG

Power Quality, UPS, Filters

11:30 AM – 1:30 PM ET

D04.3 - Conduction Performance Evaluation of Power Semiconductor Device Technologies for Solid-State DC Breakers
Location: HALL WA3

Technical Dialogue Presenter: Andreas Giannakis – Norwegian University of Science and Technology

Power Quality, UPS, Filters

11:30 AM – 1:30 PM ET

D04.4 - Droop Control Strategy for Series-Connected Current-Source Inverter Based Offshore Wind Energy Conversion System
Location: HALL WA3

Technical Dialogue Presenter: Hang Gao – Washington State University Vancouver

Power Generation, Transmission and Distribution

11:30 AM – 1:30 PM ET

D04.5 - A Hybrid Solid State Transformer (HSST) Based on a Two Stage Isolated Solid State Transformer (SST) : Control and Modulation
Location: HALL WA3

Technical Dialogue Presenter: Sanjay Rajendran – University of Texas at Austin

Solid-State Transformers

11:30 AM – 1:30 PM ET

D04.6 - Mode Switching of H-Bridge Time-Sharing Multiplexing
Location: HALL WA3

Technical Dialogue Presenter: Chongbin Zhao – Tsinghua University

Solid-State Transformers

11:30 AM – 1:30 PM ET

D04.7 - PV Inverter Control Algorithm Using Reinforcement Learning to Mitigate the Duck Curve Problem
Location: HALL WA3

Technical Dialogue Presenter: Yu-Quan Chen – National Taiwan University

SmartGrid

11:30 AM – 1:30 PM ET

D04.8 - A High Power Density 75kVA Air-Cooled SiC Intelligent Power Stage (IPS) as a Universal Building Block for Grid Applications
Location: HALL WA3

Technical Dialogue Presenter: Zibo Chen – The University of Texas at Austin

Bidirectional grid interface converters

11:30 AM – 1:30 PM ET

D04.9 - SiC Bidirectional Solid-State Circuit Breaker with Soft-Start Function for Motor Control Center
Location: HALL WA3

Technical Dialogue Presenter: Jiale Zhou – University of North Carolina at Charlotte

Power Generation, Transmission and Distribution

11:30 AM – 1:30 PM ET

D04.10 - Development of a High Frequency/Power Three-Port SST Suitable for Solar PV/Battery Interface
Location: HALL WA3

Technical Dialogue Presenter: Saban Ozdemir – Gazi University

Solid-State Transformers

11:30 AM – 1:30 PM ET

D04.11 - A Virtual Impedance Method Based on Power Adaptive Compensator for Cascaded DC System
Location: HALL WA3

Technical Dialogue Presenter: Xinyang Su – Xi’an Jiaotong University

Power Quality, UPS, Filters

11:30 AM – 1:30 PM ET

D04.12 - Three Phase Dual Active Bridges with Integrated Series Inductance Using 10-kV SiC MOSFETs for Medium-Voltage Grid Applications
Location: HALL WA3

Technical Dialogue Presenter: Roderick A. Gomez – University of Arkansas

Solid-State Transformers

11:30 AM – 1:30 PM ET

D04.13 - Scalable Auxiliary Power Supply System for SiC-Based Modular Medium Voltage Converters
Location: HALL WA3

Technical Dialogue Presenter: Ning Yan – Virginia Polytechnic Institute and State University

Distributed Energy Systems

11:30 AM – 1:30 PM ET

D04.14 - Design Challenges of the 22 kV Solid-State Switch for Capacitor Discharge Application Based on 3.3 kV SiC MOSFET Super-Cascode
Location: HALL WA3

Technical Dialogue Presenter: Ning Yan – Virginia Polytechnic Institute and State University

Power Generation, Transmission and Distribution

11:30 AM – 1:30 PM ET

D04.15 - Optimal Ratio of Grid-Forming to Grid-Following Inverters Towards Resilient Power Electronics Dominated Grids
Location: HALL WA3

Technical Dialogue Presenter: Alireza Zare – University of Illinois Chicago

SmartGrid

11:30 AM – 1:30 PM ET

D04.17 - Switching Loss Analysis of Three-Phase Three-Level Neutral Point Clamped Converter Pole Enabled by Series-Connected 10 kV SiC MOSFETs
Location: HALL WA3

Technical Dialogue Presenter: Nithin Kolli – North Carolina State University

Bidirectional grid interface converters

11:30 AM – 1:30 PM ET

D05 - Motor Drives & Inverter
Location: HALL WA3

Technical Dialogue Session Chair: Rakib Islam – American Axle & Manufacturing

Technical Dialogue Session Chair: Ali Safayet – Halla Mechatronics

11:30 AM – 1:30 PM ET

D05.1 - Improved Q-MRAS Based Online Rotor Time Constant Compensation for IFOC Induction Motor Drives
Location: HALL WA3

Technical Dialogue Presenter: Heonyoung Kim – Renesas Electronics America

AC, DC, BLDC Motor Drives

11:30 AM – 1:30 PM ET

D05.2 - Damping Controller Integrated Into Output Current Control Loop and Design for Multiple Servo Drive Systems Connected to Common DC-Bus Line
Location: HALL WA3

Technical Dialogue Presenter: Katsuki Miura – Nagaoka University of Technology

AC, DC, BLDC Motor Drives

11:30 AM – 1:30 PM ET

D05.3 - Carrier Based Pulse Width Modulation for Low Distortion Sinewave Generation Using Hybrid Harmonics Elimination Method
Location: HALL WA3

Technical Dialogue Presenter: Ron Vaizman – Ben Gurion University

High Performance Drives

11:30 AM – 1:30 PM ET

D05.4 - Dead Time Reduction Strategy for GaN-Based Low-Voltage Inverter in Motor Drive System
Location: HALL WA3

Technical Dialogue Presenter: Vincenzo Barba – Politecnico di Torino

AC, DC, BLDC Motor Drives

11:30 AM – 1:30 PM ET

D05.5 - Optimal Low Switching Frequency PWM Pattern for a Three-Level Neutral Point Clamped (NPC) Inverter
Location: HALL WA3

Technical Dialogue Presenter: Aathira Karuvaril Vijayan – McMaster University

Single- and Multi-Phase Inverters

11:30 AM – 1:30 PM ET

D05.6 - Temperature Estimation in Induction Motors Using Machine Learning
Location: HALL WA3

Technical Dialogue Presenter: Panagiotis Kakosimos, PhD – ABB AB Corporate Research

AC, DC, BLDC Motor Drives

11:30 AM – 1:30 PM ET

D05.7 - Encoderless Predictive Control of PMSM Drives Combining Sliding-Mode and Luenberger Observers
Location: HALL WA3

Technical Dialogue Presenter: Panagiotis Kakosimos, PhD – ABB AB Corporate Research

High Performance Drives

11:30 AM – 1:30 PM ET

D05.9 - Compensating the Performance of PMSM Based Electrified Powertrain Through Sliding Mode Control
Location: HALL WA3

Technical Dialogue Presenter: Athar Hanif – The Ohio State University

AC, DC, BLDC Motor Drives

11:30 AM – 1:30 PM ET

D05.10 - Maximum Torque Per Ampere Control Algorithm for an Interior Permanent Magnet Synchronous Motor Drive Reflecting the PM Flux Linkage Variations
Location: HALL WA3

Technical Dialogue Presenter: Sungmin Choi – Chonbuk national university

AC, DC, BLDC Motor Drives

11:30 AM – 1:30 PM ET

D05.11 - The Duality Droop Control for Grid-Tied Cascaded Microinverter
Location: HALL WA3

Technical Dialogue Presenter: Maohang Qiu – University of Dayton

Single- and Multi-Phase Inverters

11:30 AM – 1:30 PM ET

D05.12 - Switching Loss Reduction of Dual Inverters Using Isolated Voltage Sources Fed an Open-End Winding Interior Permanent Magnet Synchronous Motor
Location: HALL WA3

Technical Dialogue Presenter: Hyung-Woo Lee – Ajou University

AC, DC, BLDC Motor Drives

11:30 AM – 1:30 PM ET

D05.14 - Dynamic Level Shift Control Scheme for Power Loss Reduction in T-Type Traction
Location: HALL WA3

Technical Dialogue Presenter: Shivam Chaturvedi – University of Michigan Dearborn

Single- and Multi-Phase Inverters

11:30 AM – 1:30 PM ET

D05.17 - Gallium-Nitride (GaN) Transistor Design for Transient-Overload Power Applications
Location: HALL WA3

Technical Dialogue Presenter: Jinshui Zhang – Duke University

Single- and Multi-Phase Inverters

11:30 AM – 1:30 PM ET

D06 - Devices & Components
Location: HALL WA3

Technical Dialogue Session Chair: Zheyu Zhang – Clemson University

Technical Dialogue Session Chair: Ali Safayet – Halla Mechatronics

11:30 AM – 1:30 PM ET

D06.1 - DC Series ARC Fault Detection and Extinguishing Method Using Input Capacitor Design
Location: HALL WA3

Technical Dialogue Presenter: Hwa-Pyeong Park – Kumoh National Institute of Technology

Interconnects and Fuses

11:30 AM – 1:30 PM ET

D06.2 - Investigation of the Parasitic Inductance Influence on the Short-Circuit Behaviour of High Voltage IGBTs
Location: HALL WA3

Technical Dialogue Presenter: He Du – Kyushu Institute of Technology

Power Silicon MOSFETs, BJTs, IGBTs

11:30 AM – 1:30 PM ET

D06.3 - Assessment of MOSFET Switching Losses in an LLC Converter by a Calorimetric Method
Location: HALL WA3

Technical Dialogue Presenter: Alfio Scuto – STMicroelectronics

Power Silicon MOSFETs, BJTs, IGBTs

11:30 AM – 1:30 PM ET

D06.4 - Physics-Based Modeling of Packaging-Related Degradation of IGBT Modules
Location: HALL WA3

Technical Dialogue Presenter: Yichi Zhang – Aalborg University

Power Silicon MOSFETs, BJTs, IGBTs

11:30 AM – 1:30 PM ET

D06.5 - A Method to De-Skew Probes and Estimate Power Loop Inductance of WBG-DPT Circuits
Location: HALL WA3

Technical Dialogue Presenter: Srikrishna N H – Tektronix India Pvt. Ltd.

SiC MOSFETs and BJTs

11:30 AM – 1:30 PM ET

D06.7 - Design and Implementation of Interleaved Flyback Converter with GaN E-HEMT
Location: HALL WA3

Technical Dialogue Presenter: Kuo-Fu Liao

GaN HEMTs

11:30 AM – 1:30 PM ET

D06.8 - Accuracy Analysis of the LCR Meter-Based Method for C-V Characterization of a Capacitor
Location: HALL WA3

Technical Dialogue Presenter: Zhansen Akhmetov – North Carolina State University

Capacitors, Supercapacitors

11:30 AM – 1:30 PM ET

D06.9 - A GaN Based LCC Converter for Lithium-Ion Battery Chargers
Location: HALL WA3

Technical Dialogue Presenter: Harsha Ademane – ST Microelectronics

GaN HEMTs

11:30 AM – 1:30 PM ET

D06.10 - Design, Packaging, and Empirical Characterization of 1 kV Vertical GaN P-N Diode
Location: HALL WA3

Technical Dialogue Presenter: Sadab Mahmud – University of Toledo

Fast Recovery Diodes

11:30 AM – 1:30 PM ET

D06.11 - A GaN DC-DC Converter with In-Situ Detection of Aging-Induced Coss Changes for Device State-of-Health Determination
Location: HALL WA3

Technical Dialogue Presenter: Samantha K. Murray, MASc – University of Toronto

GaN HEMTs

11:30 AM – 1:30 PM ET

D06.12 - A Self-Powered Two-Terminal MEMS Based Relay with Advanced Control Functions
Location: HALL WA3

Technical Dialogue Presenter: Pallab Midya – Menlo Microsystems Inc.

Interconnects and Fuses

11:30 AM – 1:30 PM ET

D06.13 - Switching Performance Evaluation of 650 V Vertical GaN Fin JFET
Location: HALL WA3

Technical Dialogue Presenter: Ruizhe Zhang – Virginia Polytechnic Institute and State University

GaN HEMTs

11:30 AM – 1:30 PM ET

D06.14 - Paralleling 650 V/150 a GaN HEMTs for Cryogenically Cooled Solid-State Circuit Breaker Applications
Location: HALL WA3

Technical Dialogue Presenter: Ching-Hsiang Yang – University of Tennessee

GaN HEMTs

11:30 AM – 1:30 PM ET

D06.15 - Design of a Medium Voltage PCB-Based Power Bus Considering Current Carrying Capacity for Insulation Integrity in a 6 kV 500 kW Converter
Location: HALL WA3

Technical Dialogue Presenter: Joshua Stewart – Virginia Polytechnic Institute and State University

Interconnects and Fuses

11:30 AM – 1:30 PM ET

D06.16 - Impact of Conduction Current on Output Capacitance Loss in GaN HEMTs
Location: HALL WA3

Technical Dialogue Presenter: Qihao Song – Virginia Tech

GaN HEMTs

11:30 AM – 1:30 PM ET

D07 - Power Converter Design, Packaging, & Integration
Location: HALL WA3

Technical Dialogue Session Chair: Adam Skorek – University of Québec at Trois-Rivières

Technical Dialogue Session Chair: Zhehui Guo – Center for Advanced Power Systems Florida State University

11:30 AM – 1:30 PM ET

D07.1 - A Gallium Nitride Intelligent Power Module Based on Bonding Wire Interconnection
Location: HALL WA3

Technical Dialogue Presenter: Yilong Yao – State Key Laboratory of Electrical Insulation and Power Equipment

Power Modules / High Density Design

11:30 AM – 1:30 PM ET

D07.2 - A Compact Hybrid Sensor for Chip-Level Online Current Sensing in Press-Pack Power Module
Location: HALL WA3

Technical Dialogue Presenter: Weili Guo – Xi'an Jiaotong University

Quality and System Reliability

11:30 AM – 1:30 PM ET

D07.3 - A Double-Sided Cooling 6.5kV SiC MOSFET Power Module with Insulation Enhancement Design
Location: HALL WA3

Technical Dialogue Presenter: Liangjun Ma – School of Electrical Engineering Xi’an Jiaotong University

Power Modules / High Density Design

11:30 AM – 1:30 PM ET

D07.4 - Analysis of a Transistor-Based On-State Voltage Measurement Circuit for Condition Monitoring of Power Transistors
Location: HALL WA3

Technical Dialogue Presenter: Kevin Muñoz Barón – University of Stuttgart

Quality and System Reliability

11:30 AM – 1:30 PM ET

D07.5 - Reliability Monitoring and Predictive Maintenance of Power Electronics with Physics and Data Driven Approach Based on Machine Learning
Location: HALL WA3

Technical Dialogue Presenter: Yujia Cui – ROCKWELL AUTOMATION INC

Quality and System Reliability

11:30 AM – 1:30 PM ET

D07.6 - Transient Thermal Modeling of Power Semiconductors for Long-Term Load Profiles
Location: HALL WA3

Technical Dialogue Presenter: Xinyue Zhang – Northwestern Polytechnical University

Thermal and EMC Management

11:30 AM – 1:30 PM ET

D07.7 - Highly Reliable Silver Sintering Joints for Power Module Application
Location: HALL WA3

Technical Dialogue Presenter: Sihai Chen – Indium Corporation

Power Electronics Packaging

11:30 AM – 1:30 PM ET

D07.8 - A Capacitive Impedance Control Method for Active Capacitor with Adaptive Parameter Capability
Location: HALL WA3

Technical Dialogue Presenter: Zhihao Lin – Aalborg University

Quality and System Reliability

11:30 AM – 1:30 PM ET

D07.10 - High-Temperature (250°C) SiC Power Module Integrated with LTCC-Based Isolated Gate Driver
Location: HALL WA3

Technical Dialogue Presenter: Salahaldein Ahmed – UA

Power Electronics Packaging

11:30 AM – 1:30 PM ET

D07.12 - Advanced GaN IPM for High-Frequency Converter Applications Enabled with Thin-Substrates
Location: HALL WA3

Technical Dialogue Presenter: Sourish S Sinha – FREEDM Systems Center North Carolina State University

Power Modules / High Density Design

11:30 AM – 1:30 PM ET

D07.13 - Packaging and Characterization of an Ultra Compact 1200V PCB SiC MOSFET Half-Bridge Module
Location: HALL WA3

Technical Dialogue Presenter: Wei-Jung Hsu – University of Texas at Austin

Power Modules / High Density Design

11:30 AM – 1:30 PM ET

D07.14 - Hybrid Power Module: Silicon and SiC Combination – Technical Win or Pain
Location: HALL WA3

Technical Dialogue Presenter: Ondrej Picha – onsemi

Power Modules / High Density Design

11:30 AM – 1:30 PM ET

D07.15 - Alternating Sequence and Zero Vector Modulation with Reduced Switching Losses and Common-Mode Voltage in Current Source Inverters
Location: HALL WA3

Technical Dialogue Presenter: Sangwhee Lee – University of Wisconsin-Madison

Thermal and EMC Management

11:30 AM – 1:30 PM ET

D07.16 - Decoupling Device for Small Commutation Loop and Improved Switching Performance with Large Power Transistors
Location: HALL WA3

Technical Dialogue Presenter: Logan Horowitz – UC Berkeley

Power Modules / High Density Design

11:30 AM – 1:30 PM ET

D07.17 - A Mechanically Ultra-Thin Flying Capacitor Multilevel Converter with Embedded Passive Components
Location: HALL WA3

Technical Dialogue Presenter: Nicole Stokowski – University of California Berkeley

Embedding technologies, 3D packaging, and additive manufacturing

11:30 AM – 1:30 PM ET

D07.18 - Thermal Mapping of Power Modules Using Optical Fibers During AC Power Cycling Tests
Location: HALL WA3

Technical Dialogue Presenter: Francesco Iannuzzo – Aalborg University

Technical Dialogue Presenter: Kaichen Zhang, MA – Aalborg University

Thermal and EMC Management

11:30 AM – 1:30 PM ET

D07.19 - 3.3 kV Low-Inductance Full SiC Power Module
Location: HALL WA3

Technical Dialogue Presenter: Yuxiang Chen – Univerity of Arkansas

Power Modules / High Density Design

11:30 AM – 1:30 PM ET

D08 - Modeling & Simulation
Location: HALL WA3

Technical Dialogue Session Chair: Shajjad Chowdhury – Oak Ridge National Lab

Technical Dialogue Session Chair: Dinesh Kumar, PhD – Global Research & Development Center, Danfoss Drives A/S

11:30 AM – 1:30 PM ET

D08.1 - Analysis of Switching Voltage Regulator Noise Coupling to Signal via Using a Novel Simulation Approach
Location: HALL WA3

Technical Dialogue Presenter: Soumya Singh – DELL Technologies

Device and Component Modeling

11:30 AM – 1:30 PM ET

D08.2 - Power Hardware-in-the-Loop Simulation to Verify Protection Coordination for DC Microgrid
Location: HALL WA3

Technical Dialogue Presenter: Kazuki Watanabe – Mitsubishi Heavy Industries Ltd.

Rapid Prototyping

11:30 AM – 1:30 PM ET

D08.3 - Performance Comparison of Miniaturized Isolation Transformer Topologies
Location: HALL WA3

Technical Dialogue Presenter: Yue Wu – Dartmouth

Device and Component Modeling

11:30 AM – 1:30 PM ET

D08.4 - Comprehensive Analysis and Design Optimization of the Dual Active Bridge DC-DC Converter with Finite Magnetizing Inductance
Location: HALL WA3

Technical Dialogue Presenter: Harsha Vardhan – University of Sheffield

Circuits and Systems

11:30 AM – 1:30 PM ET

D08.5 - Heat Cycle Failure Point Prediction by 3D Thermal Stress Analysis for Medium Voltage Power Module
Location: HALL WA3

Technical Dialogue Presenter: Masaki Takahashi – Aalborg university

Device and Component Modeling

11:30 AM – 1:30 PM ET

D08.6 - A Virtual Prototyping System for Silicon-Carbide Power Modules
Location: HALL WA3

Technical Dialogue Presenter: James Victory – ON Semiconductor

Technical Dialogue Presenter: Klaus Neumaier – onsemi

Rapid Prototyping

11:30 AM – 1:30 PM ET

D08.7 - An Implementation of Dowell Model with Neural Network to Foil Winding Transformer
Location: HALL WA3

Technical Dialogue Presenter: Yu Hsin Wu – Nagoya University

Device and Component Modeling

11:30 AM – 1:30 PM ET

D08.8 - Development of Simulation Prediction Techniques for Low Frequency Emissions
Location: HALL WA3

Technical Dialogue Presenter: Yanwen Lai – University of Florida

Software Tools

11:30 AM – 1:30 PM ET

D08.9 - Switching Converter Circuits Representation in CCM & DCM Using Graph Neural Network
Location: HALL WA3

Technical Dialogue Presenter: Ahmed Khamis – University at Albany SUNY

Circuits and Systems

11:30 AM – 1:30 PM ET

D08.10 - Circuit Structure Dependent Multi-Variable Regression Model Based Predictions for DC-DC Converters
Location: HALL WA3

Technical Dialogue Presenter: Ahmed Khamis – University at Albany SUNY

Circuits and Systems

11:30 AM – 1:30 PM ET

D08.11 - A Systematic Parasitic Capacitance Extraction Procedure for Three Level Neutral Point Clamped Inverter Modules
Location: HALL WA3

Technical Dialogue Presenter: Shin-Yu Chen – Center for Power Electronics Systems Virginia Tech

Parasitics

11:30 AM – 1:30 PM ET

D09 - Control I
Location: HALL WA3

Technical Dialogue Session Chair: Jaber Abu Qahouq, PhD – The University of Alabama

11:30 AM – 1:30 PM ET

D09.1 - Time Domain Analysis of Series-Resonant Converter in Auxiliary Power Supply for Medium-Voltage Converter
Location: HALL WA3

Technical Dialogue Presenter: Zhixing Yan – Aalbory University

Gate Drive Circuits

11:30 AM – 1:30 PM ET

D09.2 - Dynamic Modeling of Peak Current Mode Controlled Two-Phase PWM Converters with Coupled Inductors
Location: HALL WA3

Technical Dialogue Presenter: Arvind Sivakumar – University of Colorado-Boulder

Current-Mode and Voltage-Mode Control

11:30 AM – 1:30 PM ET

D09.3 - Enhanced Model Predictive Nearest Level Control for 5-Level Flying Capacitor Multilevel Converter, Hardware Implementation and Comparison
Location: HALL WA3

Technical Dialogue Presenter: Armin Ebrahimian – Marquette University

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D09.4 - Stability Impact of Hybrid Synchronization Strategy on Virtual-Admittance-Based Grid-Forming Inverters
Location: HALL WA3

Technical Dialogue Presenter: Liang Zhao – Aalborg University

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D09.5 - Issues of Impedance Emulation of Converter-Based Grid Emulator for LVRT Test
Location: HALL WA3

Technical Dialogue Presenter: Zejie Li, PhD – Department of Energy Aalborg University

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D09.6 - Surge Current Reduction in LLC Resonant Converter with a Hybrid Control Strategy of PFM and PSM for Expansion of Output Voltage Range
Location: HALL WA3

Technical Dialogue Presenter: Ryo Moriyasu – Kyushu University

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D09.7 - Grid-Forming Nature Retaining Fault Ride-Through Control
Location: HALL WA3

Technical Dialogue Presenter: M A Awal, PhD – Danfoss

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D09.8 - Small-Signal Model of Multiphase Constant On-Time Control with Phase Overlapping
Location: HALL WA3

Technical Dialogue Presenter: Sundaramoorthy Sridhar – Virginia Polytechnic Institute and State University

Current-Mode and Voltage-Mode Control

11:30 AM – 1:30 PM ET

D09.9 - Performance Enhancement of a Dual Active Bridge by a Genetic Algorithm Based Routine for Optimal Parameters of a Cascade Control
Location: HALL WA3

Technical Dialogue Presenter: Nikolai Weitz – Friedrich-Alexander-Universität Erlangen-Nürnberg

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D09.10 - Improved Control for Three-Phase Rectifiers with Constant Power Loads
Location: HALL WA3

Technical Dialogue Presenter: Franco Degioanni – The University of British Columbia

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D09.11 - Sensorless Speed and Vector Control of Induction Motor Based on Rotor Slot Harmonics
Location: HALL WA3

Technical Dialogue Presenter: Aleksandar Milic – School of Electrical Eengineering University of Belgrade

Sensor and Sensor-less Control

11:30 AM – 1:30 PM ET

D09.12 - Pre-Charge/Start-Up Strategy for Flying-Capacitor Modular Multilevel Converter (FC-MMC) with Damping of L-C Oscillations
Location: HALL WA3

Technical Dialogue Presenter: Riccardo Breda – University of Udine

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D09.13 - Design-Oriented Dissipativity Robustness Enhancement for Current Control of LCL-Filtered Grid-Following VSCs
Location: HALL WA3

Technical Dialogue Presenter: Shan He – Department of Energy Aalborg University

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D09.14 - Data-Driven Controllability of Power Electronics Under Boundary Conditions – A Physics-Informed Neural Network Based Approach
Location: HALL WA3

Technical Dialogue Presenter: Subham Sahoo – Aalborg University

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D09.15 - Coupled Inductor Analysis and Design for Flying-Capacitor Passive Cross-Connected Arms Modular Multilevel Converter (FC-MMC) for PMSM Drive Application
Location: HALL WA3

Technical Dialogue Presenter: Riccardo Breda – University of Udine

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D10 - Control II
Location: HALL WA3

Technical Dialogue Session Chair: Dorin Neacsu – Technical University of Iasi

11:30 AM – 1:30 PM ET

D10.1 - Small Signal Model of Modular Multilevel Converter with Power Synchronization Control
Location: HALL WA3

Technical Dialogue Presenter: Wentao Liu – Aalborg University

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D10.2 - Passivity-Based Admittance Shaping of LCL-Type Grid-Connected Inverters Using Capacitor Voltage Feedforward Active Damping
Location: HALL WA3

Technical Dialogue Presenter: Linguo Liu – Huazhong University of Science and Technology

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D10.3 - Increasing the Utilization of DC-Link Voltage of a Five-Leg VSI Based on Rotor Angle Control of Dual Induction Motors
Location: HALL WA3

Technical Dialogue Presenter: Dmytro Kondratenko – Gdańsk University of Technology

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D10.4 - Feasibility Study on a Novel Robust Current-Mode Method
Location: HALL WA3

Technical Dialogue Presenter: Fabio Cacciotto – ST Microelectronics

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D10.5 - Staircase Matrix Modulation for the Switched-Capacitor Modular Multilevel Converter with Sensor-Less Voltage Balancing
Location: HALL WA3

Technical Dialogue Presenter: Rami Yehia – Florida State University

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D10.6 - Hybrid Lithium Capacitor Voltage Balancing with Planar Power Inductor for Electric Vehicles and Other Applications
Location: HALL WA3

Technical Dialogue Presenter: Mohammad Al-Smadi – University of Alabama

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D10.7 - Interpretable AI for Power Conversion Control
Location: HALL WA3

Technical Dialogue Presenter: Benjamin Schwabe – Infineon Technologies AG

Digital Control

11:30 AM – 1:30 PM ET

D10.9 - Multi-Sampling Asymmetric Dual-Edge Digital Pulse-Width Modulator
Location: HALL WA3

Technical Dialogue Presenter: Giovanni Bonanno, MSc – University of Padova

Digital Control

11:30 AM – 1:30 PM ET

D10.10 - Digital Implementation of a Current Observer with On-Line Current Sample Correction for PFC Rectifiers
Location: HALL WA3

Technical Dialogue Presenter: Mohsin Ejaz Ahmad – University Paderborn

Sensor and Sensor-less Control

11:30 AM – 1:30 PM ET

D10.11 - An Ultra-Fast Inrush-Current-Free Startup Method for Grid-Tie Inverter Without Voltage Sensors
Location: HALL WA3

Technical Dialogue Presenter: Yuchen He – Florida State University

Digital Control

11:30 AM – 1:30 PM ET

D10.12 - Improved Delta-Sigma Modulator for Direct Switch Control of a DC-DC Converter
Location: HALL WA3

Technical Dialogue Presenter: Bart Bokmans – Eindhoven University of Technology

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D10.13 - Performance of Predictive Control Applied to Active Power Filter
Location: HALL WA3

Technical Dialogue Presenter: Darlan Fernandes – Federal University of Paraiba

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D10.15 - Closed-Loop Current Control of a Buck Converter via Sensing of Optical Emission from a GaN PN Freewheeling Diode
Location: HALL WA3

Technical Dialogue Presenter: Justin Johnston – Naval Postgraduate School

Sensor and Sensor-less Control

11:30 AM – 1:30 PM ET

D11 - Wireless Power Transfer III
Location: HALL WA3

Technical Dialogue Session Chair: Veda Prakash Galigekere – UT Battelle ORNL

Technical Dialogue Session Chair: Joseph Song-Manguelle, PhD – Oak Ridge National Laboratory

11:30 AM – 1:30 PM ET

D11.1 - Advanced Front-End Monitoring Scheme for Inductive Power Transfer Systems Based on Random Forest Regression
Location: HALL WA3

Technical Dialogue Presenter: Kaiyuan Wang – Hong Kong Polytechnic University

Wireless charging

11:30 AM – 1:30 PM ET

D11.2 - Equilibrating Winding Currents in a DC Transformer for Future Electric Transport Application Based on Inductive Power Transfer
Location: HALL WA3

Technical Dialogue Presenter: Miguel Ángel Moya Garrido – Centro de Electrónica Industrial ETSII UPM

Wireless charging

11:30 AM – 1:30 PM ET

D11.3 - Design of Four Plate Capacitive Coupler with Enhanced Safe Operating Region for Electric Vehicle Wireless Charging Applications
Location: HALL WA3

Technical Dialogue Presenter: Deepak Ronanki – University of Ontario Institute of Technology

Wireless charging

11:30 AM – 1:30 PM ET

D11.4 - Dynamic Improvement of Direct Inductive Power Transfer Systems Using Adaptive Model Predictive-Based Phase Shift Control
Location: HALL WA3

Technical Dialogue Presenter: Huiwen Xiao – Hong Kong Polytechnic University

Wireless charging

11:30 AM – 1:30 PM ET

D11.5 - Optimization of Core Size and Harvested Power for Magnetic Energy Harvesters Based on Cascaded Magnetics
Location: HALL WA3

Technical Dialogue Presenter: Min Gao – Florida State University

Energy Harvesting

11:30 AM – 1:30 PM ET

D11.6 - Impedance-Sensing Technique Using a Dual Harmonic/Negative Peak-Detector in Class EF2 Inverters for LCC-Based WPTs
Location: HALL WA3

Technical Dialogue Presenter: Beom Woo Gu – Samsung Electronics

Wireless charging

11:30 AM – 1:30 PM ET

D11.7 - A Single-Inductor Multiple-Output (SIMO) Buck-Boost Hybrid Converter for Multi-Device Wired and Wireless Charging System
Location: HALL WA3

Technical Dialogue Presenter: Albert Ting Leung Lee, PhD – The University of Hong Kong

Wireless charging

11:30 AM – 1:30 PM ET

D11.8 - Robust Unity-Gain Transmitter-Side Operation Mode in IPT Systems for Low Power Applications
Location: HALL WA3

Technical Dialogue Presenter: Alexis Adrian Narvaez Acaro – Universidad de Zaragoza I3A

Wireless charging

11:30 AM – 1:30 PM ET

D11.9 - Exploring Switching Limit of SiC Inverter for Multi-kW Multi-MHz Wireless Power Transfer System
Location: HALL WA3

Technical Dialogue Presenter: Yao Wang – Drexel University

Wireless charging

11:30 AM – 1:30 PM ET

D11.10 - Practical Receiver Coil Design to Improve Coil Selection in a Multi-Coil Wireless Charging System
Location: HALL WA3

Technical Dialogue Presenter: Li Wang – Google LLC

Wireless charging

11:30 AM – 1:30 PM ET

D11.11 - Design of Different Symmetrical Bidirectional WPT Topologies Based on CC and CV Operating Modes for V2G Applications
Location: HALL WA3

Technical Dialogue Presenter: Isaac Wong – North Carolina State University

Wireless charging

11:30 AM – 1:30 PM ET

D12 - Renewable Energy Systems
Location: HALL WA3

Technical Dialogue Session Chair: Jingbo Liu – Eaton

11:30 AM – 1:30 PM ET

D12.1 - An Integrated Charging Equalizer Based on LLC Resonant DC-DC Converter for Series-Connected Battery String in Plug-In Hybrid Electric Vehicle
Location: HALL WA3

Technical Dialogue Presenter: Yiqing Lu – ShanghaiTech University

Energy Storage Systems

11:30 AM – 1:30 PM ET

D12.2 - A Computationally Efficient Model for Large-Scale Energy Storage Systems with Active Voltage Balancing in Modular Multilevel Converters
Location: HALL WA3

Technical Dialogue Presenter: Mohsen Asoodar – KTH Royal Institute of Technology

Energy Storage Systems

11:30 AM – 1:30 PM ET

D12.3 - Battery Aging Behavior Evaluation Under Variable and Constant Temperatures with Real Loading Profiles
Location: HALL WA3

Technical Dialogue Presenter: Yunhong Che – Aalborg University

Energy Storage Systems

11:30 AM – 1:30 PM ET

D12.4 - Bidirectional Power Flow Controllability of Inverter-Dominated Radial Microgrids Incorporating Harmonic Mitigation Capabilities
Location: HALL WA3

Technical Dialogue Presenter: Augusto Matheus Dos Santos Alonso – University of Sao Paulo

Microgrid Systems

11:30 AM – 1:30 PM ET

D12.5 - Dynamic Power Allocation Control for Frequency Regulation Using Hybrid Electrolyzer Systems
Location: HALL WA3

Technical Dialogue Presenter: Manuel Agredano-Torres – KTH Royal Institute of Technology

Grid-Tied Systems

11:30 AM – 1:30 PM ET

D12.6 - Passivity-Based Stability Design of LCL-Filtered Converters: An Overview
Location: HALL WA3

Technical Dialogue Presenter: Jiacheng Sun – Northwestern Polytechnical University

Grid-Tied Systems

11:30 AM – 1:30 PM ET

D12.7 - 4.8 kW Low Profile Compact Single-Phase PV Converter with GaN-HEMT
Location: HALL WA3

Technical Dialogue Presenter: Huizhong Sun – Aalborg University

Photovoltaic (PV) Inverters and Micro Inverters

11:30 AM – 1:30 PM ET

D12.8 - Intelligent Control Approach Applied for Grid-Forming Power Converters
Location: HALL WA3

Technical Dialogue Presenter: Arman Oshnoei – Aalborg University

Grid-Tied Systems

11:30 AM – 1:30 PM ET

D12.9 - System Integration for Grid-Scale Hybrid Battery Technologies
Location: HALL WA3

Technical Dialogue Presenter: Oindrilla Dutta – Sandia National Labs

Energy Storage Systems

11:30 AM – 1:30 PM ET

D12.10 - Overview of Machine Learning-Enabled Battery State Estimation Methods
Location: HALL WA3

Technical Dialogue Presenter: Yingjian Zhuge – ShanghaiTech University

Energy Storage Systems

11:30 AM – 1:30 PM ET

D12.11 - Cell Equalizers Modeling and Analysis Based on Energy Conservation Method
Location: HALL WA3

Technical Dialogue Presenter: Nasim Hasanpour – University of Alberta

Energy Storage Systems

11:30 AM – 1:30 PM ET

D12.12 - Design of a Multi-Chemistry Battery Pack System for Behind-the-Meter Storage Applications
Location: HALL WA3

Technical Dialogue Presenter: Anik Chowdhury, PhD student – University of Akron

Energy Storage Systems

11:30 AM – 1:30 PM ET

D12.14 - A Single-Phase Switched-Capacitor Five-Level Boost Inverter with Boost Factor Improvement
Location: HALL WA3

Technical Dialogue Presenter: Vinh-Thanh Tran – Ho Chi Minh City University of Technology and Education

Photovoltaic (PV) Inverters and Micro Inverters

11:30 AM – 1:30 PM ET

D12.15 - Design and Analysis of a Grid-Tied Non-Isolated Three-Phase Unfolder for Energy Storage Systems
Location: HALL WA3

Technical Dialogue Presenter: Soumya Nag – Indian Institute of Technology

Bi-directional Power Converters

11:30 AM – 1:30 PM ET

D12.16 - Comparative Study of 100kW Three-Level Bidirectional DC-DC Converters for Battery Storage Integration with 1500V PV Inverter
Location: HALL WA3

Technical Dialogue Presenter: Chen Chen – The University of Texas at Austin

Bi-directional Power Converters

11:30 AM – 1:30 PM ET

D12.17 - A High-Robust Control Scheme for the DAB-Based PPP Energy Storage System
Location: HALL WA3

Technical Dialogue Presenter: Nie Hou – Department of Electrical and Computer Engineering University of Alberta

Energy Storage Systems

11:30 AM – 1:30 PM ET

D12.18 - Comparison of String Inverter and Microinverters: A Case Study Concerning Energy Yield and Accuracy of MPPT Algorithms
Location: HALL WA3

Technical Dialogue Presenter: Rodolfo Godoi – Universidade Federal de Uberlândia

Maximum power point tracking (MPPT)

11:30 AM – 1:30 PM ET

D12.19 - Projection of Safe Operation for Inverters Using Artificial Intelligence-Based Stability Criterion
Location: HALL WA3

Technical Dialogue Presenter: Tareq Hossen – Kansas State University

Grid-Tied Systems

11:30 AM – 1:30 PM ET

D12.20 - SOH Prediction and Abnormality Detection of High Power Lithium-Ion Battery Using Incremental Capacity-Based Health Indicator
Location: HALL WA3

Technical Dialogue Presenter: Pyeong-Yeon Lee – Chungnam National University

Energy Storage Systems

11:30 AM – 1:30 PM ET

D12.21 - Embedded Linux Based SOH Prediction Using LSTM Network Considering EV Load Condition
Location: HALL WA3

Technical Dialogue Presenter: Dongho Han – Chungnam National University

Energy Storage Systems

11:30 AM – 1:30 PM ET

D12.22 - Operation and Control of a PV Converter with Enhanced Stability Based on Virtual Impedance Emulation in a Pseudo Resistive Grid
Location: HALL WA3

Technical Dialogue Presenter: Sara Yzdn – Mathworks

Photovoltaic (PV) Inverters and Micro Inverters

11:30 AM – 1:30 PM ET

D13 - Transportation Applications
Location: HALL WA3

Technical Dialogue Session Chair: Dong Cao, PhD – University of Dayton

Technical Dialogue Session Chair: Rasoul Hosseini, PhD – General Motors

11:30 AM – 1:30 PM ET

D13.1 - Universal Bridgeless Reconfigurable Battery Charger with Wide Output Voltage Range for Next-Generation EV Compatibility
Location: HALL WA3

Technical Dialogue Presenter: Harish Karneddi – Indian Institute of Technology Roorkee

Charging Systems

11:30 AM – 1:30 PM ET

D13.2 - A New Medium-Voltage Architecture for Ultra-Fast Electric Vehicle (EV) Charging Stations
Location: HALL WA3

Technical Dialogue Presenter: Ahoora Bahrami – McMaster University

Charging Systems

11:30 AM – 1:30 PM ET

D13.3 - A Comparative Study of Single- and Multi-Cell Three-Level ANPC Inverters for Electric Aircraft Applications
Location: HALL WA3

Technical Dialogue Presenter: Linke Zhou – Mcmaster University

Power Electronics for Aerospace

11:30 AM – 1:30 PM ET

D13.4 - Series DC Arc Fault in More Electric Aircraft
Location: HALL WA3

Technical Dialogue Presenter: Alperen Çalıkoğlu – ASELSAN INC.

Power Electronics for Aerospace

11:30 AM – 1:30 PM ET

D13.5 - Practical Design Consideration and Experimental Validation of SiC MOSFET-Based 50kW Three-Phase PWM Rectifier for EV Charging Station
Location: HALL WA3

Technical Dialogue Presenter: Ju-A Lee – Sungkyunkwan University

Charging Systems

11:30 AM – 1:30 PM ET

D13.6 - Performance of a 500A, Unidirectional IGCT-Based Solid-State DC Circuit Breaker for Electric Vehicle Charging Applications
Location: HALL WA3

Technical Dialogue Presenter: Govind Chavan – ABB Inc.

Power Electronics for Hybrid and Electric Cars

11:30 AM – 1:30 PM ET

D13.7 - A High-Density 200-kW All Silicon Carbide Three-Phase Inverter for Traction Applications
Location: HALL WA3

Technical Dialogue Presenter: Ahmad Al-Hmoud – University of Arkansas

Vehicular Power Electronic Circuits and Systems

11:30 AM – 1:30 PM ET

D13.8 - Control of a Dual-Active-Bridge DC-DC Converter in a MV Grid-Compliant Solid-State Transformer Based DC Fast Charger
Location: HALL WA3

Technical Dialogue Presenter: Shrivatsal Sharma – North Carolina State University

Charging Systems

11:30 AM – 1:30 PM ET

D13.9 - Design and Implementation of a GaN-Based Capacitively-Isolated Hybrid Dickson Switched-Capacitor DC-DC Converter for Space Applications
Location: HALL WA3

Technical Dialogue Presenter: Samantha Coday – University of California, Berkeley

Power Electronics for Aerospace

11:30 AM – 1:30 PM ET

D13.10 - Solar PV Powered PMSM Driven Encoder-Less Electric Vehicle
Location: HALL WA3

Technical Dialogue Presenter: Shadab Murshid – Nanyang Technological University

Vehicular Power Electronic Circuits and Systems

11:30 AM – 1:30 PM ET

D13.11 - A Wide Input Voltage High-Frequency Current-Fed Resonant Inverter for HFAC Electric Vehicle Auxiliary Electrical System
Location: HALL WA3

Technical Dialogue Presenter: Jiagang Li – Nanjing University of Aeronautics and Astronautics

Power Electronics for Hybrid and Electric Cars

11:30 AM – 1:30 PM ET

D13.12 - FPGA-Based Forced Air-Cooled SiC High-Power-Density Inverter for Electrical Aircraft Applications
Location: HALL WA3

Technical Dialogue Presenter: Xiaoyan Liu – University of Dayton

Power Electronics for Aerospace

11:30 AM – 1:30 PM ET

D13.13 - Multi-Objective Parametric Analysis of EV Traction Inverter Between Reliability and Efficiency
Location: HALL WA3

Technical Dialogue Presenter: Lee Gill – Sandia National Laboratories

Vehicular Power Electronic Circuits and Systems

11:30 AM – 1:30 PM ET

D13.14 - A High Power Density SiC Motor Drive for a 6-Phase PMSM
Location: HALL WA3

Technical Dialogue Presenter: Oscar Lopez – Florida State University

Power Electronics for Aerospace

11:30 AM – 1:30 PM ET

D13.16 - Multiport Resonant GaN-Based DC/DC Converter for Automotive On-Board Low-Voltage Bus
Location: HALL WA3

Technical Dialogue Presenter: Dario Metschies – Reese Techware GmbH

Power Electronics for Hybrid and Electric Cars

11:30 AM – 1:30 PM ET

D13.17 - Experimental Evaluation of Cryogenic Performances of Electronic Components for Signal Isolation in Medium Voltage Power Converters
Location: HALL WA3

Technical Dialogue Presenter: Shimul K. Dam – University of Tennessee, Knoxville

Power Electronics for Aerospace

11:30 AM – 1:30 PM ET

D13.18 - GaN-Based 400V/48V DC-DC Converter with 97% Efficiency and PCB Magnetics for Automotive Applications
Location: HALL WA3

Technical Dialogue Presenter: Pranav Raj Prakash, MS – CPES, Virginia Tech

Power Electronics for Hybrid and Electric Cars

11:30 AM – 1:30 PM ET

D14 - Power Electronics Applications II
Location: HALL WA3

Technical Dialogue Session Chair: Jeffery Nilles – Alpha&Omega Semiconductor

Technical Dialogue Session Chair: Jim Spangler – Independent

11:30 AM – 1:30 PM ET

D14.1 - Bus Voltage Frequency and Phase Estimation Method for Induction Heating Appliances
Location: HALL WA3

Technical Dialogue Presenter: Oscar Lucia, PhD – University of Zaragoza

AC-DC-AC Applications and Matrix Converters

11:30 AM – 1:30 PM ET

D14.2 - Control Strategy for Restarting Procedure of Sensorless PMSM Drives Using Indirect Matrix Converter
Location: HALL WA3

Technical Dialogue Presenter: Yeongsu Bak – Keimyung University

AC-DC-AC Applications and Matrix Converters

11:30 AM – 1:30 PM ET

D14.3 - A Batteryless Full Energy Harvesting System for Inside-Engine Temperature Sensors
Location: HALL WA3

Technical Dialogue Presenter: Andreas Schorer – Wuerth Elektronik eiSos Group

Energy Harvesting

11:30 AM – 1:30 PM ET

D14.4 - Avalanche Transistor-Based Nanosecond Pulse Generator in Plasma-Jet-Driven Magneto-Inertial Fusion Systems
Location: HALL WA3

Technical Dialogue Presenter: Yingjian Zhuge – ShanghaiTech University

Defense and Military Power Electronics

11:30 AM – 1:30 PM ET

D14.5 - A Soft-Switching Zeta-Based AC-Link Universal Converter
Location: HALL WA3

Technical Dialogue Presenter: Mojtaba Salehi – Northeastern University

AC-DC-AC Applications and Matrix Converters

11:30 AM – 1:30 PM ET

D15 - Magnetic Applications
Location: HALL WA3

Technical Dialogue Session Chair: Matt Wilkowski – EnaChip

Technical Dialogue Session Chair: George Slama – Würth Elektronik

11:30 AM – 1:30 PM ET

D15.1 - Design Comparison of Different Coupled Inductor Concepts for Voltage Regulators
Location: HALL WA3

Technical Dialogue Presenter: Feiyang Zhu – Virginia Tech

Magnetics applications

11:30 AM – 1:30 PM ET

D15.2 - Controllable Built-In Leakage Inductance for a Novel Matrix Integrated Transformer
Location: HALL WA3

Technical Dialogue Presenter: Feng Jin – CPES

Magnetics applications

11:30 AM – 1:30 PM ET

D15.3 - Exploiting the Depth: Design, Analysis, and Implementation of High-Power-Density High-Frequency Transformers for One Rack Unit CLLC DCX Converters
Location: HALL WA3

Technical Dialogue Presenter: Giacomo Andrioli – University of Udine

Magnetics applications

11:30 AM – 1:30 PM ET

D15.4 - Investigating UU Powder Core Inductor Winding Configurations Influence on DC Bias Inductance
Location: HALL WA3

Technical Dialogue Presenter: Dorai Yelaverthi – ABB INC.

Magnetics applications

11:30 AM – 1:30 PM ET

D16 - High Frequency Magnetics
Location: HALL WA3

Technical Dialogue Session Chair: George Slama – Würth Elektronik

Technical Dialogue Session Chair: Edward Herbert – PSMA

11:30 AM – 1:30 PM ET

D16.1 - High-Density Planar Integrated Magnetics with Common Mode Noise Immunity
Location: HALL WA3

Technical Dialogue Presenter: Junyun Deng – University of Twente

High-frequency magnetics

11:30 AM – 1:30 PM ET

D16.2 - A High Frequency Coupled Inductor Design for High Power Density DC-DC Converters
Location: HALL WA3

Technical Dialogue Presenter: Ahmed Ismail – University of Arkansas

High-frequency magnetics

11:30 AM – 1:30 PM ET

D16.3 - Design and Fabrication of Low-Loss High-Permeability Soft Magnetic Mouldable Composites for High-Frequency Power Inductor Applications
Location: HALL WA3

Technical Dialogue Presenter: Hasan Ahmadian Baghbaderani – Tyndall National Institute

High-frequency magnetics

11:30 AM – 1:30 PM ET

D16.4 - Load Test Method Using Two Small-Capacity Power Supplies for High-Frequency Transformers in Single-Phase Dual Active Bridge Converters
Location: HALL WA3

Technical Dialogue Presenter: Koji Orikawa – Hokkaido University

High-frequency magnetics

11:30 AM – 1:30 PM ET

D17 - Magnetic Modeling & Simulation
Location: HALL WA3

Technical Dialogue Session Chair: Matt Wilkowski – EnaChip

Technical Dialogue Session Chair: Edward Herbert – PSMA

11:30 AM – 1:30 PM ET

D17.1 - Extended Cauer Equivalent Circuit Model of Inductors: Representing Multi-Resonant Characteristics Due to Parasitic Capacitance
Location: HALL WA3

Technical Dialogue Presenter: Yuki Sato – Aoyama Gakuin University

Magnetics modeling and simulations

11:30 AM – 1:30 PM ET

D17.2 - Comparative Evaluation of Different Cables for Magnetic Couplers in Inductive Power Transfer Systems
Location: HALL WA3

Technical Dialogue Presenter: Jesús Acero – Universidad de Zaragoza

Magnetics modeling and simulations

11:30 AM – 1:30 PM ET

D17.3 - Modeling and Analysis of Coupling Effect in Four Legged Core for Multi-Phase Buck Converter
Location: HALL WA3

Technical Dialogue Presenter: Yanda Lyu – Technical University of Denmark

Magnetics modeling and simulations

11:30 AM – 1:30 PM ET

D17.4 - 3D Thermal Modeling of Inductive Power Transfer Coils Based on Basic Thermal Network for Optimization Analysis
Location: HALL WA3

Technical Dialogue Presenter: Alberto Delgado Expósito – CEI, ETSII, Universidad Politécnica de Madrid

Magnetics modeling and simulations

12:00 PM – 1:00 PM ET

PELS Administrative Committee Luncheon
Location: Rosen Centre Salon 15/16

1:00 PM – 5:00 PM ET

PELS Administrative Committee Meeting
Location: Rosen Centre Salon 15/16

1:45 PM – 3:25 PM ET

T33 - LLC Converters
Location: W109B

Technical Lecture Session Chair: Mladen Ivankovic – infineon technologies

Technical Lecture Session Chair: Juan Rivas – Stanford University

1:45 PM – 2:05 PM ET

T33.1 - High Power Density Three-Phase LLC DC/DC Converter with Coupled Resonant Inductor and Wye-Delta Transformer for Aircraft Applications
Location: W109B

Technical Lecture Presenter: Daniel Ríos Linares – ETSII / Universidad Politécnica de Madrid

Resonant Converters

2:05 PM – 2:25 PM ET

T33.2 - Em Noise Mitigation Using Partial Power Regulated LLC Resonant Converter
Location: W109B

Technical Lecture Presenter: Kyung-Wook Heo – UNIST

Resonant Converters

2:25 PM – 2:45 PM ET

T33.3 - Design Consideration for CLLC Converter with High Power and Wide Gain Range
Location: W109B

Technical Lecture Presenter: Chunyang Zhao – Virginia Tech

Resonant Converters

2:45 PM – 3:05 PM ET

T33.4 - Three-Phase LLC DC/DC Converter in Stack Configuration: A Topology for High-Voltage Conversion Ratio Applications
Location: W109B

Technical Lecture Presenter: Daniel Ríos Linares – ETSII / Universidad Politécnica de Madrid

Resonant Converters

3:05 PM – 3:25 PM ET

T33.5 - Shielding Technique of Planar Transformers to Suppress Common-Mode EMI Noise for LLC Converter with Full Bridge Rectifier
Location: W109B

Technical Lecture Presenter: Feng Jin – CPES

Resonant Converters

1:45 PM – 3:25 PM ET

T34 - Design Techniques for Noise & EMI Reduction
Location: W101

Technical Lecture Session Chair: Liming Liu – Eaton

Technical Lecture Session Chair: Yusi Liu – ON Semiconductor

1:45 PM – 2:05 PM ET

T34.1 - Reduction of CM Noise by Minimizing Near-Field Effects in a DC/DC Converter
Location: W101

Technical Lecture Presenter: Tyler McGrew – Center for Power Electronics Systems Virginia Tech

Thermal and EMC Management

2:05 PM – 2:25 PM ET

T34.2 - Impact Assessment of Common-Mode Interference on Communication Cable in a Motor Drive System: Modified Bulk Current Injection Approach
Location: W101

Technical Lecture Presenter: Kushan Choksi – Stony Brook University

Thermal and EMC Management

2:25 PM – 2:45 PM ET

T34.3 - Review of Radiated EMI Modeling and Mitigation Techniques in Power Electronics Systems
Location: W101

Technical Lecture Presenter: Zhedong Ma, PhD candidate – University of Florida

Power Modules / High Density Design

2:45 PM – 3:05 PM ET

T34.4 - Low Conducted-EMI Single-Phase Boost PFC with Sliding Frequency Modulation
Location: W101

Technical Lecture Presenter: Zhansen Akhmetov – North Carolina State University

Thermal and EMC Management

3:05 PM – 3:25 PM ET

T34.5 - Modeling and Analysis of Differential-Mode Noise in a USB-C Charger
Location: W101

Technical Lecture Presenter: Pinhe Wang – Technical University of Denmark

Thermal and EMC Management

1:45 PM – 3:25 PM ET

T35 - Battery System Management & Control
Location: W102

Technical Lecture Session Chair: Adam Skorek – University of Québec at Trois-Rivières

Technical Lecture Session Chair: Weiqiang Chen – ABB

1:45 PM – 2:05 PM ET

T35.1 - Hyperparameter Optimization in Bagging-Based Elm Algorithm for Lithium-Ion Battery State of Health Estimation
Location: W102

Technical Lecture Presenter: Xin Sui – Aalborg University

Energy Storage Systems

2:05 PM – 2:25 PM ET

T35.2 - Hybrid Physics and Machine Learning Models of Desktop-Scale Naval Power Systems
Location: W102

Technical Lecture Presenter: Matthew Overlin – PacMar Technologies

Technical Lecture Presenter: Alexander McBain – PacMar Technologies

Microgrid Systems

2:25 PM – 2:45 PM ET

T35.3 - Electro-Thermal Co-Design of a High-Density Power-Stage for a Reconfigurable-Battery-Assisted Electric-Vehicle Fast-Charger Using Multi-Physics Co-Simulation and Topology Optimization
Location: W102

Technical Lecture Presenter: Seyed Amir Assadi, M.A.Sc – University of Toronto

Energy Storage Systems

2:45 PM – 3:05 PM ET

T35.4 - How to Identify Mechanism Consistency for Lfp/C Batteries During Accelerated Calendar and Cycling Aging Using the Lognormal Distribution
Location: W102

Technical Lecture Presenter: Wendi Guo – Aalborg University

Energy Storage Systems

3:05 PM – 3:25 PM ET

T35.5 - Soft-Switching Analysis of Beat Frequency Modulated Microinverters
Location: W102

Technical Lecture Presenter: Dheeraj Etta – Cornell University

Photovoltaic (PV) Inverters and Micro Inverters

1:45 PM – 3:25 PM ET

T36 - Power Components
Location: W109A

Technical Lecture Session Chair: Lincoln Xue – Oak Ridge National Lab

Technical Lecture Session Chair: Mike Ranjram – Arizona State University

1:45 PM – 2:05 PM ET

T36.1 - iFuse — A Controllable Overcurrent Protection Device for Multi-Inverter Microgrids with High IBR Penetration
Location: W109A

Technical Lecture Presenter: Kartavya Agarwal – Georgia Institute of Technology

Interconnects and Fuses

2:05 PM – 2:25 PM ET

T36.2 - B-Tran™ Optimization and Performance Characterization
Location: W109A

Technical Lecture Presenter: Mouzhi Dong – Ideal Power Inc.

Power Silicon MOSFETs, BJTs, IGBTs

2:25 PM – 2:45 PM ET

T36.3 - Supercapacitor Assisted Extra Low Frequency Power Converters and Surge Protectors: Applying Supercapacitor Assisted Loss Management Concept in Practical Applications
Location: W109A

Technical Lecture Presenter: Thilanga Ariyarathna – Waikato Institute of Technology

Capacitors, Supercapacitors

2:45 PM – 3:05 PM ET

T36.4 - Accelerated Degradation Testing and Failure Phenomenon of Metalized Film Capacitors for AC Filtering
Location: W109A

Technical Lecture Presenter: Bo Yao – Aalborg university

Capacitors, Supercapacitors

3:05 PM – 3:25 PM ET

T36.5 - Modeling and Experimental Verification of a Hybrid DC Breaker During Fault Interruption
Location: W109A

Technical Lecture Presenter: Waqas Ali – Friedrich-Alexander-Universität Erlangen-Nürnberg

Interconnects and Fuses

1:45 PM – 3:25 PM ET

T37 - Power Electronics Applications I
Location: W103

Technical Lecture Session Chair: Jeffery Nilles – Alpha&Omega Semiconductor

Technical Lecture Session Chair: Jim Spangler – Independent

1:45 PM – 2:05 PM ET

T37.1 - Adjustable 4-Level Hybrid Converter for Symbol Power Tracking in 5G New Radio
Location: W103

Technical Lecture Presenter: Hieu Pham – University of California San Diego

Network and Telecommunication Power Electronics

2:05 PM – 2:25 PM ET

T37.2 - Design Techniques in Constant On/Off-Time Peak Current Controlled Boost LED Drivers for Fast Start-Up and Dimming Transient Performance
Location: W103

Technical Lecture Presenter: Dipayan Chatterjee – Indian Institute of Technology (IIT) Kharagpur

Lamp Ballasts and LED Lighting

2:25 PM – 2:45 PM ET

T37.3 - Serving Constant and Pulsed Loads in Naval Power and Energy Systems
Location: W103

Technical Lecture Presenter: Jack Hannum – University of South Carolina

Defense and Military Power Electronics

2:45 PM – 3:05 PM ET

T37.4 - xTMS: A Pulse Generator for Exploring Transcranial Magnetic Stimulation Therapies
Location: W103

Technical Lecture Presenter: Kawsar Ali – University of Oxford

AC-DC-AC Applications and Matrix Converters

3:05 PM – 3:25 PM ET

T37.5 - Flexible PCB Connection Methods for Wearable Energy Harvesting Applications
Location: W103

Technical Lecture Presenter: Katherine Kim – National Taiwan University

Energy Harvesting

1:45 PM – 3:25 PM ET

T38 - On Board Charger
Location: W104

Technical Lecture Session Chair: Rasoul Hosseini, PhD – General Motors

Technical Lecture Session Chair: Zhengda Zhang – TESLA

1:45 PM – 2:05 PM ET

T38.1 - Evaluation of Split-Phase Inverter Mode for 1-ph/3-ph Combo Soft-Switching PFC for On-Board Charger Applications
Location: W104

Technical Lecture Presenter: Tomas Sadilek – Delta Electronics

Power Electronics for Hybrid and Electric Cars

2:05 PM – 2:25 PM ET

T38.2 - An Accurate Loss Model of Single-Stage Single-Phase Isolated PFC Converter for Bidirectional Plug-In EV Charger
Location: W104

Technical Lecture Presenter: Nil Patel – Concordia University

Charging Systems

2:25 PM – 2:45 PM ET

T38.3 - Self-Balanced Two-Output Battery Charger
Location: W104

Technical Lecture Presenter: Christian Branas – Universidad de Cantabria

Charging Systems

2:45 PM – 3:05 PM ET

T38.4 - A Two-Stage Twin-Bus Buck Converter for Battery Charging Applications
Location: W104

Technical Lecture Presenter: Nicola Zanatta, PhD – Dept. of Management and Engineering University of Padova Vicenza

Charging Systems

3:05 PM – 3:25 PM ET

T38.5 - Light-Load and Cross-Load Control of Integrated OBC and APM for Electric Vehicle Applications
Location: W104

Technical Lecture Presenter: Misha Kumar, MSEE – Delta Electronics (Americas) Ltd.

Power Electronics for Hybrid and Electric Cars

1:45 PM – 3:25 PM ET

T39 - Three-Phase AC-DC Converters
Location: W105

Technical Lecture Session Chair: John Lam – York University

Technical Lecture Session Chair: Jungwon Choi – University of Minnesota Twin Cities

1:45 PM – 2:05 PM ET

T39.1 - Direct Three-Phase AC-DC Rectifier with High-Frequency Open-Delta Transformer and Closed Loop Output Voltage Regulation
Location: W105

Technical Lecture Presenter: Erick I. Pool-Mazun – Texas A&M University

Single-Phase and Three-Phase Input

2:05 PM – 2:25 PM ET

T39.2 - Investigation of Non-Unity Power Factor Operation of 3-ph ZVS PFC Rectifier for On-Board Charging of Electric Vehicles
Location: W105

Technical Lecture Presenter: Tomas Sadilek – Delta Electronics

Single-Phase and Three-Phase Input

2:25 PM – 2:45 PM ET

T39.3 - Novel Bidirectional Single-Stage Isolated Three-Phase Buck-Boost PFC Rectifier System
Location: W105

Technical Lecture Presenter: David Menzi – ETH Zurich

Bidirectional AC/DC converters

2:45 PM – 3:05 PM ET

T39.4 - Analysis and Mitigation of Sector Transition Distortions for Unfolding-Based Grid-Tied AC-DC Converters
Location: W105

Technical Lecture Presenter: Aditya Zade – Utah State University

Single-Phase and Three-Phase Input

3:05 PM – 3:25 PM ET

T39.5 - Novel DPWM Method with Suppression of the Voltage Unbalance in the Neutral-Point for Vienna Rectifier
Location: W105

Technical Lecture Presenter: Young-Min Go – Dankook University

Single-Phase and Three-Phase Input

1:45 PM – 3:25 PM ET

T40 - 48V-1V DC-DC Converters
Location: W108

Technical Lecture Session Chair: Cahit Gezgin, PhD – Infineon Technologies AG

Technical Lecture Session Chair: Olivier Trescases – University of Toronto

1:45 PM – 2:05 PM ET

T40.1 - Mini-LEGO: A 1.5-MHz 240-A 48-V-to-1-V CPU VRM with 8.4-mm Height for Vertical Power Delivery
Location: W108

Technical Lecture Presenter: Youssef Elasser – Princeton University

Point-of-Load (PoL) and Multi-Phase Converters

2:05 PM – 2:25 PM ET

T40.2 - MSC-PoL: An Ultra-Thin 220-A/48-to-1-V Hybrid GaN-Si CPU VRM with Multistack Switched Capacitor Architecture and Coupled Magnetics
Location: W108

Technical Lecture Presenter: Ping Wang, PhD – Princeton University

Point-of-Load (PoL) and Multi-Phase Converters

2:25 PM – 2:45 PM ET

T40.3 - Multiphase Half-Bridge Current-Doubler Rectifier: A 93.1%-Efficiency Single-Stage 48V Voltage Regulator with 1.04 kW/in³ Power Density
Location: W108

Technical Lecture Presenter: Xin Lou – Virginia Tech

Voltage Regulator Modules (VRM)

2:45 PM – 3:05 PM ET

T40.4 - A Regulated Cascaded Hybrid Switched-Capacitor Converter with Soft-Charging and Zero Voltage Switching for 48-to-12-V Applications
Location: W108

Technical Lecture Presenter: Ting Ge, PhD – University of California - Berkeley

Hard- and Soft-Switched

3:05 PM – 3:25 PM ET

T40.5 - A 500-A/48-to-1-V Switching Bus Converter: A Hybrid Switched-Capacitor Voltage Regulator with 94.7% Peak Efficiency and 464-W/in³ Power Density
Location: W108

Technical Lecture Presenter: Yicheng Zhu – University of California Berkeley

Point-of-Load (PoL) and Multi-Phase Converters

1:45 PM – 3:25 PM ET

IS25 - WBG Devices
Location: W206

Industry Session Chair: Peter Comiskey, BEng(Hons) – Cambridge GaN Devices

Industry Session Chair: Anuj S. Narain, MSEE – Wolfspeed

1:45 PM – 2:10 PM ET

IS25.1 - An Experimental Study on Parasitic Turn-On (PTO) Due to Crosstalk in Fast Switching Silicon Carbide (SiC) Power MOSFETs
Location: W206

Industry Session Presenter: Shashank Mathur – Wolfspeed

WBG Devices

2:10 PM – 2:35 PM ET

IS25.2 - Improving Switching Performance in SiC Power Modules by Better Balancing Gate Threshold Voltage Differences
Location: W206

Industry Session Presenter: Antonia Lanzafame – STMicroelectronics

WBG Devices

2:35 PM – 3:00 PM ET

IS25.3 - On-Chip and Inline Characterization of SiC-MOSFET Physical Parameters for Optimized Gate Drive Control
Location: W206

Industry Session Presenter: Thoralf Rosahl – Robert Bosch GmbH

WBG Devices

3:00 PM – 3:25 PM ET

IS25.4 - A GaN HEMT with Exceptional Gate Overvoltage Robustness
Location: W206

Industry Session Presenter: Bixuan Wang – CPES Virginia Tech

Industry Session Presenter: Daniel Popa

WBG Devices

1:45 PM – 3:25 PM ET

IS26 - Magnetics
Location: W203ABC

Industry Session Chair: George Slama – Würth Elektronik

Industry Session Chair: Ed Herbert – PSMA

1:45 PM – 2:10 PM ET

IS26.1 - Overview for Specifying a Common Mode Choke for Improved Circuit Performance
Location: W203ABC

Industry Session Presenter: Paul Oppelt – Minntronix Inc.

Magnetics

2:10 PM – 2:35 PM ET

IS26.2 - Considerations for Integrating Inductor Within Transformer
Location: W203ABC

Industry Session Presenter: Victor Quinn – Exxelia

Magnetics

2:35 PM – 3:00 PM ET

IS26.3 - Practical LLC Transformer Design Methodology
Location: W203ABC

Industry Session Presenter: Lucas Nicieza, Sr. – Frenetic

Magnetics

3:00 PM – 3:25 PM ET

IS26.4 - Planar Magnetics: A Case Study Showcasing Software Design Tools That Provide Real-Time Relative Performance Analysis
Location: W203ABC

Industry Session Presenter: Vladimir Alexiev – Power Integrations

Magnetics

1:45 PM – 3:25 PM ET

IS27 - Renewable Energy As Primary Power Generation Sources - Topologies and Control
Location: W202BC

Industry Session Chair: Juan Carlos Balda – University of Arkansas

Industry Session Chair: Ke Ma – Shanghai Jiao Tong University

1:45 PM – 2:10 PM ET

IS27.1 - Grid-forming inverters, an enabling technology to realize the power system paradigm shift, from machines to electronics
Location: W202BC

Industry Session Presenter: Gab-Su Seo – National Renewable Energy Laboratory

Renewable Energy As Primary Power Generation Sources - Topologies and Control

2:10 PM – 2:35 PM ET

IS27.2 - Comparison of Goldwind’s Grid Following and Grid Forming Control based WTGs – Designing & Engineering Application Experience
Location: W202BC

Industry Session Presenter: Rui Sun – Goldwind

Renewable Energy As Primary Power Generation Sources - Topologies and Control

2:35 PM – 3:00 PM ET

IS27.3 - High-Voltage SiC Device Technology for Renewable Energy Applications
Location: W202BC

Industry Session Presenter: Victor V. Veliadis – North Carolina State University

Renewable Energy As Primary Power Generation Sources - Topologies and Control

3:00 PM – 3:25 PM ET

IS27.4 - Universal Grid-Forming Control Paradigms and Their Applications to Renewable Generation
Location: W202BC

Industry Session Presenter: Dominic Gross – University of Wisconsin-Madison

Renewable Energy As Primary Power Generation Sources - Topologies and Control

1:45 PM – 3:25 PM ET

IS28 - Open-Source Design Automation Tools for Power Electronics
Location: W204ABC

Industry Session Chair: Alan Mantooth – University of Arkansas

Industry Session Chair: Kevin Hermanns – PE-Systems GmbH

1:45 PM – 2:10 PM ET

IS28.1 - Using OpenSource Technology and Tools in Power Electronics To Drive Innovation, Boost Productivity and Create Value
Location: W204ABC

Industry Session Presenter: Peter Wilson – University of Bath

Open-Source Design Automation Tools for Power Electronics

2:10 PM – 2:35 PM ET

IS28.2 - Open Source Solutions for Power Magnetics Modeling and Design
Location: W204ABC

Industry Session Presenter: Minjie Chen, PhD – Princeton University

Open-Source Design Automation Tools for Power Electronics

2:35 PM – 3:00 PM ET

IS28.3 - Layout Design Automation in Power Electronics
Location: W204ABC

Industry Session Presenter: Alan Mantooth – University of Arkansas

Open-Source Design Automation Tools for Power Electronics

3:00 PM – 3:25 PM ET

IS28.4 - From machine-readable data sheets for power semiconductors to optimized LLC converters utilizing reinforcement learning strategies
Location: W204ABC

Industry Session Presenter: Kevin Hermanns – PE-Systems GmbH

Open-Source Design Automation Tools for Power Electronics

1:45 PM – 3:25 PM ET

IS30 - Effective, Reliable and Stable Operation of 100% Renewable Powered Grid
Location: W205BC

Industry Session Chair: Grain Philip Adam – NEOM Energy and Water

Industry Session Chair: Ricardo Orfei – Siemens Energy

1:45 PM – 2:10 PM ET

IS30.1 - Dynamic Stability in 100% RES system – Technologies and Operation Challenges
Location: W205BC

Industry Session Presenter: Ricardo Orfei – Siemens Energy

Effective, Reliable and Stable Operation of 100% Renewable Powered Grid

2:10 PM – 2:35 PM ET

IS30.2 - Types of System Study and Methodologies for Modular Static Synchronous Series Compensators (mSSSC) in Renewable Grids Installation
Location: W205BC

Industry Session Presenter: Nuwan Perera – Stantec

Effective, Reliable and Stable Operation of 100% Renewable Powered Grid

2:35 PM – 3:00 PM ET

IS30.3 - Planning 100% Renewable Powered Grid: Challenges and Opportunities
Location: W205BC

Industry Session Presenter: Nand Singh – NEOM Energy and Water (ENOWA)

Effective, Reliable and Stable Operation of 100% Renewable Powered Grid

3:00 PM – 3:25 PM ET

IS30.4 - Power Electronic Dominated Grids: Part─I Enhancing synchronous condenser capabilities by interfacing with a back-to-back converter, and Part─II Integration challenges of Large Electrolyzers
Location: W205BC

Industry Session Presenter: Mojtaba Mohaddes – TransGrid Solutions

Effective, Reliable and Stable Operation of 100% Renewable Powered Grid