Skip to main content

Icon Legend
This session is not in your schedule.
This session is in your schedule. Click again to remove it.

Full Schedule

Full Schedule

  • Tuesday, March 21, 2023
  • 7:00 AM – 5:00 PM ET
    Speaker Ready Room Open
  • 8:00 AM – 9:30 AM ET
    PELS & CPSS Meeting
  • 8:00 AM – 9:30 AM ET
    PELS TC7: Critical Power and Energy Storage Systems
  • 8:00 AM – 10:00 AM ET
    Spouse / Guest Breakfast
  • 8:00 AM – 3:00 PM ET
    Registration Open
  • 8:30 AM – 11:55 AM ET
    IS01 - Core Loss Measurements for Different Materials and Excitations

    Industry Session Chair: Ed Herbert – PSMA

    Industry Session Chair: George Slama – Würth Elektronik

  • 8:30 AM – 11:55 AM ET
    IS02 - Solutions for Data Center and Server Power

    Industry Session Chair: Harry Soin – AEI

    Industry Session Chair: Richard Chung – ST Microelectronics

  • 8:30 AM – 11:55 AM ET
    IS03 - Modern Power Semiconductor Technology Ambitions & Applications

    Industry Session Chair: Sandeep Bahl, PhD – Texas Instruments

    Industry Session Chair: Renee Yawger – Efficient Power Conversion Corporation (EPC)

  • 8:30 AM – 11:55 AM ET
    IS04 - Wireless Power Industry Showcase

    Industry Session Chair: Sanjay Gupta – AirFuel Alliance

    Industry Session Chair: Trish Thomas – AirFuel Alliance

  • 8:30 AM – 11:55 AM ET
    IS05 - Power Innovations and Technologies Enabling Smart Buildings and Cities

    Industry Session Chair: David Chen, SM – Power Integrations

    Industry Session Chair: Lincoln Xue – Oak Ridge National Lab

  • 8:30 AM – 11:55 AM ET
    IS06 - Other Perspectives of Power Electronics - Markets, Society and Policies

    Industry Session Chair: Stephen Oliver, MBA – Navitas Semiconductor

    Industry Session Chair: Elena Barbarini – System Plus Consulting

  • 8:30 AM – 12:00 PM ET
    T01 - DC-DC Converter Applications

    Technical Lecture Session Chair: Xin Zhang, PhD – IBM

    Technical Lecture Session Chair: Kang Wei – Texas Instruments

  • 8:30 AM – 12:00 PM ET
    T02 - Modeling & Design of Power Converters

    Technical Lecture Session Chair: Satarupa Bal – Eaton

    Technical Lecture Session Chair: Suman Debnath – Oak Ridge National Laboratory

  • 8:30 AM – 12:00 PM ET
    T03 - Power Electronic Converters for Renewable Energy System Applications

    Technical Lecture Session Chair: Qingxuan Ma – GaN Systems

    Technical Lecture Session Chair: Weiqiang Chen – ABB

  • 8:30 AM – 12:00 PM ET
    T04 - SiC Power Devices

    Technical Lecture Session Chair: Fei Yang – Texas Instruments

    Technical Lecture Session Chair: Fang Luo – Stony Brook University

  • 8:30 AM – 12:00 PM ET
    T05 - Multilevel Inverter & Modulation Techniques

    Technical Lecture Session Chair: Ali Safayet – Halla Mechatronics

    Technical Lecture Session Chair: Woongkul Lee – Michigan State University

  • 8:30 AM – 12:00 PM ET
    T06 - Gate Drive Circuits

    Technical Lecture Session Chair: Davide Giacomini – Infineon Technologies AG

    Technical Lecture Session Chair: Ilknur Colak – Schneider Electric

  • 8:30 AM – 12:00 PM ET
    T07 - Design Techniques for SiC Power Modules

    Technical Lecture Session Chair: Qing Ye – Texas Instruments

    Technical Lecture Session Chair: Dorai Yelaverthi – Utah State University

  • 8:30 AM – 12:00 PM ET
    T08 - Magnetic Technology

    Technical Lecture Session Chair: Matt Wilkowski – EnaChip

    Technical Lecture Session Chair: Adam Skorek – University of Québec at Trois-Rivières

  • 9:00 AM – 11:00 AM ET
    Expo Hall Open
  • 9:30 AM – 11:00 AM ET
    PELS TC2: Power Components, Integration, and Power ICs
  • 10:00 AM – 11:00 AM ET
    PELS Digital Media Committee
  • 10:00 AM – 11:30 AM ET
    PELS TC1: Control and Modelling of Power Electronics
  • 10:00 AM – 1:00 PM ET
    PELS TC10: Design Methodologies
  • 10:10 AM – 10:45 AM ET
    Break in Expo Hall
  • 11:00 AM – 12:00 PM ET
    PELS Day 2023 Committee Meeting
  • 11:00 AM – 12:00 PM ET
    WIE Committee Meeting
  • 12:00 PM – 1:30 PM ET
    Lunch in Exhibit Hall
  • 1:00 PM – 2:00 PM ET
    PEDG Steering Committee Meeting
  • 1:00 PM – 3:00 PM ET
    PELS VP of Global Intersociety Relations Committee
  • 1:30 PM – 2:00 PM ET
    Battery Cell Testing with 24-bit Multi-functional Testers
  • 1:30 PM – 2:00 PM ET
    Enabling the future with Nexperia wide bandgap and high voltage technologies
  • 1:30 PM – 2:00 PM ET
    High Efficiency Bidirectional Dual Active Bridge (DAB) for Battery Charging Applications
  • 1:30 PM – 2:00 PM ET
    ICeGaN™ 650V Power GaN ICs bring efficiency, robustness and reliability for high power applications to the next level
  • 1:30 PM – 2:00 PM ET
    Soitec solutions, a must-have for EV and autonomous mobility applications?
  • 1:30 PM – 2:00 PM ET
    TBD
  • 1:30 PM – 2:00 PM ET
    The $5B Inflection Point for Motor Drives
  • 1:30 PM – 2:00 PM ET
    TOLL4Tough™
  • 1:30 PM – 2:00 PM ET
    Using a High Bandwidth Loss Probe to measure SiC and GAN FETs losses with a lower bandwidth Oscilloscope.
  • 1:30 PM – 2:00 PM ET
    Wafer level test & burn-in of silicon carbide and gallium nitride devices
  • 1:30 PM – 3:30 PM ET
    PELS TC6: Emerging Power Electronic Technologies
  • 1:30 PM – 5:00 PM ET
    Student Job Fair
  • 2:00 PM – 3:00 PM ET
    PELS TC4: Electrified Transportation Systems
  • 2:00 PM – 3:30 PM ET
    PELS TC5: Sustainable Energy Systems
  • 2:15 PM – 2:45 PM ET
    A new top side cooling is setting the future for SMD power FETs
  • 2:15 PM – 2:45 PM ET
    Breakdown Voltage and Reinforced Isolation – How a Better Flyback Converter is Reshaping EV Architectures
  • 2:15 PM – 2:45 PM ET
    Combine Semikron Danfoss packaging excellence with SiC for EV charging and motor drives
  • 2:15 PM – 2:45 PM ET
    Energy Harvesting and the Nichicon LTO Battery
  • 2:15 PM – 2:45 PM ET
    High Voltage Gate Driver Trends
  • 2:15 PM – 2:45 PM ET
    Pure-Play, High-Speed GaNFast and GeneSiC: The Leading Edge of Next-Gen Power Semiconductors
  • 2:15 PM – 2:45 PM ET
    Putting Qorvo Intelligence Into a 20-cell Battery Pack with a Single-chip Solution
  • 2:15 PM – 2:45 PM ET
    SIMPLIS AC Analysis of PFC Circuits Using New PFC POP Trigger
  • 2:15 PM – 2:45 PM ET
    Surge Residual to Measure Surge Protection Effectiveness
  • 3:00 PM – 3:30 PM ET
    Full-switching Electric Drive FPGA-based Hardware-in-the-Loop Simulation
  • 3:00 PM – 3:30 PM ET
    Gate driver ICs are key system components to enable high efficiency and extreme power density in SMPS for Telecom, Data Center and Computing applications using the latest GaN and SiC power semiconductors..
  • 3:00 PM – 3:30 PM ET
    Measurement Principles for Optimizing your Power Electronics Design
  • 3:00 PM – 3:30 PM ET
    Mersen’s Latest Solutions for SiC, EV and Energy Storage Applications
  • 3:00 PM – 3:30 PM ET
    NBM7100 – an integrated power management solution for extending coin cell battery life in pulsed load IoT applications.
  • 3:00 PM – 3:30 PM ET
    Optimize Power Supply Design in Minutes - PowerEsim
  • 3:00 PM – 3:30 PM ET
    Skyworks’s Power Products Arrive in Sunny Florida
  • 3:00 PM – 3:30 PM ET
    Tips for Efficient Testing in Wide Bandgap Semiconductors – Double Pulse & High Power Safety
  • 3:00 PM – 4:00 PM ET
    Break in Expo Hall
  • 3:30 PM – 5:00 PM ET
    PELS TC11: Aerospace Power
  • 3:45 PM – 4:15 PM ET
    A Hybrid Core Design for High Frequency Power Converters
  • 3:45 PM – 4:15 PM ET
    AC Direct Digitization of Electricity – The NEW emerging solid-state standard for power management
  • 3:45 PM – 4:15 PM ET
    High Performance Inductor Designs Using the Latest Magnetics Materials
  • 3:45 PM – 4:15 PM ET
    Mid-Voltage GaN HEMT (EcoGaN) and Gate Driving Technology
  • 3:45 PM – 4:15 PM ET
    New Solutions for Battery Modeling and Emulation
  • 3:45 PM – 4:15 PM ET
    Online Silicon Carbide (SiC) System Level Simulation Driven by Advanced PLECS Models
  • 3:45 PM – 4:15 PM ET
    Resistor Selection for Pulse Sensitive Applications
  • 3:45 PM – 4:15 PM ET
    Semiconductors & Electronic Components Keeping Your Designs Ahead
  • 3:45 PM – 4:15 PM ET
    TBD
  • 4:30 PM – 6:00 PM ET
    RAP Session 1: Batteries Versus Fuel Cells for Future Electrification Applications
  • 4:30 PM – 6:00 PM ET
    RAP Session 2: Topologies and Circuits for Power Supply on Chip (PWRSOC) Versus Discrete Implementations
  • 4:30 PM – 6:00 PM ET
    RAP Session 3: Where Does High Impact Innovation in Power Electronics Come From: Academia or Industry?
  • 7:00 PM – 9:00 PM ET
    IAS/PELS/PSMA Young Professionals Reception
  • 7:00 PM – 9:00 PM ET
    IEEE IAS/PELS/PSMA Young Professional Reception