Full Schedule

4:00 PM – 7:00 PM ET

Registration Open Saturday
Location: West A Lobby

Speaker: APEC 2023

8:00 AM – 5:00 PM ET

International Future Energy Challenge (IFEC) Information Session
Location: Rosen Centre Salon 16

8:00 AM – 5:00 PM ET

Registration Open Sunday
Location: West A Lobby

Speaker: APEC 2023

8:00 AM – 5:00 PM ET

Speaker Ready Room Open Sunday
Location: W107

Speaker: APEC 2023

1:00 PM – 2:30 PM ET

Lunch on Own Sunday

Speaker: APEC 2023

2:00 PM – 4:30 PM ET

PELS Exec Meeting (Officers Only)
Location: Rosen Centre Salon 15

9:30 AM – 1:00 PM ET

S01 - Power Electronics in Electrified Powertrain: From Electrical Vehicle Market to Semiconductor Selection Guidance
Location: W101

Speaker: Andre Christmann – Infineon Technologies AG

9:30 AM – 1:00 PM ET

S02 - Core Loss Measurement Data for Everyone
Location: W102

Speaker: George Slama – Würth Elektronik

9:30 AM – 1:00 PM ET

S03 - Switch Mode Power Concepts
Location: W103

Speaker: Robert V. White – Embedded Power Labs

9:30 AM – 1:00 PM ET

S04 - Switching Losses Associated with output-Capacitance hysteresis: Now You See Me in Power Devices
Location: W104

Speaker: Jaume Roig – ON Semiconductor

Speaker: Juan Rivas-Davila – Stanford University

Speaker: Elison Matioli – Ecole Polytechnique Federale de Lausanne

9:30 AM – 1:00 PM ET

S05 - Gate-Drive Circuit Design for Wide-Bandgap Power Transistors
Location: W109

Speaker: Eric Persson – Infineon Technologies Americas Corp

9:30 AM – 1:00 PM ET

S06 - Simplified Universal Analysis Techniques for DC-DC Switching Power Converter Feedback Loops Using Matrices and Spreadsheets
Location: W105

Speaker: Haachitaba Mweene – Nexperia USA Inc.

2:30 PM – 6:00 PM ET

S07 - Practical Considerations for the Application of High Power Si and SiC Modules
Location: W101

Speaker: John Donlon – Mitsubishi Electric US

Speaker: Mark Steiner – Mitsubishi Electric US

Speaker: Michael Rogers – Mitsubishi Electric US Inc.

Speaker: Eric R. Motto – Mitsubishi Electric US Inc.

2:30 PM – 6:00 PM ET

S08 - Modeling, Measurement and Suppression of Conductive, Near-Field and Radiated Electromagnetic Interference in Power Electronics Systems
Location: W109

Speaker: Shuo Wang – University of Florida

2:30 PM – 6:00 PM ET

S09 - Common Mistakes in Power Supply Designs
Location: W102

Speaker: Sheng-Yang Yu, PhD – Texas Instruments, Inc.

Speaker: Fei Yang – Texas Instruments

Speaker: Brian King – Texas Instruments

Speaker: Pradeep Shenoy, PhD – Texas Instruments, Inc.

2:30 PM – 6:00 PM ET

S10 - Silicon Is Still Here: A Refresher on the Narrow Band Gap Power MOSFETs
Location: W103

Speaker: Sanjay Havanur – Vishay Siliconix

Speaker: David Grey – Vishay Siliconix

2:30 PM – 6:00 PM ET

S11 - Silicon Carbide Power semiconductors: Characterization, Modelling and Advanced Gate Drivers
Location: W104

Speaker: Dimosthenis Peftitsis – Norwegian University of Science and Technology (NTNU)

Speaker: Daniel Alexander Philipps – Norwegian University of Science and Technology (NTNU)

2:30 PM – 6:00 PM ET

S12 - How Power Integrity Is Changing the World of Power Electronics
Location: W105

Speaker: Heidi Barnes – Keysight Technologies

Speaker: Steve Sandler – Picotest

Speaker: Benjamin Dannan – Signal Edge Solutions

7:00 AM – 1:30 PM ET

Speaker Ready Room Open Monday
Location: W107

Speaker: APEC 2023

7:00 AM – 7:00 PM ET

Registration Open Monday
Location: West A Lobby

Speaker: APEC 2023

8:30 AM – 10:00 AM ET

PELS TC 9: Wireless Power Transfer Systems
Location: Rosen Centre Salon 18

9:00 AM – 11:00 AM ET

PELS - The International Technology Roadmap for Wide Bandgap Power Semiconductors (ITRW)
Location: Rosen Centre Salon 16

9:00 AM – 12:00 PM ET

PELS VP of Membership Meeting
Location: Rosen Centre Salon 15

10:00 AM – 11:00 AM ET

PELS History Committee Meeting
Location: Rosen Centre Salon 18

11:00 AM – 12:00 PM ET

PELS Long Rang Planning Meeting
Location: Rosen Centre Salon 17

11:00 AM – 12:00 PM ET

PELS TC 12: Energy Access and Off-Grid Systems
Location: Rosen Centre Salon 16

11:30 AM – 1:00 PM ET

PELS TC3: Electrical Machines, Drives and Automation
Location: Rosen Centre Salon 18

12:00 PM – 1:00 PM ET

PELS Chapter Chair Forum/Luncheon
Location: Rosen Centre Salon 15

12:00 PM – 1:15 PM ET

Lunch on Own Monday

Speaker: APEC 2023

1:15 PM – 1:30 PM ET

Plenary - Opening Welcome by General Chair (Pradeep Shenoy)
Location: HALL WA3

1:30 PM – 2:00 PM ET

Plenary 1 - Recycling, Refining, and Remanufacturing Battery Materials
Location: Hall WA3

Speaker: Patrick Chapman – Redwood Materials

2:00 PM – 2:30 PM ET

Plenary 2 - Developing the Tools of Tomorrow: Efficient and Effective Power Electronics for Power Tools
Location: Hall WA3

Speaker: Brandon Verbrugge – Milwaukee Tools

2:30 PM – 3:00 PM ET

Plenary 3 - Designing for Manufacturability with Software-Based Constraints: Shortening the Iterative Design Cycle
Location: Hall WA3

Speaker: Grant Pitel – Magna-Power Electronics

3:00 PM – 3:30 PM ET

Plenary - Break
Location: HALL WA3

3:30 PM – 4:00 PM ET

Plenary 4 - GaN for EV Power Train: Breakthroughs and Challenges
Location: Hall WA3

Speaker: Tamara Baksht – VisIC Technologies

4:00 PM – 4:30 PM ET

Plenary 5 - Silicon Carbide Mass Commercialization and Future Trends`
Location: Hall WA3

Speaker: Victor Veliadis – Power America

4:30 PM – 5:00 PM ET

Plenary 6 - Developing the Power Electronics Workforce Through MOOC Degree Programs and Public Educational Videos
Location: Hall WA3

Speaker: Robert W. Erickson – Department of Electrical, Computer, and Energy Engineering, University of Colorado Boulder

Speaker: Katherine A. Kim – National Taiwan University

5:00 PM – 8:00 PM ET

Welcome Reception
Location: Expo Hall

Speaker: APEC 2023

7:30 PM – 9:30 PM ET

FIRST Robotics
Location: Expo Hall

Speaker: APEC 2023

7:30 PM – 9:30 PM ET

Micromouse Competition
Location: Expo Hall

Speaker: APEC 2023

8:30 AM – 12:00 PM ET

S13 - The Essence of Solid-State Transformers: Fundamentals, Design Challenges, R&D Overview, Comparative Evaluation, Outlook
Location: W109

Speaker: Jonas Huber, PhD – ETH Zurich

Speaker: Johann W. Kolar, PhD – ETH Zurich

8:30 AM – 12:00 PM ET

S14 - Improving EMC Performance for Switch-Mode Power Converters
Location: W101

Speaker: Michael Schutten – General Electric Global Research

8:30 AM – 12:00 PM ET

S15 - PMBus™: What, How and Why
Location: W102

Speaker: Peter Miller – Texas Instruments

8:30 AM – 12:00 PM ET

S16 - Is SiC High Performance Technology Reliable Enough for Your Application?
Location: W103

Speaker: Xuning Zhang, PhD – Microchip Technology Inc., USA

Speaker: Cesare Bocchiola – Microchip Technology Inc., Italy

8:30 AM – 12:00 PM ET

S17 - Design & Integration of Solid-State Circuit Protection
Location: W104

Speaker: Douglas C. Hopkins, PhD – North Carolina State University

Speaker: Sourish Sinha – NC State University

8:30 AM – 12:00 PM ET

S18 - Three-Level Neutral-Point-Clamped Converters: State-of-the-Art and Recent Advances in Control Solutions and Reliability
Location: W105

Speaker: Mateja Novak – Aalborg University

Speaker: Ariya Sangwongwanich – Aalborg University

Speaker: Frede Blaabjerg – Aalborg University

7:00 AM – 5:00 PM ET

Speaker Ready Room Open Tuesday
Location: W107

Speaker: APEC 2023

8:00 AM – 9:30 AM ET

PELS & CPSS Meeting
Location: Rosen Centre Salon 15

8:00 AM – 9:30 AM ET

PELS TC7: Critical Power and Energy Storage Systems
Location: Rosen Centre Salon 16

8:00 AM – 10:00 AM ET

Spouse / Guest Breakfast
Location: Salon 20/21 (Rosen Centre)

Speaker: APEC 2023

8:00 AM – 3:00 PM ET

Registration Open Tuesday
Location: West A Lobby

Speaker: APEC 2023

8:30 AM – 11:55 AM ET

IS01 - Core Loss Measurements for Different Materials and Excitations
Location: W203ABC

Industry Session Chair: Ed Herbert – PSMA

Industry Session Chair: George Slama – Würth Elektronik

8:31 AM – 8:55 AM ET

IS01.1 - Core loss mechanism in different soft magnetic materials
Location: W203ABC

Industry Session Presenter: Ranajit Sai

Core Loss Measurements for Different Materials and Excitations

8:55 AM – 9:20 AM ET

IS01.2 - Core loss measurement techniques to address impact of signal and frequency ranges
Location: W203ABC

Industry Session Presenter: Mike Ranjram – Arizona State University

Industry Session Presenter: Alex Hanson – UT Austin

Core Loss Measurements for Different Materials and Excitations

9:20 AM – 9:45 AM ET

IS01.3 - Core specifications vs. component specifications
Location: W203ABC

Industry Session Presenter: Bharadwaj Andapally – CBMM

Industry Session Presenter: Mark Nations – North Carolina State University

Core Loss Measurements for Different Materials and Excitations

9:45 AM – 10:10 AM ET

IS01.4 - Practical core loss measurements across different materials
Location: W203ABC

Industry Session Presenter: Dominic Heye – Dexter Magnetic Technologies

Core Loss Measurements for Different Materials and Excitations

10:40 AM – 11:05 AM ET

IS01.5 - Core loss measurements across power levels, frequencies and materials
Location: W203ABC

Industry Session Presenter: John Noble – Mag Inc

Core Loss Measurements for Different Materials and Excitations

11:05 AM – 11:30 AM ET

IS01.6 - Power loss measurements with non-sinusoidal waveforms
Location: W203ABC

Industry Session Presenter: Mike IG Wens, PhD – MinDCet NV

Core Loss Measurements for Different Materials and Excitations

11:30 AM – 11:55 AM ET

IS01.7 - Validating quality and verification of core loss measurements for databases
Location: W203ABC

Industry Session Presenter: Haoran Li – Princeton University

Core Loss Measurements for Different Materials and Excitations

8:30 AM – 11:55 AM ET

IS02 - Solutions for Data Center and Server Power
Location: W206

Industry Session Chair: Harry Soin – AEI

Industry Session Chair: Richard Chung – ST Microelectronics

8:30 AM – 8:55 AM ET

IS02.1 - Key Features of Next Generation 48 V Power and BBU Shelves Used in Datacenters
Location: W206

Industry Session Presenter: Harry Soin – AEI

Solutions for Data Center and Server Power

8:55 AM – 9:20 AM ET

IS02.2 - Using a Microcontroller-Based Hybrid Hysteretic Control (HHC) of an LLC Converter to Solve Transient Response Challenges in Server PSU Applications
Location: W206

Industry Session Presenter: Chen Jiang – Texas Instruments

Solutions for Data Center and Server Power

9:20 AM – 9:45 AM ET

IS02.3 - Design of a Compact Auxiliary Power Supply Using GaN for Server Applications
Location: W206

Industry Session Presenter: Brian King – Texas Instruments

Solutions for Data Center and Server Power

9:45 AM – 10:10 AM ET

IS02.4 - Data Center VR Power Delivery Solutions
Location: W206

Industry Session Presenter: Indumini Ranmuthu – Texas Instruments Inc.

Solutions for Data Center and Server Power

11:05 AM – 11:30 AM ET

IS02.6 - Immersion-Cooling Power Supply Unit for Data Center
Location: W206

Industry Session Presenter: Cai Youzhun – Delta electronic Shanghai Inc. Hangzhou Design Center

Solutions for Data Center and Server Power

11:30 AM – 11:55 AM ET

IS02.7 - Tips and Tricks to Improve the Density and Performance of a Data Center PSU
Location: W206

Industry Session Presenter: Yifei Zheng – Infineon Technologies

Solutions for Data Center and Server Power

8:30 AM – 11:55 AM ET

IS03 - Modern Power Semiconductor Technology Ambitions & Applications
Location: W204ABC

Industry Session Chair: Sandeep Bahl, PhD – Texas Instruments

Industry Session Chair: Renee Yawger – Efficient Power Conversion Corporation (EPC)

8:30 AM – 8:55 AM ET

IS03.1 - High-Power 650-V and 1200-V GaN Devices for EVs Applications
Location: W204ABC

Industry Session Presenter: Davide Bisi, PhD – Transphorm Inc.

Modern Power Semiconductor Technology Ambitions & Applications

8:55 AM – 9:20 AM ET

IS03.2 - Impact of SiC Power Devices on Emerging Applications and Mainstream Trends
Location: W204ABC

Industry Session Presenter: Peter Friedrichs, PhD – Infineon Technologies AG

Modern Power Semiconductor Technology Ambitions & Applications

9:20 AM – 9:45 AM ET

IS03.3 - Using Test to Fail Methodology to Accurately Predict How Enhancement Mode GaN Devices Can Last More than 25 Years in Solar Applications
Location: W204ABC

Industry Session Presenter: Shengke Zhang – Efficient Power Conversion

Modern Power Semiconductor Technology Ambitions & Applications

9:45 AM – 10:10 AM ET

IS03.4 - Microchip SiC-Based Auxiliary E-Fuse Overview
Location: W204ABC

Industry Session Presenter: Ehab Tarmoom – Microchip

Modern Power Semiconductor Technology Ambitions & Applications

10:40 AM – 11:05 AM ET

IS03.5 - Performance Analysis and Cost Comparison of High-Efficiency Power Factor Correction Topologies for High Power AC/DC Converters
Location: W204ABC

Industry Session Presenter: Chi Xu – Texas Instruments

Modern Power Semiconductor Technology Ambitions & Applications

11:05 AM – 11:30 AM ET

IS03.6 - An Overview of GaN Dynamic Rds(ON) and Quantifying Performance considerations in Applications
Location: W204ABC

Industry Session Presenter: Daniel Popa

Modern Power Semiconductor Technology Ambitions & Applications

11:30 AM – 11:55 AM ET

IS03.7 - High Performance GaN Switches for LV and HV Applications on Cost-optimized 8-inch GaN-on-Si Technology Platforms
Location: W204ABC

Industry Session Presenter: Denis Marcon, PhD – Innoscience

Modern Power Semiconductor Technology Ambitions & Applications

8:30 AM – 11:55 AM ET

IS04 - Wireless Power Industry Showcase
Location: W205A

Industry Session Chair: Sanjay Gupta – AirFuel Alliance

Industry Session Chair: Trish Thomas – AirFuel Alliance

8:30 AM – 8:55 AM ET

IS04.1 - How GaN is Advancing Wireless Power Technology
Location: W205A

Industry Session Presenter: Paul Wiener – GaN Systems

Wireless Power Industry Showcase

8:55 AM – 9:20 AM ET

IS04.2 - Wireless Power for Automotive Applications
Location: W205A

Industry Session Presenter: Josh Yank – Yank Technologies

Wireless Power Industry Showcase

9:20 AM – 9:45 AM ET

IS04.3 - Magically Convenient Wireless EV Charging
Location: W205A

Industry Session Presenter: Milisav Danilovic, PhD – WiTricity

Wireless Power Industry Showcase

9:45 AM – 10:10 AM ET

IS04.4 - Charging the Future of IoT
Location: W205A

Industry Session Presenter: Cesar Johnston – Energous

Wireless Power Industry Showcase

10:40 AM – 11:05 AM ET

IS04.5 - Energy Harvesting is the Future of IoT
Location: W205A

Industry Session Presenter: Nick Dutton – Atmosic

Wireless Power Industry Showcase

11:05 AM – 11:30 AM ET

IS04.6 - Ambient IoT – The Path to Connecting Trillions of Things
Location: W205A

Industry Session Presenter: Steve Statler – Wiliot / Bluetooth SiG

Wireless Power Industry Showcase

11:30 AM – 11:55 AM ET

IS04.7 - The Future of Wireless Power
Location: W205A

Industry Session Presenter: Sanjay Gupta – AirFuel Alliance

Wireless Power Industry Showcase

8:30 AM – 11:55 AM ET

IS05 - Power Innovations and Technologies Enabling Smart Buildings and Cities
Location: W205BC

Industry Session Chair: David Chen, SM – Power Integrations

Industry Session Chair: Lincoln Xue – Oak Ridge National Lab

8:30 AM – 8:55 AM ET

IS05.1 - Reimagine Architecture, Functionality, and Sustainability of Power Technology for Smart Buildings and Cities
Location: W205BC

Industry Session Presenter: Lincoln Xue – Oak Ridge National Lab

Power Innovations and Technologies Enabling Smart Buildings and Cities

8:55 AM – 9:20 AM ET

IS05.2 - Fault Analysis and Predictive Maintenance for BLDC motors
Location: W205BC

Industry Session Presenter: John Emmanuel Tan – Power Integrations

Power Innovations and Technologies Enabling Smart Buildings and Cities

9:20 AM – 9:45 AM ET

IS05.3 - Micro-power Energy Harvesting for Retrofitted Wireless Sensors in Buildings
Location: W205BC

Industry Session Presenter: Mike Hayes, MEngSc – Tyndall National Institute

Power Innovations and Technologies Enabling Smart Buildings and Cities

9:45 AM – 10:10 AM ET

IS05.4 - Powering Future Indoor Farming Facilities
Location: W205BC

Industry Session Presenter: Frank Cirolia – Advanced Energy

Power Innovations and Technologies Enabling Smart Buildings and Cities

10:40 AM – 11:05 AM ET

IS05.5 - Bidirectional Wireless Power Transfer System Design and Integration for Medium-Duty Electric Vehicles
Location: W205BC

Industry Session Presenter: Omer C. Onar – Oak Ridge National Laboratory

Power Innovations and Technologies Enabling Smart Buildings and Cities

11:05 AM – 11:30 AM ET

IS05.6 - Meeting Carbon Goals with GaN
Location: W205BC

Industry Session Presenter: Giorgia Longobardi, PhD – Cambridge GaN Devices

Power Innovations and Technologies Enabling Smart Buildings and Cities

11:30 AM – 11:55 AM ET

IS05.7 - Grid-interactive Modeling and Community-scale Energy Planning
Location: W205BC

Industry Session Presenter: Ben Polly – National Renewable Energy Laboratory

Power Innovations and Technologies Enabling Smart Buildings and Cities

8:30 AM – 11:55 AM ET

IS06 - Other Perspectives of Power Electronics - Markets, Society and Policies
Location: W202BC

Industry Session Chair: Stephen Oliver, MBA – Navitas Semiconductor

Industry Session Chair: Elena Barbarini – System Plus Consulting

8:30 AM – 8:55 AM ET

IS06.1 - How to Protect Your Valuable Intellectual Property (IP)
Location: W202BC

Industry Session Presenter: Brian Rosenbloom – Rothwell Figg

Other Perspectives of Power Electronics - Markets, Society and Policies

8:55 AM – 9:20 AM ET

IS06.2 - EV Powertrain Trends - Now and in the Future
Location: W202BC

Industry Session Presenter: Milan Rosina – Yole Intelligence

Other Perspectives of Power Electronics - Markets, Society and Policies

9:20 AM – 9:45 AM ET

IS06.3 - State of the Art of SiC Transistors and Modules: Technology and Cost Overview
Location: W202BC

Industry Session Presenter: Elena Barbarini – System Plus Consulting

Other Perspectives of Power Electronics - Markets, Society and Policies

9:45 AM – 10:10 AM ET

IS06.4 - The Past, Present, and Future of Current Sensing
Location: W202BC

Industry Session Presenter: John Stevens – NAVITAS SEMICONDUCTOR

Other Perspectives of Power Electronics - Markets, Society and Policies

10:40 AM – 11:05 AM ET

IS06.5 - Sustainability Benefits of GaNFast Power ICs
Location: W202BC

Industry Session Presenter: Anthony Schiro – Navitas Semiconductor

Other Perspectives of Power Electronics - Markets, Society and Policies

11:05 AM – 11:30 AM ET

IS06.6 - How Do Vehicle System Level Considerations Affect Power Electronic Technology Choices and Market
Location: W202BC

Industry Session Presenter: Adam Dawson – Exawatt

Other Perspectives of Power Electronics - Markets, Society and Policies

11:30 AM – 11:55 AM ET

IS06.7 - Power Electronics Role in Future Hydrogen Systems
Location: W202BC

Industry Session Presenter: Ahmed Abdelhakim – ABB

Other Perspectives of Power Electronics - Markets, Society and Policies

8:30 AM – 12:00 PM ET

T01 - DC-DC Converter Applications
Location: W109A

Technical Lecture Session Chair: Xin Zhang, PhD – IBM

Technical Lecture Session Chair: Kang Wei – Texas Instruments

8:30 AM – 8:50 AM ET

T01.1 - A Novel Digital Energy Management Control Strategy of a Fully Active Hybrid Converter for Unmanned Aerial Vehicle Applications
Location: W109A

Technical Lecture Presenter: Xueshen Zhang, Ph. D student – University of Rhode Island

Hard- and Soft-Switched

8:50 AM – 9:10 AM ET

T01.2 - A Converter Based Switching Loss Measurement Method for WBG Device
Location: W109A

Technical Lecture Presenter: Qiuzhe Yang – Virginia Tech

Hard- and Soft-Switched

9:10 AM – 9:30 AM ET

T01.3 - ZVS Clamp-Switch Quasi Z-Source DC/DC Boost Converters
Location: W109A

Technical Lecture Presenter: Burkhard Ulrich – Reutlingen University

Hard- and Soft-Switched

9:30 AM – 9:50 AM ET

T01.4 - Coupled Inductor Based Non-Isolated High Conversion Ratio Boost Extender
Location: W109A

Technical Lecture Presenter: Vikas Kumar Rathore – Ben-Gurion University of the Negev

Hard- and Soft-Switched

9:50 AM – 10:10 AM ET

T01.5 - Design and Implementation of a Multiport System for Solar EV Applications
Location: W109A

Technical Lecture Presenter: Reza Rezaii – University of Central Florida

Bidirectional dc/dc converters

10:40 AM – 11:00 AM ET

T01.6 - Wide Output Range High Efficiency MHz DC/DC for PD3.1 Charger
Location: W109A

Technical Lecture Presenter: Gao Fan – silergy

Hard- and Soft-Switched

11:00 AM – 11:20 AM ET

T01.7 - A 40W Dual-Inductor Hybrid Converter with Flying-Capacitor-Tapped Auxiliary Stage for Fast Transient Response in 48V PoL Automotive Applications
Location: W109A

Technical Lecture Presenter: Nameer Ahmed Khan – University of Toronto

Point-of-Load (PoL) and Multi-Phase Converters

11:20 AM – 11:40 AM ET

T01.8 - A Power Boost Technique for the Isolated Modular Multilevel DC-DC Converter Based on Sub-Module Capacitor Voltages Ripple
Location: W109A

Technical Lecture Presenter: Shiyuan Yin – Georgia Institute of Technology

Bidirectional dc/dc converters

8:30 AM – 12:00 PM ET

T02 - Modeling & Design of Power Converters
Location: W101

Technical Lecture Session Chair: Satarupa Bal – Eaton

Technical Lecture Session Chair: Suman Debnath – Oak Ridge National Laboratory

8:30 AM – 8:50 AM ET

T02.1 - Modeling and Validation of Common-Mode Emissions of SiC MOSFET-Based Voltage Source Inverter Motor Drive
Location: W101

Technical Lecture Presenter: Tianchen Li – University of Wisconsin-Milwaukee

Circuits and Systems

8:50 AM – 9:10 AM ET

T02.2 - Simple Radiated Noise Estimation Based on Datasets of SiC and Si IPMs for Inverter Use
Location: W101

Technical Lecture Presenter: Toshiya Tadakuma, Dr.Eng. – Mitsubishi Electric Corporation

Rapid Prototyping

9:10 AM – 9:30 AM ET

T02.3 - Frequency Response Characterization of High-Bandwidth Current Viewing Resistors Used in Dynamic Testing of Power Semiconductors
Location: W101

Technical Lecture Presenter: Sergio Jimenez – The University of Alabama

Device and Component Modeling

9:30 AM – 9:50 AM ET

T02.4 - Inductance and Parasitic Capacitance Modeling of Spiral Air-Core Inductor in MHz Inductive Power Transfer System
Location: W101

Technical Lecture Presenter: Jiasheng Huang – Technical University of Denmark

Parasitics

9:50 AM – 10:10 AM ET

T02.5 - Loss Estimation and Design of DC-DC Converters Using Physics- and Data-Based Component Models
Location: W101

Technical Lecture Presenter: Skye Reese – University of Colorado Boulder

Circuits and Systems

10:40 AM – 11:00 AM ET

T02.6 - Analytical Modelling of SiC MOSFET Based on Datasheet Parameters Considering the Dynamic Transfer Characteristics and Channel Resistance Dependency on the Drain Voltage
Location: W101

Technical Lecture Presenter: Hemanth Betha – University of Sheffield

Device and Component Modeling

11:00 AM – 11:20 AM ET

T02.7 - Modeling Non-Linearities of Power Electronic Converters Using Artificial Neural Networks
Location: W101

Technical Lecture Presenter: Andrea Zilio – University Of Padova

Circuits and Systems

11:20 AM – 11:40 AM ET

T02.8 - Novel Gerber File-Based Numerical Modeling and Simulation for Thermal Analysis of Printed Circuit Boards
Location: W101

Technical Lecture Presenter: Paul Ziegenfelder – Utah State University

Software Tools

11:40 AM – 12:00 PM ET

T02.9 - An Empirical Capacity Estimation Model for Lithium-Ion Battery Cells Using Surface Temperature and Terminal Voltage Measurements
Location: W101

Technical Lecture Presenter: Ala Hussein – University of Central Florida

Device and Component Modeling

8:30 AM – 12:00 PM ET

T03 - Power Electronic Converters for Renewable Energy System Applications
Location: W102

Technical Lecture Session Chair: Qingxuan Ma – GaN Systems

Technical Lecture Session Chair: Weiqiang Chen – ABB

8:30 AM – 8:50 AM ET

T03.1 - A Novel Transformerless Single-Phase Three-Level Buck-Boost Inverter
Location: W102

Technical Lecture Presenter: Eyyup Demirkutlu – ASELSAN

Photovoltaic (PV) Inverters and Micro Inverters

8:50 AM – 9:10 AM ET

T03.2 - Circulating Current Reduction of Back-to-Back MMC with Advanced Grid-Support Functionalities for Medium-Voltage Applications
Location: W102

Technical Lecture Presenter: Sara Yzdn – Mathworks

Grid-Tied Systems

9:10 AM – 9:30 AM ET

T03.3 - A Line-Frequency Transformer-Less High Frequency Medium Voltage PV Grid Connected Inverter with Extended High Voltage Gain Range
Location: W102

Technical Lecture Presenter: Mehdi Abbasi – York University

Photovoltaic (PV) Inverters and Micro Inverters

9:30 AM – 9:50 AM ET

T03.4 - A Three-Port Non-Isolated High Voltage Conversion Ratio DC-DC Converter for MPPT Extraction of Photovoltaic Systems
Location: W102

Technical Lecture Presenter: Pedram Chavoshipour Heris – University of Arkansas

Maximum power point tracking (MPPT)

9:50 AM – 10:10 AM ET

T03.5 - Active Power Filter Capability of a 10 kV SiC MOSFET-Based Asynchronous Microgrid Power Conditioning System
Location: W102

Technical Lecture Presenter: Dingrui Li – The University of Tennessee

Microgrid Systems

10:40 AM – 11:00 AM ET

T03.6 - A Novel Beat Frequency Modulated Single-Stage Soft-Switched Microinverter
Location: W102

Technical Lecture Presenter: Milad Heidari Khouzani – University of Alberta

Photovoltaic (PV) Inverters and Micro Inverters

11:00 AM – 11:20 AM ET

T03.7 - A GaN Variable-Frequency Series Resonant Dual-Active-Bridge Bidirectional AC-DC Converter for Battery Energy Storage System
Location: W102

Technical Lecture Presenter: Huanghaohe Zou – The University of Texas at Austin

Bi-directional Power Converters

11:20 AM – 11:40 AM ET

T03.8 - Design and Testing of a 13.8 kV/ 1.1MVA 3-Phase 5-Level Flying Capacitor Converter with 10 kV SiC MOSFETs
Location: W102

Technical Lecture Presenter: Xiang Lin – Virginia Polytechnic Institute and State University

Grid-Tied Systems

11:40 AM – 12:00 PM ET

T03.9 - A Single-Stage Isolated Bi-Directional Micro-Inverter Building Block for Off-Grid Energy Access
Location: W102

Technical Lecture Presenter: Ruomu Hao – Georgia Institute of Technology

Photovoltaic (PV) Inverters and Micro Inverters

8:30 AM – 12:00 PM ET

T04 - SiC Power Devices
Location: W103

Technical Lecture Session Chair: Fei Yang – Texas Instruments

Technical Lecture Session Chair: Fang Luo – Stony Brook University

8:30 AM – 8:50 AM ET

T04.1 - Comparison of SiC MOSFET Thermal Performance Under Different PWM Strategies
Location: W103

Technical Lecture Presenter: Yu Zou – Saginaw Valley State Univ.

SiC MOSFETs and BJTs

8:50 AM – 9:10 AM ET

T04.2 - ClampDRIVE: An Improved Technique for SiC Cascode FET Switching Behavior Control
Location: W103

Technical Lecture Presenter: Xueqing Larry Li – United Silicon Carbide, Inc Qorvo

SiC MOSFETs and BJTs

9:10 AM – 9:30 AM ET

T04.3 - 10 kV SiC Thyristor for High Voltage Pulsed Power Generators
Location: W103

Technical Lecture Presenter: Koji Nakayama – National Institute of Advanced Industrial Science and Technology

SiC MOSFETs and BJTs

9:30 AM – 9:50 AM ET

T04.4 - Using a Digital Gate Driver to Improve the Performance of Silicon Carbide MOSFETs
Location: W103

Technical Lecture Presenter: Vipin Gaonkar – Microchip Technology (India) Private Limited

SiC MOSFETs and BJTs

9:50 AM – 10:10 AM ET

T04.5 - A Self-Powered Bidirectional DC Solid-State Circuit Breaker Based on SiC JFETs
Location: W103

Technical Lecture Presenter: Daixin Chen – Hunan University

SiC MOSFETs and BJTs

10:40 AM – 11:00 AM ET

T04.6 - Impact of Diode Characteristics on 1.2 kV SiC MOSFET and Cascode JFET Efficiency: Body Diodes Vs SiC Schottky Barrier Diodes
Location: W103

Technical Lecture Presenter: Mohammed Amer Karout – University of Warwick

SiC MOSFETs and BJTs

11:00 AM – 11:20 AM ET

T04.7 - Analysis and Characterization of Four-Quadrant Switches Based Commutation Cell
Location: W103

Technical Lecture Presenter: Ramandeep Narwal – North Carolina State University

SiC MOSFETs and BJTs

11:20 AM – 11:40 AM ET

T04.8 - Design Considerations for Series-Connected SiC MOSFETs Operating at 100 kV/µs
Location: W103

Technical Lecture Presenter: Tobias Nieckula Ubostad – Norwegian University of Science and Technology

SiC MOSFETs and BJTs

8:30 AM – 12:00 PM ET

T05 - Multilevel Inverter & Modulation Techniques
Location: W109B

Technical Lecture Session Chair: Ali Safayet – Halla Mechatronics

Technical Lecture Session Chair: Woongkul Lee – Michigan State University

8:30 AM – 8:50 AM ET

T05.1 - A Segmented Electric Aircraft Drivetrain Employing 10-Level Flying Capacitor Multi-Level Dual-Interleaved Power Modules
Location: W109B

Technical Lecture Presenter: Roderick Bayliss III – University of California, Berkeley

High Performance Drives

8:50 AM – 9:10 AM ET

T05.2 - An Enhanced PWM Scheme of Three-Level T-Type Inverter for Loss Balance and Reduction
Location: W109B

Technical Lecture Presenter: Xingchen Zhao – Virginia Polytechnic Institute and State University Center for Power Electronics (CPES)

Single- and Multi-Phase Inverters

9:10 AM – 9:30 AM ET

T05.3 - Comprehensive Electromagnetic Interference Analysis of Neutral-Point-Less (NPL) Multilevel Inverter with Active Common-Mode Voltage Cancellation
Location: W109B

Technical Lecture Presenter: Kangbeen Lee – Michigan State University

High Performance Drives

9:30 AM – 9:50 AM ET

T05.4 - Voltage Balancing of a New Five-Level Multilevel Inverter with a Modified Carrier Pulse Width Modulation Scheme
Location: W109B

Technical Lecture Presenter: Mohan Ram Selvaraj – Lakehead University

Single- and Multi-Phase Inverters

9:50 AM – 10:10 AM ET

T05.5 - A Novel One-Dimension Space Vector Strategy for Multilevel Cascaded Inverters
Location: W109B

Technical Lecture Presenter: Jiale Zhou – University of North Carolina at Charlotte

Single- and Multi-Phase Inverters

10:40 AM – 11:00 AM ET

T05.6 - Four Legs Clamping Modulation Technique of Dual Inverter with Isolated DC Bus for Reduction of Switching Loss Considering Power Factor
Location: W109B

Technical Lecture Presenter: Tae-Hyeong Kim – Dankook University

Single- and Multi-Phase Inverters

11:00 AM – 11:20 AM ET

T05.7 - LLC Resonant Converter Based Single-Stage Inverter with Multi-Resonant Branches Using Variable Frequency Modulation
Location: W109B

Technical Lecture Presenter: Dong Jiao – Virginia Polytechnic Institute and State University

Single- and Multi-Phase Inverters

11:20 AM – 11:40 AM ET

T05.8 - Analytical Device Currents Formulation for a Space-Vector Modulated Voltage Source Inverter with Dead-Time Consideration
Location: W109B

Technical Lecture Presenter: Kaushik Mirdoddi – Indian Institute of Technology Delhi

Single- and Multi-Phase Inverters

8:30 AM – 12:00 PM ET

T06 - Gate Drive Circuits
Location: W104

Technical Lecture Session Chair: Davide Giacomini – Infineon Technologies AG

Technical Lecture Session Chair: Ilknur Colak – Schneider Electric

8:30 AM – 8:50 AM ET

T06.1 - Active Clamp Circuit for Online ON-State Voltage Measurement of High Voltage SiC MOSFETs Power Module
Location: W104

Technical Lecture Presenter: Antoine Laspeyres – Nantes Université CNRS IETR UMR 6164 F-44000 Nantes

Gate Drive Circuits

8:50 AM – 9:10 AM ET

T06.2 - A Gate Driver IC for GaN-Based Synchronous Buck Converter with a Double-Sided Adaptive Dead-Time Generator
Location: W104

Technical Lecture Presenter: Giao Huu Thuc – Department of Electrical Engineering National Taiwan University

Gate Drive Circuits

9:10 AM – 9:30 AM ET

T06.3 - A Novel Series-Parallel Design of the 3.6kV/400A SiC Austin SuperMOS
Location: W104

Technical Lecture Presenter: Liqi Zhang – UT AUSTIN

Gate Drive Circuits

9:30 AM – 9:50 AM ET

T06.4 - Gate Driver Chip-Set Using Low Volt-Second Pulse Transformer for Galvanic Signal Isolation
Location: W104

Technical Lecture Presenter: Brendan O’Sullivan – Tyndall National Institute, University College Cork

Gate Drive Circuits

9:50 AM – 10:10 AM ET

T06.5 - Partial Discharge Characterization of Solid-Dielectric-Based Transformer Under High Frequency High dv/dt PWM Voltage for MV Applications
Location: W104

Technical Lecture Presenter: Zhehui Guo – Center for Advanced Power Systems Florida State University

Gate Drive Circuits

10:40 AM – 11:00 AM ET

T06.6 - Design of High Isolation and Compact Gate Driver for 6.5 kV IGBT Module in Medium Voltage Converters
Location: W104

Technical Lecture Presenter: Yihui Zhang – Chongqing University

Gate Drive Circuits

11:00 AM – 11:20 AM ET

T06.7 - A Build-In Gate Driver Design for 1.7kV SiC MOSFET Module with 32-Chip Paralleled
Location: W104

Technical Lecture Presenter: Liyang Du – University of Arkansas

Gate Drive Circuits

11:20 AM – 11:40 AM ET

T06.8 - Intelligent Gate Drive for Cryogenic Solid-State Circuit Breaker with Current Limitation Capability for Aviation Application
Location: W104

Technical Lecture Presenter: Dehao Qin – Clemson University

Gate Drive Circuits

11:40 AM – 12:00 PM ET

T06.9 - Dynamic Gate Drive for SiC Power MOSFETs with Sub-Nanosecond Timings
Location: W104

Technical Lecture Presenter: Rophina Li – University of Toronto

Gate Drive Circuits

8:30 AM – 12:00 PM ET

T07 - Design Techniques for SiC Power Modules
Location: W105

Technical Lecture Session Chair: Qing Ye – Texas Instruments

Technical Lecture Session Chair: Dorai Yelaverthi – Utah State University

8:30 AM – 8:50 AM ET

T07.1 - Design, Fabrication and Testing of 3.3 kV/200A SiC Half-Bridge Power Module
Location: W105

Technical Lecture Presenter: Yang Li – Stony Brook University

Power Electronics Packaging

8:50 AM – 9:10 AM ET

T07.2 - 10 kV SiC MOSFET Power Module with Double-Sided Jet-Impingement Cooling
Location: W105

Technical Lecture Presenter: Mark Cairnie – Virginia Tech

Power Modules / High Density Design

9:10 AM – 9:30 AM ET

T07.3 - A 10 kV SiC Power Module Stacked Substrate Design with Patterned Middle-Layer for Partial Discharge Reduction
Location: W105

Technical Lecture Presenter: Xiaoling Li, MA – Univerity of Arkansas

Power Modules / High Density Design

9:30 AM – 9:50 AM ET

T07.4 - Design Considerations of a 3.3 kV SiC-Based Reverse Voltage Blocking Module for Current Source Inverter Application
Location: W105

Technical Lecture Presenter: Sneha Narasimhan – NCSU

Power Modules / High Density Design

9:50 AM – 10:10 AM ET

T07.5 - Common Source Inductance Compensation Technique for Dynamic Current Balancing in SiC MOSFETs Parallel Operations
Location: W105

Technical Lecture Presenter: Boyi Zhang – Delta Electronics (Americas) Ltd.

Power Modules / High Density Design

10:40 AM – 11:00 AM ET

T07.6 - Fabrication and Experimental Validation of Low Inductance SiC Power Module with Integrated Microchannel Cooler
Location: W105

Technical Lecture Presenter: Hao Chen – University of Arkansas

Power Modules / High Density Design

11:00 AM – 11:20 AM ET

T07.7 - A Novel Integrated 1.2 kV Double-Sided Cooled Power Module
Location: W105

Technical Lecture Presenter: Riya Paul – University of Arkansas

Power Modules / High Density Design

11:20 AM – 11:40 AM ET

T07.8 - A Guideline for Silicon Carbide MOSFET Thermal Characterization Based on Source-Drain Voltage
Location: W105

Technical Lecture Presenter: Yi Zhang – Aalborg University

Thermal and EMC Management

11:40 AM – 12:00 PM ET

T07.9 - A Smart Silicon Carbide Power Module with Pulse Width Modulation Over Wi-Fi and Wireless Power Transfer-Enabled Gate Driver
Location: W105

Technical Lecture Presenter: Faisal Khan – National Renewable Energy Laboratory

Power Modules / High Density Design

8:30 AM – 12:00 PM ET

T08 - Magnetic Technology
Location: W108

Technical Lecture Session Chair: Matt Wilkowski – EnaChip

Technical Lecture Session Chair: Adam Skorek – University of Québec at Trois-Rivières

8:30 AM – 8:50 AM ET

T08.1 - Vertically Stacked Piezoelectric Transformer for High-Frequency Power Amplifier
Location: W108

Technical Lecture Presenter: Yuetao Hou – Cornell University

Advanced magnetic materials and geometries

8:50 AM – 9:10 AM ET

T08.2 - Origami Inductors: Foldable 3-D Polyhedron Air-Coupled Inductors for MHz Power Conversion
Location: W108

Technical Lecture Presenter: Tanuj Sen – Princeton University

Advanced magnetic materials and geometries

9:10 AM – 9:30 AM ET

T08.3 - Diamond-Window Resonant Inductor with Significant AC Flux
Location: W108

Technical Lecture Presenter: Cong Tu, PhDCandidate – Virginia Polytechnic Institute and State University

Advanced magnetic materials and geometries

9:30 AM – 9:50 AM ET

T08.4 - Extra Switching Losses Caused by Parasitic Capacitance in Medium-Voltage Filter Inductors with Grounded Cores
Location: W108

Technical Lecture Presenter: Hongbo Zhao – AAU Energy

Magnetics applications

9:50 AM – 10:10 AM ET

T08.5 - PCB Winding-Based Coupled Inductor for a High-Frequency DC/DC Converter with 99% Efficiency
Location: W108

Technical Lecture Presenter: Pranav Raj Prakash, MS – CPES, Virginia Tech

Magnetics applications

10:40 AM – 11:00 AM ET

T08.6 - Design and Comparison of FR4 and Flex PCB Transformers for High Frequency High Current, Low Profile Applications
Location: W108

Technical Lecture Presenter: Minh Ngo – Virginia Polytechnic Institute and State University

High-frequency magnetics

11:00 AM – 11:20 AM ET

T08.7 - A High Frequency Resonant Push-Pull Converter with a Single Integrated Magnetic Component
Location: W108

Technical Lecture Presenter: Nikolai Weitz – Friedrich-Alexander-Universität Erlangen-Nürnberg

High-frequency magnetics

11:20 AM – 11:40 AM ET

T08.8 - Transformer Structure of Bifilar Primary Winding with Advanced Common Mode Noise Attenuation Performance for Isolated DC-DC Converters
Location: W108

Technical Lecture Presenter: Qinghui Huang – University of Florida

High-frequency magnetics

11:40 AM – 12:00 PM ET

T08.9 - A High-Efficiency Modular Air-Cooling Method for PCB Winding with the Additive Manufacturing
Location: W108

Technical Lecture Presenter: Yizhi Ruan – Virginia Tech

Additive manufacturing

9:00 AM – 4:30 PM ET

Expo Hall Open - Tuesday
Location: Expo Hall

Speaker: APEC 2023

9:30 AM – 11:00 AM ET

PELS TC2: Power Components, Integration, and Power ICs
Location: Rosen Centre Salon 16

10:00 AM – 11:00 AM ET

PELS Digital Media Committee
Location: Rosen Centre Salon 17

10:00 AM – 11:30 AM ET

PELS TC1: Control and Modelling of Power Electronics
Location: Rosen Centre Salon 18

10:00 AM – 1:00 PM ET

PELS TC10: Design Methodologies
Location: Rosen Centre Salon 15

10:10 AM – 10:45 AM ET

Break 1 in Expo Hall
Location: Expo Hall

Speaker: APEC 2023

11:00 AM – 12:00 PM ET

PELS Day 2023 Committee Meeting
Location: Rosen Centre Salon 17

11:00 AM – 12:00 PM ET

WIE Committee Meeting
Location: Rosen Centre Salon 16

12:00 PM – 1:30 PM ET

Tuesday Lunch in Expo Hall
Location: Expo Hall

Speaker: APEC 2023

1:00 PM – 2:00 PM ET

PEDG Steering Committee Meeting
Location: Rosen Centre Salon 16

1:00 PM – 3:00 PM ET

PELS VP of Global Intersociety Relations Committee
Location: Rosen Centre Salon 18

1:30 PM – 2:00 PM ET

Battery Cell Testing with 24-bit Multi-functional Testers
Location: W202BC

Speaker: Erik Soiman – CAEN Technologies

1:30 PM – 2:00 PM ET

Enabling the future with Nexperia wide bandgap and high voltage technologies
Location: Expo Hall Theater #1

Speaker: Jim Honea – Nexperia

1:30 PM – 2:00 PM ET

High Efficiency Bidirectional Dual Active Bridge (DAB) for Battery Charging Applications
Location: Expo Hall Theater #2

Speaker: Giuseppe Aiello, PhD – STMicroelectronics

1:30 PM – 2:00 PM ET

ICeGaN™ 650V Power GaN ICs bring efficiency, robustness and reliability for high power applications to the next level
Location: W203ABC

Speaker: Giorgia Longobardi – Cambridge GaN Devices

1:30 PM – 2:00 PM ET

Soitec solutions, a must-have for EV and autonomous mobility applications?
Location: W205BC

Speaker: Alex Lim – Soitec

1:30 PM – 2:00 PM ET

TBD
Location: W205A

Speaker: PierreFrancois Allaire – OPAL-RT TECHNOLOGIES

1:30 PM – 2:00 PM ET

The $5B Inflection Point for Motor Drives
Location: W206

Speaker: Austin Curbow – Wolfspeed, Inc.

1:30 PM – 2:00 PM ET

TOLL4Tough™
Location: W103

Speaker: Steven Goldman – Alpha and Omega Semiconductor

1:30 PM – 2:00 PM ET

Using a High Bandwidth Loss Probe to measure SiC and GAN FETs losses with a lower bandwidth Oscilloscope.
Location: W204ABC

Speaker: Ken Henderson – Cleverscope

1:30 PM – 2:00 PM ET

Wafer level test & burn-in of silicon carbide and gallium nitride devices
Location: W102

Speaker: Vernon Rogers – Aehr Test Systems

1:30 PM – 3:30 PM ET

PELS TC6: Emerging Power Electronic Technologies
Location: Rosen Centre Salon 17

1:30 PM – 5:00 PM ET

Student Job Fair
Location: Hall WA3

Speaker: APEC 2023

2:00 PM – 3:00 PM ET

PELS TC4: Electrified Transportation Systems
Location: Rosen Centre Salon 15

2:00 PM – 3:30 PM ET

PELS TC5: Sustainable Energy Systems
Location: Rosen Centre Salon 16

2:15 PM – 2:45 PM ET

A new top side cooling is setting the future for SMD power FETs
Location: W204ABC

Speaker: Waqas Syed – Infineon Technologies

2:15 PM – 2:45 PM ET

Breakdown Voltage and Reinforced Isolation – How a Better Flyback Converter is Reshaping EV Architectures
Location: Expo Hall Theater #1

Speaker: Peter Vaughan – Power Integrations

2:15 PM – 2:45 PM ET

Combine Semikron Danfoss packaging excellence with SiC for EV charging and motor drives
Location: W203ABC

Speaker: Stefan Haeuser – Semikron Danfoss

2:15 PM – 2:45 PM ET

Energy Harvesting and the Nichicon LTO Battery
Location: W102

Speaker: Jesus Torres – Nichicon (America) Corp

2:15 PM – 2:45 PM ET

High Voltage Gate Driver Trends
Location: W103

Speaker: Namrata Pandya – NXP Semiconductors

2:15 PM – 2:45 PM ET

Pure-Play, High-Speed GaNFast and GeneSiC: The Leading Edge of Next-Gen Power Semiconductors
Location: W202BC

Speaker: Stephen Oliver, MBA – Navitas Semiconductor

2:15 PM – 2:45 PM ET

Putting Qorvo Intelligence Into a 20-cell Battery Pack with a Single-chip Solution
Location: Expo Hall Theater #2

Speaker: John Carpenter – Qorvo

2:15 PM – 2:45 PM ET

SIMPLIS AC Analysis of PFC Circuits Using New PFC POP Trigger
Location: W206

Speaker: Andrija Stupar – Simplis Technologies

2:15 PM – 2:45 PM ET

Surge Residual to Measure Surge Protection Effectiveness
Location: W205A

Speaker: Rich Barden – Lodestone Pacific

3:00 PM – 3:30 PM ET

Full-switching Electric Drive FPGA-based Hardware-in-the-Loop Simulation
Location: W102

Speaker: Steve Liu – Speedgoat

3:00 PM – 3:30 PM ET

Gate driver ICs are key system components to enable high efficiency and extreme power density in SMPS for Telecom, Data Center and Computing applications using the latest GaN and SiC power semiconductors..
Location: W204ABC

Speaker: Diogo Varajao – Infineon Technologies

3:00 PM – 3:30 PM ET

Measurement Principles for Optimizing your Power Electronics Design
Location: W205A

Speaker: Tom Neville – Rohde & Schwarz USA

3:00 PM – 3:30 PM ET

DC fuses and protection strategy for EES and EV charging infrastructure
Location: W205BC

Speaker: Jean-François De Palma – Mersen

3:00 PM – 3:30 PM ET

NBM7100 – an integrated power management solution for extending coin cell battery life in pulsed load IoT applications.
Location: Expo Hall Theater #1

Speaker: Zachary Cline – Nexperia

3:00 PM – 3:30 PM ET

Optimize Power Supply Design in Minutes - PowerEsim
Location: W203ABC

Speaker: Dr. Franki – PowerELab Limited

3:00 PM – 3:30 PM ET

Skyworks’s Power Products Arrive in Sunny Florida
Location: W206

Speaker: Rudye McGlothlin – Skyworks Solutions

3:00 PM – 3:30 PM ET

Tips for Efficient Testing in Wide Bandgap Semiconductors – Double Pulse & High Power Safety
Location: Expo Hall Theater #2

Speaker: Chris Loberg – Tektronix Inc.

3:00 PM – 4:00 PM ET

Break 2 in Expo Hall
Location: Expo Hall

Speaker: APEC 2023

3:30 PM – 5:00 PM ET

PELS TC11: Aerospace Power
Location: Rosen Centre Salon 15

3:45 PM – 4:15 PM ET

A Hybrid Core Design for High Frequency Power Converters
Location: W206

Speaker: Justin Lee – ACME Electronics Corporation

3:45 PM – 4:15 PM ET

AC Direct Digitization of Electricity – The NEW emerging solid-state standard for power management
Location: W203ABC

Speaker: Thar Casey – Amber Semiconductor, Inc.

3:45 PM – 4:15 PM ET

High Performance Inductor Designs Using the Latest Magnetics Materials
Location: Expo Hall Theater #2

Speaker: Chris Turocy – Magnetics

3:45 PM – 4:15 PM ET

Mid-Voltage GaN HEMT (EcoGaN) and Gate Driving Technology
Location: W205BC

Speaker: Kengo Ohmori – ROHM Semiconductor

3:45 PM – 4:15 PM ET

New Solutions for Battery Modeling and Emulation
Location: W204ABC

Speaker: Alan Wadsworth – Keysight Technologies

3:45 PM – 4:15 PM ET

Online SiC System Level Simulation Driven by Advanced PLECS Models
Location: W205A

Speaker: Didier Balocco – onsemi

3:45 PM – 4:15 PM ET

Resistor Selection for Pulse Sensitive Applications
Location: W202BC

Speaker: Tom Morris – TT Electronics

3:45 PM – 4:15 PM ET

Semiconductors & Electronic Components Keeping Your Designs Ahead
Location: Expo Hall Theater #1

Speaker: Aldo Vasquez – IBS Electronics, Inc.

3:45 PM – 4:15 PM ET

TBD
Location: W103

Speaker: Nicholas Kovalsky – KYOCERA AVX

Speaker: Bob Herrejon – Sumida America Inc.

4:30 PM – 6:00 PM ET

RAP Session 1: Batteries Versus Fuel Cells for Future Electrification Applications
Location: W109A

Chair: Sheldon Williamson – Ontario Tech University

Panelist: Gui-Jia Su – Oak Ridge National Laboratory

Panelist: Samuel Haberl, Sr. – Our Next Energy (ONE)

Panelist: Uday Deshpande – D&V Electronics

Panelist: Rick Szymczyk – Upstartz Energy

Speaker: Moderator Moderator

4:30 PM – 6:00 PM ET

RAP Session 2: Topologies and Circuits for Power Supply on Chip (PWRSOC) Versus Discrete Implementations
Location: W110

Chair: Indumini Ranmuthu – Texas Instruments Inc.

Panelist: Séamus Martin O'Driscoll, MEng – (MCCI Group) Tyndall National Institute

Panelist: Alex Prodic – University of Toronto Edward S. Rogers Sr. Department of Electrical and Computer Engineering

Panelist: Dragan Maksimovic – University of Colorado Boulder

Panelist: Robert Pilawa-Podgurski – University of California-Berkeley

Speaker: Moderator Moderator

4:30 PM – 6:00 PM ET

RAP Session 3: Where Does High Impact Innovation in Power Electronics Come From: Academia or Industry?
Location: W109B

Chair: Eric Persson – Infineon Technologies Americas Corp

Panelist: Christina Dimarino – Virginia Tech

Panelist: Johann W. Kolar – ETH Zurich, Power Electronic Systems Laboratory

Panelist: Thomas Byrd – Lockheed Martin, Power Electronics and Power Systems

Panelist: Laszlo Balogh – Texas Instruments

Speaker: Moderator Moderator

7:00 PM – 9:00 PM ET

IAS/PELS/PSMA Young Professionals Reception
Location: Taverna Opa

Speaker: APEC 2023

7:00 PM – 9:00 PM ET

IEEE IAS/PELS/PSMA Young Professional Reception
Location: Taverna Opa

7:00 AM – 5:30 PM ET

Speaker Ready Room Open Wednesday
Location: W107

Speaker: APEC 2023

8:00 AM – 9:00 AM ET

WIE, YP, and you breakfast! How to get involved with PELS and PSMA
Location: Rosen Centre Salon 21/22

8:00 AM – 9:00 AM ET

WIE, YP, AND YOU: HOW TO BECOME INVOLVED WITH IEEE PELS AND PSMA, TOO!
Location: Salon 20/21 (Rosen Centre)

Speaker: APEC 2023

8:00 AM – 2:00 PM ET

Registration Open Wednesday
Location: West A Lobby

Speaker: APEC 2023

8:30 AM – 11:55 AM ET

IS07 - Power Modules for Traction Drive Applications
Location: W203ABC

Industry Session Chair: Lincoln Xue – Oak Ridge National Lab

Industry Session Chair: Shajjad Chowdhury – Oak Ridge National Lab

8:30 AM – 8:55 AM ET

IS07.1 - Power-dense engine coolant capable 200kW 1050VDC inverter enabled by highly integrated six-pack SiC power module
Location: W203ABC

Industry Session Presenter: Brij N. Singh, PhD – John Deere

Power Modules for Traction Drive Applications

8:55 AM – 9:20 AM ET

IS07.2 - Advanced Substrate Materials for Power Modules
Location: W203ABC

Industry Session Presenter: Glenn Catlin – DuPont Silicon Valley Technology Center (SVTC)

Power Modules for Traction Drive Applications

9:20 AM – 9:45 AM ET

IS07.3 - Improving Heat Conduction of Insulated Metal Substrate with Advanced Ceramic Materials for SiC Power Module Packaging
Location: W203ABC

Industry Session Presenter: Wei Fan – Momentive Technologies Inc

Power Modules for Traction Drive Applications

9:45 AM – 10:10 AM ET

IS07.4 - Packaging of Double-Side Cooled SiC Power Module for 100 kW/Liter Traction Inverter
Location: W203ABC

Industry Session Presenter: Guo-Quan (GQ) Lu – Virginia Tech

Power Modules for Traction Drive Applications

10:40 AM – 11:05 AM ET

IS07.5 - Power Module Architectures for Traction Drive Applications
Location: W203ABC

Industry Session Presenter: Alan Mantooth – University of Arkansas

Power Modules for Traction Drive Applications

11:05 AM – 11:30 AM ET

IS07.6 - Power Module with Electrical and Thermal Integration
Location: W203ABC

Industry Session Presenter: Lincoln Xue – Oak Ridge National Lab

Power Modules for Traction Drive Applications

11:30 AM – 11:55 AM ET

IS07.7 - Thermomechanical Reliability Aspects of Automotive Power Electronics Current Status and Future Trends
Location: W203ABC

Industry Session Presenter: Douglas DeVoto – NREL

Power Modules for Traction Drive Applications

8:30 AM – 11:55 AM ET

IS08 - Integrated WBG Semiconductors - Enhancing Power Density and Reducing Part Count
Location: W206

Industry Session Chair: Ajay Hari – Onsemi

Industry Session Chair: Llew Vaughan-Edmunds – Navitas Semiconductor

8:30 AM – 8:55 AM ET

IS08.1 - Power Steering Application Using eGaN® Integrated Circuit
Location: W206

Industry Session Presenter: Marco Palma – Efficient Power Conversion

Integrated WBG Semiconductors - Enhancing Power Density and Reducing Part Count

8:55 AM – 9:20 AM ET

IS08.2 - Half Bridge GaN Power IC Simplify Active Clamp Fly-back Design for High Power Density Chargers
Location: W206

Industry Session Presenter: Brian King – Texas Instruments

Integrated WBG Semiconductors - Enhancing Power Density and Reducing Part Count

9:20 AM – 9:45 AM ET

IS08.3 - High-Voltage GaN Power ICs: Strengths, Gaps, and Opportunities
Location: W206

Industry Session Presenter: Olivier Trescases – University of Toronto

Integrated WBG Semiconductors - Enhancing Power Density and Reducing Part Count

9:45 AM – 10:10 AM ET

IS08.4 - Future Prospects on Monolithic GaN Versus Discrete GaN for Power
Location: W206

Industry Session Presenter: Mike IG Wens, PhD – MinDCet NV

Integrated WBG Semiconductors - Enhancing Power Density and Reducing Part Count

10:40 AM – 11:05 AM ET

IS08.5 - Integrated GaN Solution for LV Applications: Bringing Efficiency and Operating Frequency to the Next Level
Location: W206

Industry Session Presenter: Pengju Kong – Innoscience

Integrated WBG Semiconductors - Enhancing Power Density and Reducing Part Count

11:05 AM – 11:30 AM ET

IS08.6 - Integrated GaN Partitioning: Challenges and Solutions
Location: W206

Industry Session Presenter: Anthony Sanders – Infineon

Integrated WBG Semiconductors - Enhancing Power Density and Reducing Part Count

11:30 AM – 11:55 AM ET

IS08.7 - Optimizing Your Plate at the Power Semiconductor Technology Buffet
Location: W206

Industry Session Presenter: Doug Bailey – Power Integrations

Integrated WBG Semiconductors - Enhancing Power Density and Reducing Part Count

8:30 AM – 11:55 AM ET

IS09 - AC-DC Converter Applications
Location: W204ABC

Industry Session Chair: Francesco Di Domenico – Infineon Technologies

Industry Session Chair: Alessandro Pevere, PhD – Infineon Technologies

8:30 AM – 8:55 AM ET

IS09.1 - Control Challenges in a Totem Pole Bridgeless PFC
Location: W204ABC

Industry Session Presenter: Sheng-Yang Yu, PhD – Texas Instruments, Inc.

AC-DC Converter Applications

8:55 AM – 9:20 AM ET

IS09.2 - Compact and Efficient AC/DC Power Supply for Edge Computing Outdoor Applications
Location: W204ABC

Industry Session Presenter: Alessandro Pevere, PhD – Infineon Technologies

AC-DC Converter Applications

9:20 AM – 9:45 AM ET

IS09.3 - Design Optimization of Hybrid Technology PFC Stage in Bidirectional on Board Charger with WBG Power Semiconductors
Location: W204ABC

Industry Session Presenter: Giuseppe Aiello, PhD – STMicroelectronics

AC-DC Converter Applications

9:45 AM – 10:10 AM ET

IS09.4 - Comparison of ZVS Topologies for 250W AC/DC Battery Chargers
Location: W204ABC

Industry Session Presenter: Sarmad Abedin – texas instruments

AC-DC Converter Applications

10:40 AM – 11:05 AM ET

IS09.5 - EMI Filter and Modulation Optimization for Power Factor Correction in Avionic Applications
Location: W204ABC

Industry Session Presenter: Roberto Scibilia – TEXAS INSTRUMENTS

AC-DC Converter Applications

11:05 AM – 11:30 AM ET

IS09.6 - Comparison of Methods for Parallel Operation of Boost Power Factor Converters
Location: W204ABC

Industry Session Presenter: Richard Hester – Power Integrations

AC-DC Converter Applications

11:30 AM – 11:55 AM ET

IS09.7 - The Effect of Power Factor Correction (PFC) in Optimizing Efficiency and Regulation in a 720 W LLC Resonant SMPS
Location: W204ABC

Industry Session Presenter: MC De La Pena – Power Integrations

AC-DC Converter Applications

8:30 AM – 11:55 AM ET

IS10 - Latest 3D-Packaging Technology for Power Electronics
Location: W205BC

Industry Session Chair: John Bultitude – Kemet Corporation

Industry Session Chair: Brian Narveson – Narveson Innovative Consulting

8:30 AM – 8:55 AM ET

IS10.1 - Manufacturing Challenges and Qualification of 3D Packaging
Location: W205BC

Industry Session Presenter: Charles Woychik – Skywater Technology Foundry

Latest 3D-Packaging Technology for Power Electronics

8:55 AM – 9:20 AM ET

IS10.2 - Sintering Innovations for Power Electronics Packaging & Assembly
Location: W205BC

Industry Session Presenter: Gyan Dutt – MacDermid Alpha Electronics Solutions

Latest 3D-Packaging Technology for Power Electronics

9:20 AM – 9:45 AM ET

IS10.3 - Voice of the Customer presentation on Form Factor by IBM
Location: W205BC

Industry Session Presenter: Eric Swenson, MSEE – IBM

Latest 3D-Packaging Technology for Power Electronics

9:45 AM – 10:10 AM ET

IS10.4 - Aluminium liquid cooled heatsink and Friction Stir Welding (FSW): a high efficiency and low-cost solution for EV thermal management
Location: W205BC

Industry Session Presenter: Laurent Dubourg – Stirweld

Latest 3D-Packaging Technology for Power Electronics

10:40 AM – 11:05 AM ET

IS10.5 - Power Module Packaging Using Direct Write Technology
Location: W205BC

Industry Session Presenter: Mark Poliks – Binghamton University

Latest 3D-Packaging Technology for Power Electronics

11:05 AM – 11:30 AM ET

IS10.6 - Power Electronics Packaging - Engineering Art and System Perspective
Location: W205BC

Industry Session Presenter: Richard Zhang – Virginia Tech CPES

Latest 3D-Packaging Technology for Power Electronics

11:30 AM – 11:55 AM ET

IS10.7 - Scalable magnetic thin film multilayering technology for power inductor integration in laminates
Location: W205BC

Industry Session Presenter: Pulugurtha Raj – Florida International University

Latest 3D-Packaging Technology for Power Electronics

8:30 AM – 11:55 AM ET

IS11 - Motor Drives and Control
Location: W202BC

Industry Session Chair: Lei Han – Infineon Technologies

Industry Session Chair: Nathan Croft – IONA

8:30 AM – 8:55 AM ET

IS11.1 - High Frequency Impact on Electrical Motors and Drives
Location: W202BC

Industry Session Presenter: Eslam Alfawy – Infineon technologies AG

Motor Drives and Control

8:55 AM – 9:20 AM ET

IS11.2 - A Novel Method for Sensorless Control of a Single-Phase Brushless DC Motor Based on Flux Observation
Location: W202BC

Industry Session Presenter: John Emmanuel Tan – Power Integrations

Motor Drives and Control

9:20 AM – 9:45 AM ET

IS11.3 - Novel Alignment and Start-Up Methodology for Sensorless Single-Phase BLDC Motors with an Asymmetric Air Gap
Location: W202BC

Industry Session Presenter: Sharmaine Marcos – Power Integrations

Motor Drives and Control

9:45 AM – 10:10 AM ET

IS11.4 - Design Considerations for Ultra-High Speed 3-Phase Motor Drive Applications
Location: W202BC

Industry Session Presenter: Lei Han – Infineon Technologies

Motor Drives and Control

10:40 AM – 11:05 AM ET

IS11.5 - How to Test an Existing Power Supply for Stability and Dynamic Response
Location: W202BC

Industry Session Presenter: Josh Mandelcorn – Texas Instruments

Motor Drives and Control

11:05 AM – 11:30 AM ET

IS11.6 - Finite Control Set Model Predictive Control for Power Converters Enabled by Recent 32-bit Microcontrollers
Location: W202BC

Industry Session Presenter: Giuseppe Aiello, PhD – STMicroelectronics

Motor Drives and Control

11:30 AM – 11:55 AM ET

IS11.7 - Type III Voltage Compensation Strategy for Digital Average Current Control in Single-Phase Unipolar Inverters
Location: W202BC

Industry Session Presenter: Lotfi Beghou – DRS Pivotal Power Inc

Motor Drives and Control

8:30 AM – 11:55 AM ET

IS12 - Reliability - the Good, the Bad, the Risky in Preventing Catastrophe in the Industry
Location: W205A

Industry Session Chair: Crystal Yannarella – L3Harris

Industry Session Chair: Brian Zahnstecher, ME – PowerRox LLC

8:30 AM – 8:55 AM ET

IS12.1 - Case for Standardized Mission Profiles for Automotive
Location: W205A

Industry Session Presenter: Peter Turlo – onsemi

Reliability - the Good, the Bad, the Risky in Preventing Catastrophe in the Industry

8:55 AM – 9:20 AM ET

IS12.2 - The Safety-related Challenges of Using Lithium-ion Batteries
Location: W205A

Industry Session Presenter: Michael Pecht – UMD

Reliability - the Good, the Bad, the Risky in Preventing Catastrophe in the Industry

9:20 AM – 9:45 AM ET

IS12.3 - 900V GaN –Designing for Reliability
Location: W205A

Industry Session Presenter: Likun Shen – Transphorm

Reliability - the Good, the Bad, the Risky in Preventing Catastrophe in the Industry

9:45 AM – 10:10 AM ET

IS12.4 - A Heirarchy of Failure Modes affecting the reliability of Embedded Software in Marine Power Conversion Applications
Location: W205A

Industry Session Presenter: Benjamin Morris – L3Harris

Reliability - the Good, the Bad, the Risky in Preventing Catastrophe in the Industry

10:40 AM – 11:05 AM ET

IS12.5 - Intelligent Design of Fanless Power Supplies for Optimizing Thermal Management
Location: W205A

Industry Session Presenter: Christoph Butzhammer – RECOM-Power

Reliability - the Good, the Bad, the Risky in Preventing Catastrophe in the Industry

11:05 AM – 11:30 AM ET

IS12.6 - Impacts and Methods for Design Reliability in Military Power System Applications
Location: W205A

Industry Session Presenter: Joaquin Gabriels – L3Harris

Reliability - the Good, the Bad, the Risky in Preventing Catastrophe in the Industry

11:30 AM – 11:55 AM ET

IS12.7 - Electrolytic Capacitors – how to make sure to achieve desired reliability and application life performance
Location: W205A

Industry Session Presenter: Stephan Menzel, MEng, MA – CapXon

Reliability - the Good, the Bad, the Risky in Preventing Catastrophe in the Industry

8:30 AM – 12:00 PM ET

T09 - Resonant Converters
Location: W101

Technical Lecture Session Chair: Bing Lu, PhD – Texas Instruments

Technical Lecture Session Chair: Yeonho Jeong – University of Rhode Island

8:30 AM – 8:50 AM ET

T09.1 - Automatic Resonant Frequency Tracking for Primary-Side Regulation LLC Based on Magnetizing Current Cancellation
Location: W101

Technical Lecture Presenter: Cheng Gu – Southeast University

Resonant Converters

8:50 AM – 9:10 AM ET

T09.2 - Evaluation of a High-Frequency Wide-Gain Range Series Resonant Converter with Delay Time Control for Electric Vehicle Charging
Location: W101

Technical Lecture Presenter: Satyaki Mukherjee, PhD – Delta Electronics (Americas)

Resonant Converters

9:10 AM – 9:30 AM ET

T09.3 - Design of Series-Resonator Buck Converter with Minimal Circulating Energy
Location: W101

Technical Lecture Presenter: Cong Tu, PhDCandidate – Virginia Polytechnic Institute and State University

Hard- and Soft-Switched

9:30 AM – 9:50 AM ET

T09.4 - MHz-Driving Current-Fed Snubber-Less ZCS Multi-Resonant DC-DC Converter with High Step-Up Voltage Ratio
Location: W101

Technical Lecture Presenter: Tomokazu Mishima – Kobe University

Resonant Converters

9:50 AM – 10:10 AM ET

T09.5 - A Series/Parallel Magnetic-Less Step-Down Converter Based on Piezoelectric Resonators
Location: W101

Technical Lecture Presenter: Wen-Chin Liu – UCSD

Resonant Converters

10:40 AM – 11:00 AM ET

T09.6 - Load-Independent Constant-Current/Zero-Current Switching Inverter with Series Resonant Filter
Location: W101

Technical Lecture Presenter: Yutaro Komiyama – Chiba University

Resonant Converters

11:00 AM – 11:20 AM ET

T09.7 - Design and Control of a Wide-Output-Voltage-Range Resistance Compression Network-Based Resonant DC-DC Converter with Synchronous Rectifiers
Location: W101

Technical Lecture Presenter: Firehiwot Gurara – Cornell University

Resonant Converters

11:20 AM – 11:40 AM ET

T09.8 - Utilization of EMI Shielding in PCB Matrix Transformer for Inductor Integration in High Power Density Resonant Converter
Location: W101

Technical Lecture Presenter: Ahmed Salah Nabih, MA – Virginia Tech

Resonant Converters

11:40 AM – 12:00 PM ET

T09.9 - Multilevel Pulse Width Modulation Resonant Converter with Excellent Efficiency Under a Wide Input Voltage Range
Location: W101

Technical Lecture Presenter: PENG FANG, PhD – University of Minnesota Duluth

Resonant Converters

8:30 AM – 12:00 PM ET

T10 - Power Quality & Grid Interface
Location: W102

Technical Lecture Session Chair: Khurram Afridi, PhD – Cornell University

Technical Lecture Session Chair: Omid Beik – North Dakota State University

8:30 AM – 8:50 AM ET

T10.1 - Complementary Commutation-Based Π-Type DC SSCB
Location: W102

Technical Lecture Presenter: Reza Kheirollahi – Drexel University

Power Generation, Transmission and Distribution

8:50 AM – 9:10 AM ET

T10.2 - A Novel Two-Degrees-of-Freedom Current Controller Based on Virtual Impedance for Grid-Connected Inverters Under Unbalanced Conditions
Location: W102

Technical Lecture Presenter: Lukas Antonio Budiwicaksana – Yeungnam University

Power Quality, UPS, Filters

9:10 AM – 9:30 AM ET

T10.3 - Asymmetrical Faults Correction Capability in a Power Insertion and Voltage Compensation System
Location: W102

Technical Lecture Presenter: Darlan Fernandes – Federal University of Paraiba

Power Quality, UPS, Filters

9:30 AM – 9:50 AM ET

T10.4 - An Efficient High-Power-Density Integrated Trap-LCL Filter for Inverters
Location: W102

Technical Lecture Presenter: Neda Mazloum – University of Alberta

Power Quality, UPS, Filters

9:50 AM – 10:10 AM ET

T10.5 - MDSOGI Based Selective Virtual Impedance Method for Grid-Connected Inverters in an Unbalanced and Distorted Weak Grid
Location: W102

Technical Lecture Presenter: Mehmet Akdogan – The University of Texas at San Antonio

Power Quality, UPS, Filters

10:40 AM – 11:00 AM ET

T10.6 - Common-Mode Current Reduction of Paralleled Dual Converters for Bipolar DC Distribution
Location: W102

Technical Lecture Presenter: Bowei Li – University of Alberta

Power Generation, Transmission and Distribution

11:00 AM – 11:20 AM ET

T10.7 - Direct Digital Control and Capacitor Current Compensation to Improve Grid-Current Distortion for Three-Phase Three-Wire LCL Grid-Connected Inverter Under Distorted Grid Voltages
Location: W102

Technical Lecture Presenter: Tsai-Fu Wu, PhD – National Tsing Hua University

Power Quality, UPS, Filters

11:20 AM – 11:40 AM ET

T10.8 - Simultaneous Overvoltage and Overcurrent Mitigation of Grid-Forming Inverters Under a Single-Line-Ground Fault
Location: W102

Technical Lecture Presenter: Han Zhang – University of Alberta

SmartGrid

11:40 AM – 12:00 PM ET

T10.9 - Output Voltage Control via Dynamic Cancellation of a GaN-Based High-Power-Density Single-Phase Transformer-Less Online UPS
Location: W102

Technical Lecture Presenter: Maida Farooq – Cornell University

UPS

8:30 AM – 12:00 PM ET

T11 - Energy Management & Control Within Renewable Energy Systems
Location: W103

Technical Lecture Session Chair: Adam Skorek – University of Québec at Trois-Rivières

Technical Lecture Session Chair: Ran Mo – Shell

8:30 AM – 8:50 AM ET

T11.1 - State-of-Energy Balancing Control with Cascaded H-Bridge for Second-Life Batteries
Location: W103

Technical Lecture Presenter: Ariya Sangwongwanich – Aalborg University

Energy Storage Systems

8:50 AM – 9:10 AM ET

T11.2 - An MPC Based Power Management Method for Renewable Energy Hydrogen Based DC Microgrids
Location: W103

Technical Lecture Presenter: Mengfan Zhang – KTH royal institute of technology

Microgrid Systems

9:10 AM – 9:30 AM ET

T11.3 - An Optimal Clustering Algorithm for Second Use of Retired EV Batteries Using DBSCAN and PCA Schemes Considering Performance Deviation
Location: W103

Technical Lecture Presenter: Je Yeong Lim – Sungkyunkwan University

Energy Storage Systems

9:30 AM – 9:50 AM ET

T11.4 - Multi-Time Scale Synchronization and Adaptive Power Sharing Control Scheme for Grid Forming Inverters in a Power Electronics Dominated Grid
Location: W103

Technical Lecture Presenter: Silvanus D’Silva – University of Illinois Chicago

Microgrid Systems

9:50 AM – 10:10 AM ET

T11.5 - Seamless Grid-Following to Grid-Forming Transition of Inverters Supplying a Microgrid
Location: W103

Technical Lecture Presenter: Fahmid Sadeque – Kansas State University

Microgrid Systems

10:40 AM – 11:00 AM ET

T11.6 - Rapid Curve Scanning Global MPPT for PV Applications Under Partial Shading
Location: W103

Technical Lecture Presenter: Ignacio Galiano Zurbriggen, PhD – University of Calgary

Maximum power point tracking (MPPT)

11:00 AM – 11:20 AM ET

T11.7 - DAB-Based Energy Storage System with Flexible Voltage Configuration and Extended Power Capability
Location: W103

Technical Lecture Presenter: Emanuel Serban, PhD – UBC - EnerSys

Energy Storage Systems

11:20 AM – 11:40 AM ET

T11.8 - State-of-Charge Equalizations Comparison in a Multi-Prosumer Environment Based on Real-Time Energy Management Systems with IoT-Support
Location: W103

Technical Lecture Presenter: Enrique A. Sanabria-Torres, MA – Sonnen Inc

Microgrid Systems

11:40 AM – 12:00 PM ET

T11.9 - Frequency Model for EMI Study of Three-Phase Grid Connected Photovoltaic Inverter on Both DC and AC Sides
Location: W103

Technical Lecture Presenter: Morteza Tadbiri Nooshabadi – Univ Grenoble Alpes

Photovoltaic (PV) Inverters and Micro Inverters

8:30 AM – 12:00 PM ET

T12 - GaN Power Devices
Location: W109A

Technical Lecture Session Chair: Hengzhao Yang – Shanghai Tech University

Technical Lecture Session Chair: Jason Neely – Sandia National Laboratories

8:30 AM – 8:50 AM ET

T12.1 - GaN HEMT Improves Overall Performance in ZVS Totem Pole PFC Converters
Location: W109A

Technical Lecture Presenter: Rosario Attanasio – STMicroelectronics

GaN HEMTs

8:50 AM – 9:10 AM ET

T12.2 - Factors Affecting Self-Sustained Switching Oscillations of Cascode GaN Devices and Mitigation Strategy During Parameter Design
Location: W109A

Technical Lecture Presenter: Francesco Iannuzzo – Aalborg University

GaN HEMTs

9:10 AM – 9:30 AM ET

T12.3 - A Fast On-State Drain-to-Source Voltage Amplifier for the Dynamic Characterization of GaN Power Transistors
Location: W109A

Technical Lecture Presenter: Mathias Weiser – University of Stuttgart

GaN HEMTs

9:30 AM – 9:50 AM ET

T12.4 - PCB Design Impact on GaN-Based Converter Operation
Location: W109A

Technical Lecture Presenter: Oleksandr Husev, PhD – Tallinn University of Technology

GaN HEMTs

9:50 AM – 10:10 AM ET

T12.5 - Investigation on Physical Origins of Output Capacitance Loss in Cascode GaN HEMTs
Location: W109A

Technical Lecture Presenter: Qihao Song – Virginia Tech

GaN HEMTs

10:40 AM – 11:00 AM ET

T12.6 - High Current Turn-Off of GaN HEMT for Solid-State Circuit Breaker at Cryogenic Temperatures
Location: W109A

Technical Lecture Presenter: Zhou Dong – University of Tennessee at Knoxville

GaN HEMTs

11:00 AM – 11:20 AM ET

T12.7 - Superior Threshold-Voltage and On-Resistance Stability in GaN HEMTs Enabled by a Gate ESD Protection Circuit
Location: W109A

Technical Lecture Presenter: Bixuan Wang – CPES Virginia Tech

GaN HEMTs

11:20 AM – 11:40 AM ET

T12.8 - GaN HEMTs in High-Frequency Overvoltage Switching: Electrical or Thermal Failure?
Location: W109A

Technical Lecture Presenter: Ruizhe Zhang – Virginia Polytechnic Institute and State University

GaN HEMTs

11:40 AM – 12:00 PM ET

T12.9 - Voltage Reference and Zero Current Detector Monolithically Integrated on p-GaN Technology Designed for Process Corners Compensation
Location: W109A

Technical Lecture Presenter: Cedric Reymond

GaN HEMTs

8:30 AM – 12:00 PM ET

T13 - Inverters & Emerging Applications
Location: W104

Technical Lecture Session Chair: Woongkul Lee – Michigan State University

Technical Lecture Session Chair: Ali Safayet – Halla Mechatronics

8:30 AM – 8:50 AM ET

T13.1 - Chattering Suppression of Sliding Mode Observer in Load Torque Estimation
Location: W104

Technical Lecture Presenter: Hyunjun Lee – SEOUL NATIONAL UNIVERSITY

AC, DC, BLDC Motor Drives

8:50 AM – 9:10 AM ET

T13.2 - Heterotypic Current Transformer Design for Overcurrent Protection of SiC MOSFET
Location: W104

Technical Lecture Presenter: Xia Du, PhD – University of Arkansas

Sensor Integration

9:10 AM – 9:30 AM ET

T13.3 - Electrosurgery Power Electronics: A Revolution in the Making
Location: W104

Technical Lecture Presenter: Sudip Mazumder – University of Illinois at Chicago

Single- and Multi-Phase Inverters

9:30 AM – 9:50 AM ET

T13.4 - Simple Active Short Circuit Strategy for Air Conditioning Systems
Location: W104

Technical Lecture Presenter: Bumun Jung – Samsung Electronics

AC, DC, BLDC Motor Drives

9:50 AM – 10:10 AM ET

T13.5 - Demonstration of a Class E Push-Pull Resonant Inverter for MHz Induction Heating
Location: W104

Technical Lecture Presenter: Thore Stig Aunsborg – Aalborg University

Single- and Multi-Phase Inverters

10:40 AM – 11:00 AM ET

T13.6 - Design and Optimization of a High-Current Versatile Arbitrary Waveform Generator
Location: W104

Technical Lecture Presenter: Ignacio Álvarez-Gariburo – University of Zaragoza

Single- and Multi-Phase Inverters

11:00 AM – 11:20 AM ET

T13.7 - Frequency Spectrum Analysis of Partial Discharge Activities in WBG-Based AC Machine Drives
Location: W104

Technical Lecture Presenter: Kangbeen Lee – Michigan State University

AC, DC, BLDC Motor Drives

8:30 AM – 12:00 PM ET

T14 - Control of Power Electronic Converters I
Location: W105

Technical Lecture Session Chair: Jaber Abu Qahouq, PhD – The University of Alabama

Technical Lecture Session Chair: Bridget O'Gorman – Trane Technologies

8:30 AM – 8:50 AM ET

T14.1 - Relative Gain Array Based Decoupled Controller Design for GaN-Based Multiple Output Flyback Converter
Location: W105

Technical Lecture Presenter: Arnab Sarkar – Indian Institute of Technology Bombay

Control of Power Electronic Converters

8:50 AM – 9:10 AM ET

T14.2 - Minimum Deviation Controller for 3 Level Flying Capacitor Boost Converters
Location: W105

Technical Lecture Presenter: Ksenija Josipovic – University of Toronto

Control of Power Electronic Converters

9:10 AM – 9:30 AM ET

T14.3 - A Simplified Quadrangle Current Modulation for Four-Switched Buck-Boost Converter (FSBB) with a Novel Small Signal Model
Location: W105

Technical Lecture Presenter: Yijie Bai – Virginia Polytechnic Institute and State University

Control of Power Electronic Converters

9:30 AM – 9:50 AM ET

T14.4 - An Optimized Modulation Scheme for the Triple-Active-Bridge Converter Containing Current-Fed Full-Bridge Terminal
Location: W105

Technical Lecture Presenter: Yue Zhang – University of Alberta

Control of Power Electronic Converters

9:50 AM – 10:10 AM ET

T14.5 - Control Architecture for Full Bridge LLC Series Resonant Converters Using Output Diode Current
Location: W105

Technical Lecture Presenter: Anuj Maheshwari – UIUC

Control of Power Electronic Converters

10:40 AM – 11:00 AM ET

T14.6 - A Novel Starting-Up Method for Dual Active Bridge Converter Based on Computer Assistant Simulation
Location: W105

Technical Lecture Presenter: Haoyuan Jin – Xi'an Jiaotong University

Control of Power Electronic Converters

11:00 AM – 11:20 AM ET

T14.7 - Frequency Domain Design Techniques in Digitally Voltage and Current Mode Controlled DC-DC Converters with Fast Transient Performance
Location: W105

Technical Lecture Presenter: Anirban Nanda – IIT Kharagpur

Digital Control

11:20 AM – 11:40 AM ET

T14.8 - An On-Chip DC to 42.8 MHz Bandwidth Readout Interface for Hybrid Current Sensor
Location: W105

Technical Lecture Presenter: Ayesha Hassan – University of Arkansas

Sensor and Sensor-less Control

11:40 AM – 12:00 PM ET

T14.9 - A High-Bandwidth Parallel Active Balancing Controller for Current-Controlled Flying Capacitor Multilevel Converters
Location: W105

Technical Lecture Presenter: Rahul K. Iyer – University of California Berkeley

Control of Power Electronic Converters

8:30 AM – 12:00 PM ET

T15 - Wireless Power Transfer I
Location: W109B

Technical Lecture Session Chair: Jungwon Choi – University of Minnesota Twin Cities

Technical Lecture Session Chair: Chris Mi – San Diego State University

8:30 AM – 8:50 AM ET

T15.1 - Filter-Integrated LCC Compensation for Wireless Charging System
Location: W109B

Technical Lecture Presenter: Taeyeon Lee – Wipowerone

Wireless charging

8:50 AM – 9:10 AM ET

T15.2 - A Reconfigurable LCC-P/S Compensated Three-Phase Wireless Charging Topology with Constant Current and Constant Voltage Output
Location: W109B

Technical Lecture Presenter: Yuming Chen – Texas A&M University

Wireless charging

9:10 AM – 9:30 AM ET

T15.3 - Fully Compensated Self-Resonant Coil with Low E-Field and Low Profile for Consumer Electronics Wireless Charging
Location: W109B

Technical Lecture Presenter: Ruiyang Qin – The University of Tennessee Knoxville

Wireless charging

9:30 AM – 9:50 AM ET

T15.4 - Optimization of Efficiency and Receiver-Coil Mass in an Autonomous 700-W S-S IPT System for UAV Applications
Location: W109B

Technical Lecture Presenter: Muhammad Abdelraziq – North Carolina State University

Wireless charging

9:50 AM – 10:10 AM ET

T15.5 - A Wireless Charging and NFC Integration Technique Based on High-Frequency Impedance Characterization of Wireless Charging Coils
Location: W109B

Technical Lecture Presenter: Zhedong Ma, PhD candidate – University of Florida

Wireless charging

10:40 AM – 11:00 AM ET

T15.6 - A Sandwich Structure for Cost-Effective Printed-Circuit-Board Wireless Power Resonator
Location: W109B

Technical Lecture Presenter: Ron Shu Yuen Hui – Nanyang Technological University

Wireless charging

11:00 AM – 11:20 AM ET

T15.7 - Optimization of Spiral Coil Design for WPT Systems Using Machine Learning
Location: W109B

Technical Lecture Presenter: Minki Kim – University of Minnesota Twin Cities

Wireless charging

11:20 AM – 11:40 AM ET

T15.8 - An Integrated Capacitive Power Transfer System for Field Excitation of Wound Field Synchronous Machine
Location: W109B

Technical Lecture Presenter: Syed Muhammad Hassan Gillani

Wireless charging

11:40 AM – 12:00 PM ET

T15.9 - A Frequency Quadrupler Inverter Architecture for High-Power High-Frequency Capacitive Wireless Power Transfer Systems
Location: W109B

Technical Lecture Presenter: Sounak Maji – Cornell University

Wireless charging

8:30 AM – 12:00 PM ET

T16 - Transportation Electrification Applications
Location: W108

Technical Lecture Session Chair: Sheldon Williamson – Ontario Tech University

Technical Lecture Session Chair: Eddy Aeloiza – ABB US Corporate Research

8:30 AM – 8:50 AM ET

T16.1 - A Modified Modulation Scheme for T-Type Traction Inverters to Enhance Low-Speed Range Efficiency in Electric Vehicles
Location: W108

Technical Lecture Presenter: Yousefreza Jafarian – Queen's University

Technical Lecture Presenter: Mohamed Z. Youssef – University of Ontario Institute of Technology

Power Electronics for Hybrid and Electric Cars

8:50 AM – 9:10 AM ET

T16.2 - A Medium-Voltage Multilevel Hybrid Converter Using 3.3 kV Silicon Carbide MOSFETs and Silicon IGBT Modules
Location: W108

Technical Lecture Presenter: Fei Diao – University of Arkansas

Power Electronics for Aerospace

9:10 AM – 9:30 AM ET

T16.3 - Electrical-Thermal-Mechanical Considerations for the Design of a Compact Two-Level Current Source Inverter Using GaN Devices
Location: W108

Technical Lecture Presenter: Mustafeez Ul-Hassan – State University of New York at Stony Brook

Vehicular Power Electronic Circuits and Systems

9:30 AM – 9:50 AM ET

T16.4 - Combined Data Driven and Online Impedance Measurement-Based Lithium-Ion Battery State of Health Estimation for Electric Vehicle Battery Management Systems
Location: W108

Technical Lecture Presenter: Akash Samanta – Ontario Tech University

Power Electronics for Hybrid and Electric Cars

9:50 AM – 10:10 AM ET

T16.5 - Power Loss Balancing Method of Single Source Dual Inverter
Location: W108

Technical Lecture Presenter: Bum-Ryeol Yoon – Dankook University

Vehicular Power Electronic Circuits and Systems

10:40 AM – 11:00 AM ET

T16.6 - Seven-Level Flying-Capacitor Multi-Level Converter for a Differential Power-Processing Interface in Multi-Chemistry EV Battery Packs
Location: W108

Technical Lecture Presenter: Cheng Feng Wang – University of Toronto

Vehicular Power Electronic Circuits and Systems

11:00 AM – 11:20 AM ET

T16.7 - Reconfiguration of Multilevel Inverters and Their Impact on Insulation Breakdown Time
Location: W108

Technical Lecture Presenter: Arshiah Mirza – University of Connecticut

Power Electronics for Hybrid and Electric Cars

11:20 AM – 11:40 AM ET

T16.8 - An Ultra-High Gain Current-Fed Universal Auxiliary Power Module for 400V/800V Electric Vehicles
Location: W108

Technical Lecture Presenter: Liyan Zhu – University of Tennessee-Knoxville

Charging Systems

11:40 AM – 12:00 PM ET

T16.9 - GaN-Based Multiport Resonant Converter for Automotive Applications
Location: W108

Technical Lecture Presenter: Fabian Groon – Kiel University

Power Electronics for Hybrid and Electric Cars

9:00 AM – 10:30 AM ET

ECCE Asia Coordination Committee Meeting
Location: Rosen Centre Salon 18

9:00 AM – 11:00 AM ET

PELS TC 8: Electronic Power Grid Systems
Location: Rosen Centre Salon 15/16

9:00 AM – 11:00 AM ET

PELS VP of Products Committee Meeting
Location: Rosen Centre Salon 17

9:00 AM – 2:00 PM ET

Expo Hall Open - Wednesday
Location: Expo Hall

Speaker: APEC 2023

10:00 AM – 11:00 AM ET

Standard Initiative about Solid State Transformer (P3105)
Location: Rosen Centre Salon 15/16

10:10 AM – 10:40 AM ET

Break in Expo Hall
Location: Expo Hall

Speaker: APEC 2023

11:00 AM – 12:00 PM ET

PELS Members Congress Meeting
Location: Rosen Centre Salon 18

11:45 AM – 1:30 PM ET

Wednesday Lunch in Expo Hall
Location: Expo Hall

Speaker: APEC 2023

12:00 PM – 12:30 PM ET

Advancements in Programmable DC Power Supplies
Location: W202BC

Speaker: Eric Turner – EA Elektro-Automatik, Inc.

12:00 PM – 12:30 PM ET

Better OTS Magnetics
Location: W205A

Speaker: Jonathan Church – Frenetic

12:00 PM – 12:30 PM ET

Challenges and Solutions for Packaging State-of-the-Art SiC Power Devices
Location: W205BC

Speaker: Ming Su – ROHM Semiconductor

12:00 PM – 12:30 PM ET

GaN Roadmap Update
Location: W203ABC

Speaker: Alex Lidow – Efficient Power Conversion Corporation (EPC)

12:00 PM – 12:30 PM ET

MAGProTM – the world’s most comprehensive inductor characterization tools.
Location: Expo Hall Theater #2

Speaker: Len Crane – Coilcraft, Inc.

12:00 PM – 12:30 PM ET

MOSFETS in DIOTEC: Packaged and Solutions
Location: W103

Speaker: Andrew Dixon – DIOTEC Semiconductor Americas

12:00 PM – 12:30 PM ET

Optimizing Your Battery Management System
Location: Expo Hall Theater #1

Speaker: Jorge Lugo, – Mouser Electronics

12:00 PM – 12:30 PM ET

TBD
Location: W102

Speaker: Ryan Herrmann – Heraeus Electronics

12:00 PM – 12:30 PM ET

Testing SCSOA in SiC FETs: The Challenge of Delivering 1000A Safely at High Voltage.
Location: W204ABC

Speaker: Gordon Leak – Focused Test, Inc.

12:00 PM – 12:30 PM ET

UMR Collection of High Voltage Power Supplies
Location: W206

Speaker: Jawanza Hall – Dean Technology, Inc.

12:00 PM – 1:00 PM ET

PELS Conferences Committee Meeting Luncheon
Location: Rosen Centre Salon 17

12:00 PM – 2:00 PM ET

IEEE Transactions on Power Electronics (TPELS) Paper Awards and Editorial Board Meeting
Location: Rosen Centre Salon 15/16

12:45 PM – 1:15 PM ET

A Novel Material Technology that Reduces Tooling Dependency and Process Complexity in Power Module Soldering and Sintering Applications
Location: W202BC

Speaker: Joe Hertline – Indium Corporation

12:45 PM – 1:15 PM ET

Combining proven MOSFET expertise and broad application understanding to develop market-leading application specific MOSFETs for Hotswap applications
Location: W205BC

Speaker: Dwayne Mott – Nexperia

12:45 PM – 1:15 PM ET

GeneSiC high-speed, high-voltage SiC drives high-power innovation
Location: W206

Speaker: Sumit Jadav – GeneSiC Semiconductor

12:45 PM – 1:15 PM ET

High Temperature & High Reliability Design Considerations for Power Inductors and Transformers
Location: Expo Hall Theater #2

Speaker: Keith Blendowski – iNRCORE, LLC

12:45 PM – 1:15 PM ET

Issues in measuring switching losses of SiC & GaN devices in an inductor (magnetic device) load.
Location: W203ABC

Speaker: Ryu Nagahama – IWATSU ELECTRIC CO.,LTD.

12:45 PM – 1:15 PM ET

Predictive maintenance in systems using a gate driver.
Location: W204ABC

Speaker: Riley Beck – Infineon

12:45 PM – 1:15 PM ET

Qorvo Brings Unprecedented Low RDS(on) 750V SiC FETs to the Industry Workhorse Surface Mount Package
Location: W205A

Speaker: Pete Losee – Qorvo

12:45 PM – 1:15 PM ET

Reducing Oscillation in Analog Designs
Location: W102

Speaker: HelenAnn Brown – Apex Microtechnology

12:45 PM – 1:15 PM ET

Four essential factors that will enhance the precision of your power loss analysis
Location: W103

Speaker: Naomichi Miyairi – Hioki USA Corp.

12:45 PM – 1:15 PM ET

The benefits of GaN in consumer AC/DC power delivery
Location: Expo Hall Theater #1

Speaker: David Snook – Texas Instruments

1:00 PM – 4:30 PM ET

PELS VP of Conferences Committee Meeting
Location: Rosen Centre Salon 17

1:30 PM – 2:30 PM ET

PELS DE&I Committee Meeting
Location: Rosen Centre Salon 18

1:30 PM – 4:45 PM ET

PSMA Sponsored Industry Session: Semiconductor IS17
Location: Convention Center, W204ABC

1:30 PM – 4:45 PM ET

IS13 - Gate Driver Applications
Location: W206

Industry Session Chair: Joe Duigan – Allegro Microsystems

Industry Session Chair: Emanuel-Petre Eni, PhD – Infineon Technologies AG

1:30 PM – 1:55 PM ET

IS13.1 - Driving GaNFETS - a Comparative Overview
Location: W206

Industry Session Presenter: Bernard Keogh – Allegro Microsystems

Gate Driver Applications

1:55 PM – 2:20 PM ET

IS13.2 - Eliminating Unwanted Side Effects of Cross-Isolation Capacitance in High Power Switching
Location: W206

Industry Session Presenter: Long V. Nguyen, MS – Skyworks

Gate Driver Applications

2:20 PM – 2:45 PM ET

IS13.3 - Flexible SiC Gate Driver Power Supply Design Strategies
Location: W206

Industry Session Presenter: Brett Sparkman – Wolfspeed

Gate Driver Applications

2:45 PM – 3:10 PM ET

IS13.4 - How to Achieve High Power Density for Isolated Bias Supply of SiC/IGBT Gate Drivers
Location: W206

Industry Session Presenter: Dongbin Hou, PhD – Texas Instruments

Gate Driver Applications

3:30 PM – 3:55 PM ET

IS13.5 - How to Break an Isolated Gate Driver
Location: W206

Industry Session Presenter: Asa Kirby – Skyworks Solutions Inc.

Gate Driver Applications

3:55 PM – 4:20 PM ET

IS13.6 - NextGen Isolated Gate Driver Features for EV/HEV Traction Inverter
Location: W206

Industry Session Presenter: Andy Robles – Texas Instruments

Gate Driver Applications

4:20 PM – 4:45 PM ET

IS13.7 - Pushing the Frontiers of Wide-Bandgap Converters: High Performance SiC Gate-Driving
Location: W206

Industry Session Presenter: Mike IG Wens, PhD – MinDCet NV

Gate Driver Applications

1:30 PM – 4:45 PM ET

IS14 - DC-DC Converter Applications
Location: W203ABC

Industry Session Chair: Diego Raffo – Infineon Technologies

Industry Session Chair: Joseph Khayat – Texas Instruments

1:30 PM – 1:55 PM ET

IS14.1 - Integrated Smart GaN Device for Low Voltage Bidirectional Buck Converter in Mild Hybrid Applications
Location: W203ABC

Industry Session Presenter: Federica Cammarata – STMicroelectronics

DC-DC Converter Applications

1:55 PM – 2:20 PM ET

IS14.2 - Designing an LLC Resonant Converter for Audio Applications with High Peak Load
Location: W203ABC

Industry Session Presenter: Ben Lough – Texas Instruments

DC-DC Converter Applications

2:20 PM – 2:45 PM ET

IS14.3 - Evolution and Comparison of Magnetics for the Multiphase DC-DC Applications
Location: W203ABC

Industry Session Presenter: Alexandr Ikriannikov – Analog Devices

DC-DC Converter Applications

2:45 PM – 3:10 PM ET

IS14.4 - Achieving Low, 1-mV Output Voltage Ripple Noise from a 15-a Synchronous Buck Converter
Location: W203ABC

Industry Session Presenter: Richard Nowakowski – Texas Instruments

DC-DC Converter Applications

3:30 PM – 3:55 PM ET

IS14.5 - Best Practices for Driving High Power Parallel MOSFETs in a Half-Bridge Configuration
Location: W203ABC

Industry Session Presenter: Leslie Marquez Arroyo – Texas Instruments

DC-DC Converter Applications

3:55 PM – 4:20 PM ET

IS14.6 - Input Power Sharing and Limiting for Dual Input Power Over Ethernet Converters
Location: W203ABC

Industry Session Presenter: Darwin Fernandez – Texas Instruments

DC-DC Converter Applications

1:30 PM – 4:45 PM ET

IS15 - Industry Trends Driving Power Electronics
Location: W202BC

Industry Session Chair: Ada Cheng, BSEE MBA – Adaclock

Industry Session Chair: Dinesh Kithany, MBA – Wired & Wireless Technologies (WAWT)

1:30 PM – 1:55 PM ET

IS15.1 - A Peek Into Global Energy Revolution Policies Across Sectors
Location: W202BC

Industry Session Presenter: Michael Willis – The Color Nine Group

Industry Trends Driving Power Electronics

1:55 PM – 2:20 PM ET

IS15.2 - How Wireless Charging Facilitates the Journey Towards Autonomous Driving
Location: W202BC

Industry Session Presenter: Milisav Danilovic, PhD – WiTricity

Industry Trends Driving Power Electronics

2:20 PM – 2:45 PM ET

IS15.3 - Energy Storage Market and Manufacturing: Challenges and Opportunities
Location: W202BC

Industry Session Presenter: Anton Fischer

Industry Trends Driving Power Electronics

2:45 PM – 3:10 PM ET

IS15.4 - Wireless Power Gains Adoption Across Low and Ultra-High-Powered Applications
Location: W202BC

Industry Session Presenter: Dinesh Kithany, MBA – Wired & Wireless Technologies (WAWT)

Industry Trends Driving Power Electronics

3:30 PM – 3:55 PM ET

IS15.5 - Roadmap for Smart Manufacturing in Electronics Manufacturing
Location: W202BC

Industry Session Presenter: Francis Mullany – International Electronics Manufacturing Initiative (iNEMI)

Industry Trends Driving Power Electronics

3:55 PM – 4:20 PM ET

IS15.6 - Power at the Heart of Medical Innovations
Location: W202BC

Industry Session Presenter: Hafiz Khalid – XP Power

Industry Trends Driving Power Electronics

4:20 PM – 4:45 PM ET

IS15.7 - Bend the Curve! Efficiency as a Driver for a Greener Future
Location: W202BC

Industry Session Presenter: George Slama – Würth Elektronik

Industry Trends Driving Power Electronics

1:30 PM – 4:45 PM ET

IS16 - With New Government Focus on Electrification, What Needs to Happen? What is in the Near Future?
Location: W205BC

Industry Session Chair: Fred Weber – Future Technologies Worldwide

Industry Session Chair: Fernando Salcedo, MS-EE – Vehicle Technologies Office (VTO), Department of Energy (DOE)

1:30 PM – 1:55 PM ET

IS16.1 - What are the Gaps in the Charging Infrastructure?
Location: W205BC

Industry Session Presenter: Chris Whaling – Synthesis Partners

With New Government Focus on Electrification, What Needs to Happen? What is in the Near Future?

1:55 PM – 2:20 PM ET

IS16.2 - Bi-directional Charging Topologies - Best Ways to Get Power On and Off the Grid
Location: W205BC

Industry Session Presenter: Matthias Preindl – Columbia University

With New Government Focus on Electrification, What Needs to Happen? What is in the Near Future?

2:20 PM – 2:45 PM ET

IS16.3 - A Summary of EVs@Scale Consortium
Location: W205BC

Industry Session Presenter: Andrew Meintz – National Renewable Energy Laboratory (NREL)

With New Government Focus on Electrification, What Needs to Happen? What is in the Near Future?

2:45 PM – 3:10 PM ET

IS16.4 - Key Component Advancements in Traction Inverter Technology
Location: W205BC

Industry Session Presenter: Burak Ozpineci – Oak Ridge National Laboratory

With New Government Focus on Electrification, What Needs to Happen? What is in the Near Future?

3:30 PM – 3:55 PM ET

IS16.5 - Performance Limits of Magnetic Components and How to Achieve Them
Location: W205BC

Industry Session Presenter: Lukas Mueller – MicroMetals Inc.

With New Government Focus on Electrification, What Needs to Happen? What is in the Near Future?

3:55 PM – 4:20 PM ET

IS16.6 - Avoiding the Speed Trap: How We Need to Rethink the EV Charging Paradigm
Location: W205BC

Industry Session Presenter: Milisav Danilovic, PhD – WiTricity

With New Government Focus on Electrification, What Needs to Happen? What is in the Near Future?

4:20 PM – 4:45 PM ET

IS16.7 - AC vs. DC Charging: What is the best direction?
Location: W205BC

Industry Session Presenter: Fernando Salcedo, MS-EE – Vehicle Technologies Office (VTO), Department of Energy (DOE)

With New Government Focus on Electrification, What Needs to Happen? What is in the Near Future?

1:30 PM – 4:45 PM ET

IS17 - New Challenges and Solutions in Test and Characterization of WBG Power Devices
Location: W204ABC

Industry Session Chair: Jaume Roig – ON Semiconductor

Industry Session Chair: Stephanie Watts Butler – WattsButler LLC

1:30 PM – 1:55 PM ET

IS17.1 - How to Improve Power Device/Module Development Efficiency
Location: W204ABC

Industry Session Presenter: Michael Zimmerman – Keysight

New Challenges and Solutions in Test and Characterization of WBG Power Devices

1:55 PM – 2:20 PM ET

IS17.2 - Characterization of Threshold Voltage Instabilities in SiC Power MOSFETs
Location: W204ABC

Industry Session Presenter: Thomas Aichinger – Infineon

New Challenges and Solutions in Test and Characterization of WBG Power Devices

2:20 PM – 2:45 PM ET

IS17.3 - How to Correctly Select an Oscilloscope Probe for Testing WBG Power Devices
Location: W204ABC

Industry Session Presenter: William Kaunds – Teledyne LeCroy

New Challenges and Solutions in Test and Characterization of WBG Power Devices

2:45 PM – 3:10 PM ET

IS17.4 - Evaluating SiC Gate Bias Voltage Instability at Wafer Level
Location: W204ABC

Industry Session Presenter: Vernon Rogers – Aehr

New Challenges and Solutions in Test and Characterization of WBG Power Devices

3:30 PM – 3:55 PM ET

IS17.5 - Testing SCSOA in SiC FETs: The Challenge of Delivering 1000A Safely at High Voltage
Location: W204ABC

Industry Session Presenter: Gordon Leak – Focused Test

New Challenges and Solutions in Test and Characterization of WBG Power Devices

3:55 PM – 4:20 PM ET

IS17.6 - Flexible WBG Device Testing Methodology to Debug and Improve Reference Design Boards
Location: W204ABC

Industry Session Presenter: Srikrishna N H – Tektronix India Pvt. Ltd.

New Challenges and Solutions in Test and Characterization of WBG Power Devices

4:20 PM – 4:45 PM ET

IS17.7 - Measurement Principles for Optimizing Your Power Electronics Design
Location: W204ABC

Industry Session Presenter: Mike Schnecker – Rohde & Schwarz

New Challenges and Solutions in Test and Characterization of WBG Power Devices

1:30 PM – 4:45 PM ET

IS18 - Safety and Reliability
Location: W205A

Industry Session Chair: Bridget O'Gorman – Trane Technologies

Industry Session Chair: Justin Stricula – Curtiss Wright

1:30 PM – 1:55 PM ET

IS18.1 - 105 °C Capable Supercapacitor with AEC-Q200 Qualification
Location: W205A

Industry Session Presenter: Satoshi Nishishita – TOKIN corporation

Safety and Reliability

1:55 PM – 2:20 PM ET

IS18.2 - Designing and Testing an Automotive Power Tree to Achieve Functional Safety Goals
Location: W205A

Industry Session Presenter: Darwin Fernandez – Texas Instruments

Safety and Reliability

2:20 PM – 2:45 PM ET

IS18.3 - Reliability Analysis of Multisource Discrete SiC MOSFET in High Performance, Long Lifetime Converters
Location: W205A

Industry Session Presenter: Andrea Bianchi – ABB

Safety and Reliability

2:45 PM – 3:10 PM ET

IS18.4 - High End Servo Drive with Real Time Connectivity and Safety Functions
Location: W205A

Industry Session Presenter: Davide Cristaldi – STMicroelectronics

Safety and Reliability

3:30 PM – 3:55 PM ET

IS18.5 - Replacing Electromechanical Relays in Control Systems: Are Solid-State Relays an option?
Location: W205A

Industry Session Presenter: Wolfgang Frank, Dr.-Ing. – Infineon Technologies AG

Safety and Reliability

3:55 PM – 4:20 PM ET

IS18.6 - Smarter Voltage Supervision for Future Autonomous Driving Platform
Location: W205A

Industry Session Presenter: Xiaodan Wang – Monolithic Power System Inc.

Safety and Reliability

4:20 PM – 4:45 PM ET

IS18.7 - Reliability of Gallium Nitride Technology for Energy Conversion
Location: W205A

Industry Session Presenter: Kurt V. Smith – VisIC Technologies Ltd.

Safety and Reliability

1:30 PM – 4:50 PM ET

T17 - Hybrid/Switched Capacitor Converters
Location: W109A

Technical Lecture Session Chair: Sombuddha Chakraborty – Texas Instruments Inc.

Technical Lecture Session Chair: Min Chen – Innoscience

1:30 PM – 1:50 PM ET

T17.1 - 1.2 kW, 12 V Regulated Sigma Converter for 48 V Data Centers with 1 kW/in3 Power Density
Location: W109A

Technical Lecture Presenter: Mario Ursino, PhD – Infineon Technology AT

Hard- and Soft-Switched

1:50 PM – 2:10 PM ET

T17.2 - 2-Phase Series Capacitor Synchronous Rectifier in Active Clamp Forward Converter
Location: W109A

Technical Lecture Presenter: Katsuhiro Hata – The University of Tokyo

Voltage Regulator Modules (VRM)

2:10 PM – 2:30 PM ET

T17.3 - A GaN-Based Reconfigurable Series-Parallel Hybrid Converter Supporting 48/24/12V Input and 0.8-1.2V Output with 83.7/87.8/90.7% Peak Efficiency
Location: W109A

Technical Lecture Presenter: Minxiang Gong – Georgia Institute of Technology

Hard- and Soft-Switched

2:30 PM – 2:50 PM ET

T17.4 - Fully Soft-Switching Flying Capacitor Based Quasi-Resonant Boost Converter
Location: W109A

Technical Lecture Presenter: Kumar Joy Nag – University of Toronto

Hard- and Soft-Switched

2:50 PM – 3:10 PM ET

T17.5 - High Power Density 4:1 Resonant Switched-Capacitor DC-DC Converter for Pol Applications
Location: W109A

Technical Lecture Presenter: Alessandro Dago – Politecnico di Milano

Point-of-Load (PoL) and Multi-Phase Converters

3:30 PM – 3:50 PM ET

T17.6 - A Zero-Voltage-Switching 3-Level Buck Converter Achieving 30% Loss Reduction at Light Load for USB-C Charger Applications
Location: W109A

Technical Lecture Presenter: Tianshi Xie – UC San Diego

Hard- and Soft-Switched

3:50 PM – 4:10 PM ET

T17.7 - Quasi-Regulation and Mismatch Mitigation Technique for Switched Tank Converters
Location: W109A

Technical Lecture Presenter: Mattia Balutto – University of Udine

Hard- and Soft-Switched

4:10 PM – 4:30 PM ET

T17.8 - Multi-Inductor Multi-Output Hybrid (MiMoH) Converter for Large Conversion Ratio and Multiple Outputs
Location: W109A

Technical Lecture Presenter: Ratul Das – University of California San Diego

Point-of-Load (PoL) and Multi-Phase Converters

4:30 PM – 4:50 PM ET

T17.9 - Novel Highly Efficient Two-Stage Regulated 48V-to-12V Converter with Dual Phase 3-Level Buck Converter Featuring Natural Voltage Balancing
Location: W109A

Technical Lecture Presenter: Christian Rainer – Infineon Technologies Austria AG

Hard- and Soft-Switched

1:30 PM – 4:50 PM ET

T18 - Converters for Bidirectional Power & Renewable Energy
Location: W101

Technical Lecture Session Chair: Rolando Burgos – Virginia Tech

Technical Lecture Session Chair: Behrooz Mirafzal – Kansas State University

1:30 PM – 1:50 PM ET

T18.1 - Fault Detection Method by Utilizing Instantaneous Power Theory for Inverter-Based Distributed Generation
Location: W101

Technical Lecture Presenter: Nattapat Praisuwanna – University of Tennessee Knoxville

Distributed Energy Systems

1:50 PM – 2:10 PM ET

T18.2 - Grid-Forming Control of Single- and Two-Stage Solar PV Systems with Mode Transition
Location: W101

Technical Lecture Presenter: Lizhi Ding – Purdue University

Distributed Energy Systems

2:10 PM – 2:30 PM ET

T18.3 - An Enhanced Voltage Control Method for Multilevel-Converter-Based Electric Spring at the Distribution Voltage Level
Location: W101

Technical Lecture Presenter: Hin Sang Lam – School of Electrical and Electronic Engineering Nanyang Technology University

Distributed Energy Systems

2:30 PM – 2:50 PM ET

T18.4 - Realizing a Virtual Synchronous Generator Inverter with Overcurrent and Fault Handling Capability as Synchronous Generator
Location: W101

Technical Lecture Presenter: Haiguo Li – ABB Inc

Distributed Energy Systems

2:50 PM – 3:10 PM ET

T18.5 - Hardware Design and Implementation of a 75 kVA 3-D Integrated Intelligent Power Stage
Location: W101

Technical Lecture Presenter: Abdul Basit Mirza – Stony Brook University

Bidirectional grid interface converters

3:30 PM – 3:50 PM ET

T18.6 - Modular Series-Stacked Bidirectional AC/DC Architecture for 3-Phase Grid-Tied Applications
Location: W101

Technical Lecture Presenter: Trent Martin – University of Colorado Boulder

Bidirectional grid interface converters

3:50 PM – 4:10 PM ET

T18.7 - Design and Demonstration of an 850 V DC to 13.8 kV AC 100 kW Three-Phase Four-Wire Power Conditioning System Converter Using 10 kV SiC MOSFETs
Location: W101

Technical Lecture Presenter: Haiguo Li – ABB Inc

Bidirectional grid interface converters

4:10 PM – 4:30 PM ET

T18.8 - Performance Comparison of 10 kV and Series-Connected 3.3 kV SiC MOSFETs Based VSCs for MV Grid Interfacing Applications
Location: W101

Technical Lecture Presenter: Raj Kumar Kokkonda – North Carolina State University

Bidirectional grid interface converters

4:30 PM – 4:50 PM ET

T18.9 - Improving Transients for Droop-Controlled Inverters
Location: W101

Technical Lecture Presenter: Mahmoud Alsadat – Skoltech

SmartGrid

1:30 PM – 4:50 PM ET

T19 - Electric Aircraft Application
Location: W102

Technical Lecture Session Chair: Sheldon Williamson – Ontario Tech University

Technical Lecture Session Chair: Eddy Aeloiza – ABB US Corporate Research

1:30 PM – 1:50 PM ET

T19.1 - Design and Optimization of 2×211-kW SiC-Based Aircraft Propulsion Inverter System with High Power Density and High Efficiency
Location: W102

Technical Lecture Presenter: Xingchen Zhao – Virginia Polytechnic Institute and State University Center for Power Electronics (CPES)

Power Electronics for Aerospace

1:50 PM – 2:10 PM ET

T19.2 - 500 kW 3-Phase Interleaved SiC Switched Tank Converter for Transportation Electrification
Location: W102

Technical Lecture Presenter: Xiaoyan Liu – University of Dayton

Power Electronics for Hybrid and Electric Cars

2:10 PM – 2:30 PM ET

T19.3 - Design of a 20 kW Bidirectional Dual Active Bridge Converter for Aerospace Applications
Location: W102

Technical Lecture Presenter: Rachit Pradhan – McMaster Automotive Resource Centre

Power Electronics for Aerospace

2:30 PM – 2:50 PM ET

T19.4 - PCB Busbar Design and Verification for a Multiphase 250 kW SiC Based All-Electric Aircraft Powertrain Converter
Location: W102

Technical Lecture Presenter: Junming Liang – CPES Virginia Tech

Power Electronics for Aerospace

2:50 PM – 3:10 PM ET

T19.5 - An Enhanced Carrier-Based PWM with Reconstructed Modulation Waves for Three-Level T-Type NPC Inverters in Electric Aircraft Propulsion Applications
Location: W102

Technical Lecture Presenter: Feng Guo – University of Arkansas

Power Electronics for Aerospace

3:30 PM – 3:50 PM ET

T19.6 - Modified O-Z-Source DC Circuit Breaker for Electrical Power System Protection of Future Aircrafts
Location: W102

Technical Lecture Presenter: Aditya P – Indian Institute of Technology Dharwad

Power Electronics for Aerospace

3:50 PM – 4:10 PM ET

T19.7 - Modified Q-Z-Source DC Circuit Breaker for Next-Generation Electric Aircrafts
Location: W102

Technical Lecture Presenter: Aditya P – Indian Institute of Technology Dharwad

Power Electronics for Aerospace

4:10 PM – 4:30 PM ET

T19.8 - 1MHz, 200W, GaN-Based Cascaded Buck-LLC for Aerospace
Location: W102

Technical Lecture Presenter: Thomas Cook – University of Pittsburgh

Power Electronics for Aerospace

4:30 PM – 4:50 PM ET

T19.9 - High Power Density Flying Capacitor Multilevel Inverter for Electric Aircraft with a Stacked PCB Interleaved Hybrid Commutation Loop Design
Location: W102

Technical Lecture Presenter: Logan Horowitz – UC Berkeley

Power Electronics for Aerospace

1:30 PM – 4:50 PM ET

T20 - Control of Power Electronic Converters II
Location: W103

Technical Lecture Session Chair: Xiaonan Lu – Purdue University

Technical Lecture Session Chair: Nidhi Haryani – Onsemi

1:30 PM – 1:50 PM ET

T20.1 - Design of High-Frequency, Load-Independent Resonant Inverter Using Phase-Shift Control Method
Location: W103

Technical Lecture Presenter: Yu Zhou – University of Minnesota Twin Cities

Control of Power Electronic Converters

1:50 PM – 2:10 PM ET

T20.2 - A Multi-Segment SVM Scheme for the Capacitor Size Minimization in SiC Devices-Based Active Neutral-Point-Clamped Converters
Location: W103

Technical Lecture Presenter: Satish Belkhode, MTech – IIT Bombay

Control of Power Electronic Converters

2:10 PM – 2:30 PM ET

T20.3 - Energy Optimization Based Multi-Objective Circulating Current Control of MMC
Location: W103

Technical Lecture Presenter: Govind Avinash Reddy – Indian Institute of Technology Bombay

Control of Power Electronic Converters

2:30 PM – 2:50 PM ET

T20.4 - Hybrid Pulse Width Modulation with Current Derivative Measurement for PMSM Sensorless Control
Location: W103

Technical Lecture Presenter: Juwon Lee – Seoul National University

Sensor and Sensor-less Control

2:50 PM – 3:10 PM ET

T20.5 - Passivity-Based Co-Design of Active Damping and Voltage Controller for Converter-Based Grid Emulator
Location: W103

Technical Lecture Presenter: Zejie Li, PhD – Department of Energy Aalborg University

Control of Power Electronic Converters

3:30 PM – 3:50 PM ET

T20.6 - Novel Control for Active Power Compensation Using DSCC-MMC Based ES-STATCOM
Location: W103

Technical Lecture Presenter: Harshit Nath – FREEDM Systems Center North Carolina State University

Control of Power Electronic Converters

3:50 PM – 4:10 PM ET

T20.7 - Controller Verification of a Smart-Grid Compatible 200kHz Single-Stage Photovoltaic Microinverter
Location: W103

Technical Lecture Presenter: Arafat Hasnain – University of Maryland

Control of Power Electronic Converters

4:10 PM – 4:30 PM ET

T20.8 - Limited States Multi-Objective Direct Model Predictive Control of a Grid-Tied 3L-Active Neutral-Point Clamped Converter with an LCL Filter
Location: W103

Technical Lecture Presenter: Waqar A. Khan – Marquette University

Control of Power Electronic Converters

4:30 PM – 4:50 PM ET

T20.9 - Phase Shifted Power Control Strategy for Efficiency Improvement at Medium Power Region in Induction Cooktops Using Full-Bridge Series-Resonant Inverters
Location: W103

Technical Lecture Presenter: Yun Seong Hwang – Sungkyunkwan University

Control of Power Electronic Converters

1:30 PM – 4:50 PM ET

T21 - Reliability & Thermal Performance of Power Modules
Location: W104

Technical Lecture Session Chair: Chunmeng Xu – ABB

Technical Lecture Session Chair: Jim Marinos – Payton Planar

1:30 PM – 1:50 PM ET

T21.1 - Power Module Thermal Characterization Considering Aging Towards Online State-of-Health Monitoring
Location: W104

Technical Lecture Presenter: Animesh Kundu Anik – University of Windsor

Quality and System Reliability

1:50 PM – 2:10 PM ET

T21.2 - Thermal Characteristics of Liquid Metal Interconnects for Power Semiconductors
Location: W104

Technical Lecture Presenter: Zhongchao Sun – Aalborg University

Power Electronics Packaging

2:10 PM – 2:30 PM ET

T21.3 - Electrothermal Modeling Based Digital Twin Method for Degradation Parameters Identification of DC-DC Converter
Location: W104

Technical Lecture Presenter: Chuangchuang Lu – Nanjing University of Aeronautics and Astronautics

Quality and System Reliability

2:30 PM – 2:50 PM ET

T21.4 - Sliding Window-Based Thermal Topography Determining Thermal Impedance and Thermal Coupling
Location: W104

Technical Lecture Presenter: Shamar Christian – University of Arkansas

Thermal and EMC Management

2:50 PM – 3:10 PM ET

T21.5 - Thermal Stress Reliability Comparison of WB and POL-kW Structure by Power Cycling and Simulation
Location: W104

Technical Lecture Presenter: Youichi Nishihara – Shinko Electric Industries Co.,Ltd.

Power Electronics Packaging

3:30 PM – 3:50 PM ET

T21.6 - A Comprehensive Comparison of EFT, RF, and Lightning Susceptibility Tests in DO-160G and MIL-STD-461G
Location: W104

Technical Lecture Presenter: Han Wu – University of Florida

Thermal and EMC Management

3:50 PM – 4:10 PM ET

T21.7 - Study on Thermal Stress Behavior of Mold Type POL Tile
Location: W104

Technical Lecture Presenter: Kei Murayama – Shinko Electric Industries Co. Ltd.

Power Electronics Packaging

4:10 PM – 4:30 PM ET

T21.8 - Gradient-Based End-of-Life Criterion of Power Semiconductor Modules
Location: W104

Technical Lecture Presenter: Yichi Zhang – Aalborg University

Quality and System Reliability

4:30 PM – 4:50 PM ET

T21.9 - Lifetime Prediction in Power Semiconductor Devices: A Comparative Study Between Analytical Modeling and Artificial Neural Network
Location: W104

Technical Lecture Presenter: Alessandro Vaccaro, PhD – University of Padova

Quality and System Reliability

1:30 PM – 4:50 PM ET

T22 - Digital Controllers & Control ICs
Location: W105

Technical Lecture Session Chair: Kang Wei – Texas Instruments

Technical Lecture Session Chair: Seungdeog Choi – Mississippi State University

1:30 PM – 1:50 PM ET

T22.1 - Integrated Delay-Line Based High-Resolution PFM-PWM Modulator
Location: W105

Technical Lecture Presenter: Tom Urkin – PEMIC center - Ben Gurion University of the Negev

MCUs, DSPs, FPGAs, ASICs

1:50 PM – 2:10 PM ET

T22.2 - Digital Sliding-Mode-Based xy-Current Suppression in Dual Three-Phase PMSM Drives
Location: W105

Technical Lecture Presenter: Fengyang Sun – McMaster University

Speaker: Subarni Pradhan

Digital Control

2:10 PM – 2:30 PM ET

T22.3 - Estimator-Based Step-Load Transient Improvements in a Digitally Controlled Synchronous Buck Converter
Location: W105

Technical Lecture Presenter: Chandan Suthar – University of Colorado Boulder

Digital Control

2:30 PM – 2:50 PM ET

T22.4 - An Improvement of Surge Voltage and Efficiency in Three-Phase Inverter by Using Fully Digital Active Gate Control
Location: W105

Technical Lecture Presenter: Van-Long Pham – Yokohama National University

Gate Drive Circuits

2:50 PM – 3:10 PM ET

T22.5 - Closed-Loop Stability Analysis of Digitally Current Mode Controlled Three-Level Buck Converter Using a Simplified Discrete-Time Modeling Framework
Location: W105

Technical Lecture Presenter: Chandan Suthar – University of Colorado Boulder

Digital Control

3:30 PM – 3:50 PM ET

T22.6 - A 155W −95.6 dB THD+N GaN-Based Class-D Audio Amplifier with LC Filter Nonlinearity Compensation
Location: W105

Technical Lecture Presenter: Qinwen Fan – Delft University

Control ICs

3:50 PM – 4:10 PM ET

T22.7 - A Monolithic 30uA – 1.5A > 85%-Efficiency, Passive-Ramp-Extended-Ton Controlled Buck Converter for Mobile SoC Fast DVS
Location: W105

Technical Lecture Presenter: Hsaio-Hsuan Chen – National Taiwan University

Control ICs

4:10 PM – 4:30 PM ET

T22.8 - Autotuning of Resonant Switched-Capacitor Converters for Zero Current Switching and Terminal Capacitance Reduction
Location: W105

Technical Lecture Presenter: Haifah Boureima H Sambo – University of California Berkeley

Control of Power Electronic Converters

4:30 PM – 4:50 PM ET

T22.9 - Digital Gate Driver IC with Fully Integrated Automatic Timing Control Function in Stop-and-Go Gate Drive for IGBTs
Location: W105

Technical Lecture Presenter: Dibo Zhang – The University of Tokyo

Gate Drive Circuits

1:30 PM – 4:50 PM ET

T23 - Single-Phase AC-DC Converters
Location: W109B

Technical Lecture Session Chair: John Lam – York University

Technical Lecture Session Chair: Jin Moon – Florida State

1:30 PM – 1:50 PM ET

T23.1 - Hybrid Fixed/Variable Frequency TCM Average Current Control Method Enabling ZVS MHz Operation of GaN HEMTs in PFC Stages
Location: W109B

Technical Lecture Presenter: Matthias Joachim Kasper – Infineon Technologies Austria AG

Power Factor Correction, CCM, DCM, CRM/BCM Control, Bridgeless

1:50 PM – 2:10 PM ET

T23.2 - A Novel Transformer Leakage Energy Recovery Active Clamp Control Technique for High Power AC/DC Flyback Converters
Location: W109B

Technical Lecture Presenter: Raj Kumar Kokkonda – North Carolina State University

Single-Phase and Three-Phase Input

2:10 PM – 2:30 PM ET

T23.3 - The Design Methodology of High-Power-Density Adapter Based on Flying Capacitor Converter and Series Power Decoupling Topology for PD3.1 Application
Location: W109B

Technical Lecture Presenter: Yu Qi – silergy

External AC-DC Adapters

2:30 PM – 2:50 PM ET

T23.4 - An Ultra-High Efficiency High Power Density 140W PD3.1 AC-DC Adapter Using GaN Power ICs
Location: W109B

Technical Lecture Presenter: Xiucheng Huang – Navitas Semiconductor

External AC-DC Adapters

2:50 PM – 3:10 PM ET

T23.5 - Hybrid-Flyback and GaN Enable Ultra-High Power Density 240W USB-PD EPR Adaptor
Location: W109B

Technical Lecture Presenter: Alfredo Medina-Garcia – Infineon Technologies AG

Embedded AC-DC Power Supplies

3:30 PM – 3:50 PM ET

T23.6 - Control Strategies of Active Power Decoupling Integrated Active Clamp Flyback Converter
Location: W109B

Technical Lecture Presenter: Lei Wang – The University of Sydney

Single-Phase and Three-Phase Input

3:50 PM – 4:10 PM ET

T23.7 - Active Ripple Energy Storage Circuit with Extended Hold-Up Time Capability and Minimum Capacitance for High Power Dense Rectifiers
Location: W109B

Technical Lecture Presenter: Alessandro Pevere, PhD – Infineon Technologies

Power Factor Correction, CCM, DCM, CRM/BCM Control, Bridgeless

4:10 PM – 4:30 PM ET

T23.8 - An Auxiliary Circuit with a Flexible LC Resonant Tank for High-Efficiency and Low-Cost Totem-Pole Boost Bridgeless Power-Factor Correction Converter
Location: W109B

Technical Lecture Presenter: Shaun Thurber – University of Rhode Island

Power Factor Correction, CCM, DCM, CRM/BCM Control, Bridgeless

4:30 PM – 4:50 PM ET

T23.9 - Ultra-Functional Novel Circuit for Electric Vehicle Charging Solutions Based on a Floating Active Filter Connected to the High-Frequency Link
Location: W109B

Technical Lecture Presenter: Itziar Alzuguren – Ikerlan Technology Research Centre

Bidirectional AC/DC converters

1:30 PM – 4:50 PM ET

T24 - Power Converter Control & Stability Analysis
Location: W108

Technical Lecture Session Chair: Justin Henspeter, MSEE – IBM

Technical Lecture Session Chair: Joseph Song-Manguelle, PhD – Oak Ridge National Laboratory

1:30 PM – 1:50 PM ET

T24.1 - Loop Gain Modeling of a Single-Phase PFC for Online Small-Signal Stability Monitoring
Location: W108

Technical Lecture Presenter: Qing Lin – CPES Virginia Tech

Circuits and Systems

1:50 PM – 2:10 PM ET

T24.2 - Average and Small-Signal Model of the Four-Switch Buck-Boost Converter Under Both Duty-Cycle and Phase-Shift Modulation
Location: W108

Technical Lecture Presenter: Ezio Gallo – Università degli Studi di Padova

Circuits and Systems

2:10 PM – 2:30 PM ET

T24.3 - Analysis and Modeling of a Four-Switch Buck-Boost Converter with PWM Plus Phase-Shift Control
Location: W108

Technical Lecture Presenter: Lingxuan Xiao – Nanjing University of Aeronautics and Astronautics

Circuits and Systems

2:30 PM – 2:50 PM ET

T24.4 - Analytical Modelling and Optimization of DC-Link Voltage Harmonic Spectra of Full-Bridge Modular Multilevel Converters for Buck and Boost Operation
Location: W108

Technical Lecture Presenter: Thabet Alzahrani – University of Sheffield

Circuits and Systems

2:50 PM – 3:10 PM ET

T24.5 - Auxiliary Power Supply Startup Evaluation and Improvement of the Input-Series System with Small Submodule Capacitances
Location: W108

Technical Lecture Presenter: Rui Wang – Aalborg University

Circuits and Systems

3:30 PM – 3:50 PM ET

T24.6 - Equivalent DQ Sequence-Domain Model of Unbalanced Three-Phase Passive Elements for Power Converter Controllers
Location: W108

Technical Lecture Presenter: Airan Francés Roger – CEI, Universidad Politécnica de Madrid

Circuits and Systems

3:50 PM – 4:10 PM ET

T24.7 - Impact of Machine-Side Converter Dynamics on AC Impedance of Grid-Forming PMSG Wind Turbines
Location: W108

Technical Lecture Presenter: Shiyi Liu – Aalborg University and DNV

Circuits and Systems

4:10 PM – 4:30 PM ET

T24.8 - FPGA Model of Multi-Active-Bridge-Based Cascaded Solid-State Transformer for Real-Time HIL Tests
Location: W108

Technical Lecture Presenter: Hossein Chalangar – OPAL-RTOPAL-RT TECHNOLOGIES

Rapid Prototyping

4:30 PM – 4:50 PM ET

T24.9 - Demagnetization Modeling and Analysis for MTPA-Driven Permanent Magnet Motors with Distributed Lap Windings
Location: W108

Technical Lecture Presenter: Jinqiu Gao – Central South University

Device and Component Modeling

3:10 PM – 3:30 PM ET

Break
Location: Outside of Technical & Industry Session Rooms

Speaker: APEC 2023

4:30 PM – 5:30 PM ET

PELS Conferences Committee Appriciation Reception
Location: Rosen Centre Salon 17

7:00 PM – 9:00 PM ET

Social Event (Shuttles to Event 5:00pm - 9:00pm)
Location: Disney Hollywood Studios

Speaker: APEC 2023

7:00 AM – 2:00 PM ET

Speaker Ready Room Open Thursday
Location: W107

Speaker: APEC 2023

8:00 AM – 12:00 PM ET

Registration Open Thursday
Location: West A Lobby

Speaker: APEC 2023

8:30 AM – 9:00 AM ET

PELS Technical Operations Committee Breakfast
Location: Rosen Centre Salon 17

8:30 AM – 11:20 AM ET

PSMA Sponsored Industry Session: Energy Storage IS24
Location: Convention Center, W205BC

8:30 AM – 11:20 AM ET

T25 - Bi-directional DC-DC Converters
Location: W101

Technical Lecture Session Chair: Justin Henspeter, MSEE – IBM

Technical Lecture Session Chair: Cahit Gezgin, PhD – Infineon Technologies AG

8:30 AM – 8:50 AM ET

T25.1 - Asymmetric Resonant Tank Design for a Bidirectional CLLC Resonant Converter in G2V and V2G Operation
Location: W101

Technical Lecture Presenter: Stefan Ditze – Fraunhofer IISB

Bidirectional dc/dc converters

8:50 AM – 9:10 AM ET

T25.2 - Sensor-Reduction Control for SPS-Modulated DAB Converter Using Ultra-Local Model
Location: W101

Technical Lecture Presenter: Tan-Quoc Duong – University of Ulsan

Bidirectional dc/dc converters

9:10 AM – 9:30 AM ET

T25.3 - Operation and Comparison of a Novel Modular Asymmetric Buck-Boost DC-DC Converter for High-Power Applications
Location: W101

Technical Lecture Presenter: Soumya Nag – Indian Institute of Technology

Bidirectional dc/dc converters

9:30 AM – 9:50 AM ET

T25.4 - Data-Driven Modeling of Zero Voltage Switching of Non-Resonant DAB Converters Under TPS Modulation
Location: W101

Technical Lecture Presenter: Xinze Li – Nanyang Technological University

Bidirectional dc/dc converters

9:50 AM – 10:10 AM ET

T25.5 - Stacked-Bridge-Based Three-Level DAB Converter in 800V DC Micro-Grids
Location: W101

Technical Lecture Presenter: Haoyu Zhang – ShanghaiTech University

Bidirectional dc/dc converters

10:40 AM – 11:00 AM ET

T25.6 - A Communication-Integrated Battery Equalization Strategy Based on Bidirectional Flyback Converters
Location: W101

Technical Lecture Presenter: Lingyu Li – College of Electrical Engineering Zhejiang University

Bidirectional dc/dc converters

11:00 AM – 11:20 AM ET

T25.7 - Single Current Measurement Based Bidirectional Frequency Tracking for Unregulated Series Resonant DAB Converters
Location: W101

Technical Lecture Presenter: Liyang Du – University of Arkansas

Bidirectional dc/dc converters

8:30 AM – 11:20 AM ET

T26 - Motors Drives
Location: W102

Technical Lecture Session Chair: Rakib Islam – American Axle & Manufacturing

Technical Lecture Session Chair: Woongkul Lee – Michigan State University

8:30 AM – 8:50 AM ET

T26.1 - Saliency-Based Sensorless IPMSM Drives Using Derivatives of Phase Currents with Single DC-Link Current Sensor
Location: W102

Technical Lecture Presenter: Byung Ryang Park – Seoul national university

AC, DC, BLDC Motor Drives

8:50 AM – 9:10 AM ET

T26.2 - Design of High-Efficiency Ultra-High-Speed Motor for Fuel-Cell Air Compressor Using an Amorphous Stator with Multiphase Winding
Location: W102

Technical Lecture Presenter: Khurshedul Islam – Mississippi State University

AC, DC, BLDC Motor Drives

9:10 AM – 9:30 AM ET

T26.3 - Evaluation and Efficiency Comparison of Soft-Switching ARCP SiC-Based Traction Inverters in Electric Vehicles
Location: W102

Technical Lecture Presenter: Che-Wei Chang – Virginia Polytechnic Institute and State University

AC, DC, BLDC Motor Drives

9:30 AM – 9:50 AM ET

T26.4 - Design and Optimization of a Modular Multiphase Drive for Multiphase Machines
Location: W102

Technical Lecture Presenter: Yuxuan Wu – Stony Brook University

Single- and Multi-Phase Inverters

9:50 AM – 10:10 AM ET

T26.5 - Smart Coils for Mitigation of Motor Reflected Overvoltage Fed by SiC Drives
Location: W102

Technical Lecture Presenter: Majid Tahmasbi Fard – University of Kentucky

High Performance Drives

10:40 AM – 11:00 AM ET

T26.6 - Self-Calibration Technique for Junction Temperature Estimation of SiC MOSFET Inverters Loaded with Synchronous Reluctance Motors
Location: W102

Technical Lecture Presenter: Paolo Pescetto – Politecnico di Torino

Sensor Integration

11:00 AM – 11:20 AM ET

T26.7 - A Multi-Kilowatt Low-Profile GaN Inverter for Light Electric Vehicles and High-Power Tools
Location: W102

Technical Lecture Presenter: Martin Wattenberg – Infineon Technologies Austria AG

AC, DC, BLDC Motor Drives

8:30 AM – 11:20 AM ET

T27 - Power Converter Modulation & Control
Location: W103

Technical Lecture Session Chair: Qingxuan Ma – GaN Systems

Technical Lecture Session Chair: Jingbo Liu – Eaton

8:30 AM – 8:50 AM ET

T27.1 - A Robust Voltage Sensor-Less Control for SiC Grid-Tied Inverter with Zero-Voltage Ride-Through
Location: W103

Technical Lecture Presenter: Xiaofeng Dong – Florida State University

Grid-Tied Systems

8:50 AM – 9:10 AM ET

T27.2 - Non-Isolated High Voltage Conversion Ratio Soft-Switched Interleaved Bidirectional DC-DC Converter with Low Voltage Stress on Switches
Location: W103

Technical Lecture Presenter: Zahra Saadatizadeh – University of Arkansas

Bi-directional Power Converters

9:10 AM – 9:30 AM ET

T27.3 - Design and Control of Three-Phase Smart Inverter Using Gate-Drive Integrated Gallium Nitride (GaN) Devices for Solar Energy Integration
Location: W103

Technical Lecture Presenter: Tucker Skinner – Utah State University

Photovoltaic (PV) Inverters and Micro Inverters

9:30 AM – 9:50 AM ET

T27.4 - A Comprehensive Control Scheme for CM Resonance Suppression and Current Quality Improvement with DPWM Method in ILCL-Filtered Grid-Connected Inverter
Location: W103

Technical Lecture Presenter: Huizhong Sun – Aalborg University

Photovoltaic (PV) Inverters and Micro Inverters

9:50 AM – 10:10 AM ET

T27.5 - Autonomous Control Schemes for Grid-Interfaced Series-Connected Low-Voltage Isolated PV Microinverter
Location: W103

Technical Lecture Presenter: Subhrasish Pal – Indian Institute of Technology Kharagpur

Photovoltaic (PV) Inverters and Micro Inverters

10:40 AM – 11:00 AM ET

T27.6 - Optimal Modulation and DM Filter Design for a High Switching Frequency Single-Stage Microinverter
Location: W103

Technical Lecture Presenter: Arafat Hasnain – University of Maryland

Photovoltaic (PV) Inverters and Micro Inverters

11:00 AM – 11:20 AM ET

T27.7 - On the Fault-Ride-Through Dynamics of Grid-Forming Converters — a Multi-Dimensional Adaptive Inertia Approach
Location: W103

Technical Lecture Presenter: Pranjal Gajare – Georgia Tech

Grid-Tied Systems

8:30 AM – 11:20 AM ET

T28 - Solid-State Transformers
Location: W104

Technical Lecture Session Chair: Maja Harfman Todorovic – Menlo Microsystems

Technical Lecture Session Chair: Mohammed Agamy – University at Albany

8:30 AM – 8:50 AM ET

T28.1 - Second Harmonic Ripple Voltage Suppression for Single-Phase ISOP Solid-State Transformer by Active Power Decoupling
Location: W104

Technical Lecture Presenter: Tianyu Wei – Power Electronics Laboratory EPFL

Solid-State Transformers

8:50 AM – 9:10 AM ET

T28.2 - A Single-Stage Three-Phase Isolated AC-DC Converter for Medium Voltage Solid State Transformer Applications
Location: W104

Technical Lecture Presenter: Chi Zhang – Delta Electronics (Americas) Ltd.

Solid-State Transformers

9:10 AM – 9:30 AM ET

T28.3 - Square-Wave Source with Adjustable dv/dt for Insulation Testing Under Mixed-Frequency Stresses
Location: W104

Technical Lecture Presenter: Hajime Takayama – Kyoto University

Solid-State Transformers

9:30 AM – 9:50 AM ET

T28.4 - 7.2kV/100kVA Solid State Transformer Based on Half Bridge LLC Resonant Converter and 15kV SiC AC Switch
Location: W104

Technical Lecture Presenter: Wei Xu – The University of Texas at Austin

Solid-State Transformers

9:50 AM – 10:10 AM ET

T28.5 - Magnetic Design of a 4.16 kV/1 MW Medium Voltage PV Plus Storage Solid State Transformer (PVS-SST)
Location: W104

Technical Lecture Presenter: Zhicheng Guo – UT Austin

Solid-State Transformers

10:40 AM – 11:00 AM ET

T28.6 - Medium Voltage Solid State Transformer for Extreme Fast Charging Applications
Location: W104

Technical Lecture Presenter: M A Awal, PhD – Danfoss

Solid-State Transformers

11:00 AM – 11:20 AM ET

T28.7 - A High-Frequency PCB-Winding Transformer Design with Medium Voltage Insulation for Solid-State Transformer
Location: W104

Technical Lecture Presenter: Zheqing Li – CPES, Virginia Polytechnic Institute and State University

Solid-State Transformers

8:30 AM – 11:20 AM ET

T29 - Magnetics Modeling & Simulation
Location: W105

Technical Lecture Session Chair: Matt Wilkowski – EnaChip

Technical Lecture Session Chair: George Slama – Würth Elektronik

8:30 AM – 8:50 AM ET

T29.1 - Predicting the B-H Loops of Power Magnetics with Transformer-Based Encoder-Projector-Decoder Neural Network Architecture
Location: W105

Technical Lecture Presenter: Haoran Li – Princeton University

Magnetics modeling and simulations

8:50 AM – 9:10 AM ET

T29.2 - Current Sharing Analysis of a High Power Transformer with Parallel Windings
Location: W105

Technical Lecture Presenter: Tianlong Yuan – CPEC Virginia Tech

Magnetics modeling and simulations

9:10 AM – 9:30 AM ET

T29.3 - An Alternative Method to Accurately Model Magnetic Components Using Ansys HFSS 3D
Location: W105

Technical Lecture Presenter: Amin Khakparvaryazdi, PhD – University of Alberta

Magnetics modeling and simulations

9:30 AM – 9:50 AM ET

T29.4 - A Simplified DC-Bias Injection Method with Mirror Transformer for Magnetic Material Characterization
Location: W105

Technical Lecture Presenter: Shukai Wang – Princeton University

Magnetics modeling and simulations

9:50 AM – 10:10 AM ET

T29.5 - Transformer Leakage Inductance Design Methodology
Location: W105

Technical Lecture Presenter: Angshuman Sharma – Missouri University of Science and Technology

Magnetics modeling and simulations

10:40 AM – 11:00 AM ET

T29.6 - Design Guidelines to Reduce Parasitic Capacitance in Planar Inductors
Location: W105

Technical Lecture Presenter: Shaokang Luan – Aalborg University

Magnetics modeling and simulations

11:00 AM – 11:20 AM ET

T29.7 - Calculation of Ferrite Core Losses with Arbitrary Waveforms Using the Composite Waveform Hypothesis
Location: W105

Technical Lecture Presenter: Thomas Guillod – Dartmouth College

Magnetics modeling and simulations

8:30 AM – 11:20 AM ET

T30 - Practical Design Considerations for Power Modules
Location: W108

Technical Lecture Session Chair: Ran Mo – Shell

Technical Lecture Session Chair: Satarupa Bal – Eaton

8:30 AM – 8:50 AM ET

T30.1 - Layout-Dominated Electro-Thermal Optimization for Multichip Power Modules with Response Surface and Fourier Series Model
Location: W108

Technical Lecture Presenter: Yu Chen – Zhejiang University

Power Electronics Packaging

8:50 AM – 9:10 AM ET

T30.2 - Experimental Evaluation of Liquid Immersed Electronics for High Density Power Converters
Location: W108

Technical Lecture Presenter: Jamie Turnbull – UW-Madison

Power Electronics Packaging

9:10 AM – 9:30 AM ET

T30.3 - Modular Scalable Power Electronics Building Block Based MVDC Solid State Circuit Breakers
Location: W108

Technical Lecture Presenter: Shuyan Zhao – Drexel University

Quality and System Reliability

9:30 AM – 9:50 AM ET

T30.4 - Proactive Thyristor-Based DC Solid-State Circuit Breaker
Location: W108

Technical Lecture Presenter: Reza Kheirollahi – Drexel University

Quality and System Reliability

9:50 AM – 10:10 AM ET

T30.5 - Package Design of a Double-Side Cooled 20-kV Gallium Nitride Diode Module with Improved Insulation by Nonlinear Resistive Polymer-Nanoparticle Coating
Location: W108

Technical Lecture Presenter: Zichen Zhang – Virginia Tech

Power Modules / High Density Design

10:40 AM – 11:00 AM ET

T30.6 - A 2x2 Paralleling GaN Half-Bridge Power Module for High-Density 500kHz 3.3kW CLLC Converter
Location: W108

Technical Lecture Presenter: Satoshi Otsu – Panasonic Industry Co Ltd

Power Modules / High Density Design

11:00 AM – 11:20 AM ET

T30.7 - A Simple and Non-Destructive Method to Measure Per-Terminal Baseplate Coupling of Power Modules
Location: W108

Technical Lecture Presenter: Brian Deboi – Wolfspeed

Thermal and EMC Management

8:30 AM – 11:20 AM ET

T31 - Wireless Power Transfer II
Location: W109A

Technical Lecture Session Chair: Khurram Afridi, PhD – Cornell University

Technical Lecture Session Chair: Shajjad Chowdhury – Oak Ridge National Lab

8:30 AM – 8:50 AM ET

T31.1 - Current Controlled Transmitter for High Frequency WPT Utilizing Non-Invasive PCB Integrated Rogowski Current Sensor
Location: W109A

Technical Lecture Presenter: Bar Halivni, M.Sc. – Ben-Gurion University of the Negev - PEMIC

Wireless charging

8:50 AM – 9:10 AM ET

T31.2 - State Estimation Based Foreign Object Detection in Wireless Power Transfer Systems
Location: W109A

Technical Lecture Presenter: Kang Yue, MA – ShanghaiTech University

Wireless charging

9:10 AM – 9:30 AM ET

T31.3 - A Fast-Speed Phase Adaptation Algorithm Based on Power Feedback for Microwave Power Transmission
Location: W109A

Technical Lecture Presenter: Doumin Zhou – Nanjing University of Aeronautics and Astronautics

Wireless charging

9:30 AM – 9:50 AM ET

T31.4 - A Planar Omnidirectional Wireless Power Transfer Platform for Portable Devices
Location: W109A

Technical Lecture Presenter: Xipei Yu – Center for Power Electronics Systems

Wireless charging

9:50 AM – 10:10 AM ET

T31.5 - Ultra-Wideband Unidirectional Reset-Less Rogowski Coil Switch Current Sensor Topology for High-Frequency DC-DC Power Converters
Location: W109A

Technical Lecture Presenter: Ali Parsa Sirat – University of North Carolina at Charlotte

Non-contact Sensors for Power Electronics

10:40 AM – 11:00 AM ET

T31.6 - A Compact Anisotropic Magnetoresistance Based Contactless Current Sensor for Medium Voltage Power Electronics Applications
Location: W109A

Technical Lecture Presenter: Lakshmi Ravi – Virginia Polytechnic Institute and State University

Non-contact Sensors for Power Electronics

11:00 AM – 11:20 AM ET

T31.7 - A Novel Metal Object Detection System Using Asymmetric Triangular Gradiometers for High-Power Inductive Power Transfer Applications
Location: W109A

Technical Lecture Presenter: Jin S. Choi – Samsung Electronics

Non-contact Sensors for Power Electronics

8:30 AM – 11:20 AM ET

T32 - Fast Charging Applications
Location: W109B

Technical Lecture Session Chair: Dong Cao, PhD – University of Dayton

Technical Lecture Session Chair: Anup Anurag – Delta Electronics Americas

8:30 AM – 8:50 AM ET

T32.1 - Active Power Decoupling Strategy for Single Phase AC Charging Using a Dual Inverter Drive
Location: W109B

Technical Lecture Presenter: Chatumal Perera – University of Toronto

Charging Systems

8:50 AM – 9:10 AM ET

T32.2 - Scalable GaN-Based EV Charging Station with Energy Storage
Location: W109B

Technical Lecture Presenter: Mohamed Tamasas Elrais – University of Central Florida

Charging Systems

9:10 AM – 9:30 AM ET

T32.3 - A 3.3 kV Silicon Carbide MOSFET Based Building Block for Medium-Voltage Ultra-Fast DC Chargers
Location: W109B

Technical Lecture Presenter: Ahmed Ismail – University of Arkansas

Charging Systems

9:30 AM – 9:50 AM ET

T32.4 - Event-Based Spread Spectrum Voltage and Current Mode Digital PFM Controllers in LLC Converters
Location: W109B

Technical Lecture Presenter: Santanu Kapat, PhD – Indian Institute of Technology (IIT) Kharagpur

Vehicular Power Electronic Circuits and Systems

9:50 AM – 10:10 AM ET

T32.5 - High Power Factor Correction of a Single Stage Bidirectional Wireless Battery Charger for EV
Location: W109B

Technical Lecture Presenter: Asier Garcia-Bediaga – IKERLAN

Charging Systems

10:40 AM – 11:00 AM ET

T32.6 - An 18 kW Battery Charger Module for Extreme Fast Charging Applications Using an Unfolding-Based AC-DC Topology
Location: W109B

Technical Lecture Presenter: Shubhangi Gurudiwan – Utah State University

Charging Systems

11:00 AM – 11:20 AM ET

T32.7 - Individual Module Power Transmission Control for Extreme Fast Charging Stations Configured with Solid-State Transformer
Location: W109B

Technical Lecture Presenter: Dong-Ho Choi – Dankook University

Charging Systems

8:30 AM – 11:20 AM ET

IS19 - WBG Applications
Location: W206

Industry Session Chair: Peter Di Maso – Cambridge GaN Devices

Industry Session Chair: Reza Sharifi – Texas Instruments

8:30 AM – 8:55 AM ET

IS19.1 - A SiC Based 60kW Three Phases LLC Converter with Wide Voltage Range
Location: W206

Industry Session Presenter: Chen Wei – Wolfspeed

WBG Applications

8:55 AM – 9:20 AM ET

IS19.2 - Maximize Performance of Silicon Carbide MOSFETs for High Power Conversions
Location: W206

Industry Session Presenter: Yuequan Hu, PhD – Wolfspeed

WBG Applications

9:20 AM – 9:45 AM ET

IS19.3 - 2.4kW All-GaN 48V-12V Bidirectional Converter with Bi-GaN Load Switch for Mild Hybrid Electrical Vehicle (MHEV)
Location: W206

Industry Session Presenter: Shuilin Tian – Innoscience America INC

WBG Applications

9:45 AM – 10:10 AM ET

IS19.4 - New GaNSense Half-Bridge IC Enables Next Gen High-Frequency, High-Efficiency, High-Density Topologies
Location: W206

Industry Session Presenter: Tom Ribarich – Navitas Semiconductor

WBG Applications

10:30 AM – 10:55 AM ET

IS19.5 - Hybrid SiC and GaN Implementation of a Totem Pole PFC
Location: W206

Industry Session Presenter: Sam Abdel-Rahman – Infineon Technologies

WBG Applications

10:55 AM – 11:20 AM ET

IS19.6 - High Efficiency and High-Power Density GaN-Based 11kW/800V Onboard Charger
Location: W206

Industry Session Presenter: Qingxuan Ma – GaN Systems

WBG Applications

8:30 AM – 11:20 AM ET

IS20 - Packaging and Thermal Management
Location: W203ABC

Industry Session Chair: Douglas C. Hopkins, PhD – North Carolina State University

Industry Session Chair: Ratul Das – University of California San Diego

8:30 AM – 8:55 AM ET

IS20.1 - Assessment of MOSFET Switching Losses Based on Junction Temperature: Comparison in an LLC Converter Between TO-247 and ACEPACK™ SMIT Using MDmesh™ DM6 Technology
Location: W203ABC

Industry Session Presenter: Alfio Scuto – STMicroelectronics

Packaging and Thermal Management

8:55 AM – 9:20 AM ET

IS20.2 - Maximize Performances and Power Density in AC-DC Power Conversion by Using SMD Packages with Top-Side Cooling
Location: W203ABC

Industry Session Presenter: Ludovica Longo – STMicroelectronics

Packaging and Thermal Management

9:20 AM – 9:45 AM ET

IS20.3 - Robust, Flexible Copper Interconnections to Enhance Performance and Reliability of SiC Power Modules for Traction Inverters
Location: W203ABC

Industry Session Presenter: Brandon Passmore – Wolfspeed

Packaging and Thermal Management

9:45 AM – 10:10 AM ET

IS20.4 - Thermal Management for Bottom-Side Cooled Surface-Mount SiC Devices
Location: W203ABC

Industry Session Presenter: Tamanna Bhatia, MS – Wolfspeed

Packaging and Thermal Management

10:30 AM – 10:55 AM ET

IS20.5 - Inverter/Converter Power Density and Flexibility Improvements Through Modularity and Novel Thermal Management Architecture
Location: W203ABC

Industry Session Presenter: Ian Byers – Marel Power Solutions

Packaging and Thermal Management

10:55 AM – 11:20 AM ET

IS20.6 - GaN Transistor for Next Generation Power Supply Units
Location: W203ABC

Industry Session Presenter: Bo Sheng – GaN Systems Inc.

Packaging and Thermal Management

8:30 AM – 11:20 AM ET

IS21 - PMBus and Security in Power Supplies with Digital Communication
Location: W202BC

Industry Session Chair: Richard Nowakowski – Texas Instruments

Industry Session Chair: Peter Miller – Texas Instruments

8:30 AM – 8:55 AM ET

IS21.1 - What is new in PMBus™ 1.4 Part I & Part II
Location: W202BC

Industry Session Presenter: Bob White – Embedded Power Labs

PMBus and Security in Power Supplies with Digital Communication

8:55 AM – 9:20 AM ET

IS21.2 - AVSBus™ Serial Interface for Dynamic Voltage Scaling – Evolution
Location: W202BC

Industry Session Presenter: Juan Arango – Texas Instruments

PMBus and Security in Power Supplies with Digital Communication

9:20 AM – 9:45 AM ET

IS21.3 - Secure PMBus controller to add security protection to PMBus-based devices
Location: W202BC

Industry Session Presenter: Clay Greene – Analog Devices Inc

PMBus and Security in Power Supplies with Digital Communication

9:45 AM – 10:10 AM ET

IS21.4 - Firmware Authentication Techniques for Front-End Power supplies and Environment Monitors
Location: W202BC

Industry Session Presenter: Srini Kothapally – Cisco Systems

PMBus and Security in Power Supplies with Digital Communication

10:30 AM – 10:55 AM ET

IS21.5 - Implementing Digital Power Supply Security with PMBus 1.5
Location: W202BC

Industry Session Presenter: Robert Santucci – Intel Corporation

PMBus and Security in Power Supplies with Digital Communication

10:55 AM – 11:20 AM ET

IS21.6 - Looking Forward – PMBus™ 2.0
Location: W202BC

Industry Session Presenter: Peter Miller – System Management Interface Forum

PMBus and Security in Power Supplies with Digital Communication

8:30 AM – 11:20 AM ET

IS22 - Flyback Converters for Low Power Applications
Location: W204ABC

Industry Session Chair: Armando Mesa – onsemi

Industry Session Chair: Elisabetta Mahmutovic – Texas Instruments

8:30 AM – 8:55 AM ET

IS22.1 - How to Achieve Low Standby Power for an Isolated offline Flyback
Location: W204ABC

Industry Session Presenter: Roberto Scibilia – TEXAS INSTRUMENTS

Flyback Converters for Low Power Applications

8:55 AM – 9:20 AM ET

IS22.2 - Under the Hood of an Isolated Flyback Compensation with TL431 Voltage Reference
Location: W204ABC

Industry Session Presenter: Elisabetta Mahmutovic – Texas Instruments

Flyback Converters for Low Power Applications

9:20 AM – 9:45 AM ET

IS22.3 - High Efficiency and High-Power Density 35W USB-PD Adapter Using Asymmetrical Half-Bridge Flyback and GaN Device
Location: W204ABC

Industry Session Presenter: Allan Saliva – Infineon Technologies

Flyback Converters for Low Power Applications

9:45 AM – 10:10 AM ET

IS22.4 - Accurate Multiple-Output Flyback Converter with Single Secondary Winding
Location: W204ABC

Industry Session Presenter: Yi Li – Power Integrations

Flyback Converters for Low Power Applications

10:30 AM – 10:55 AM ET

IS22.5 - Peak Power Optimization Using ZVS, Active-Clamp Flyback Converters
Location: W204ABC

Industry Session Presenter: Donnie Saturno – Power Integrations

Flyback Converters for Low Power Applications

10:55 AM – 11:20 AM ET

IS22.6 - Achieving Zero Input Power for No-Load Operation in a 5 W to 10 W Flyback Power Supply
Location: W204ABC

Industry Session Presenter: John Mardy Rongavilla – Power Integrations

Flyback Converters for Low Power Applications

8:30 AM – 11:20 AM ET

IS23 - Measurement Techniques and Other Topics
Location: W205A

Industry Session Chair: Davide Giacomini – Infineon Technologies AG

Industry Session Chair: Raj Pulugurtha, PhD – Florida International University

8:30 AM – 8:55 AM ET

IS23.1 - Measurement of In-Circuit Magnetic Properties of Core Using Oscilloscope for Efficient Automotive Designs
Location: W205A

Industry Session Presenter: Srikrishna N H – Tektronix India Pvt. Ltd.

Measurement Techniques and Other Topics

8:55 AM – 9:20 AM ET

IS23.2 - Using a High Bandwidth Loss Probe to Measure SiC and GAN Fets Losses with a Lower Bandwidth Oscilloscope
Location: W205A

Industry Session Presenter: Ken Henderson – Cleverscope

Measurement Techniques and Other Topics

9:20 AM – 9:45 AM ET

IS23.3 - The Secrets to an Accurate and Useful Double Pulse Test
Location: W205A

Industry Session Presenter: Julius Rice – Wolfspeed

Measurement Techniques and Other Topics

9:45 AM – 10:10 AM ET

IS23.4 - Recirculating Load Testbed for High Power Inverter Validation
Location: W205A

Industry Session Presenter: Jonathan Hayes – Wolfspeed

Measurement Techniques and Other Topics

10:30 AM – 10:55 AM ET

IS23.5 - Small Form-Factor Tunable Wavelength Horticultural Led Driver
Location: W205A

Industry Session Presenter: Fred Song – Infineon Technologies Americas Corp.

Measurement Techniques and Other Topics

10:55 AM – 11:20 AM ET

IS23.6 - Designing an Input EMI Filter for an Automotive Multiphase Buck Converter
Location: W205A

Industry Session Presenter: Eric Lee – Texas Instruments

Measurement Techniques and Other Topics

8:30 AM – 11:20 AM ET

IS24 - Energy Storage Systems and Their Relevant Aspects
Location: W205BC

Industry Session Chair: Victor Boyadzhyan – MidContinent Instruments and Avionics

Industry Session Chair: Eric Swenson, MSEE – IBM

8:30 AM – 8:55 AM ET

IS24.1 - Fitness for Purpose – Choosing the Right Storage Device for IoT Applications
Location: W205BC

Industry Session Presenter: Mike Hayes, MEngSc – Tyndall National Institute

Energy Storage Systems and Their Relevant Aspects

8:55 AM – 9:20 AM ET

IS24.2 - V2G Storage with School Bus Fleets
Location: W205BC

Industry Session Presenter: Aaron Nutt – Dynapower

Energy Storage Systems and Their Relevant Aspects

9:20 AM – 9:45 AM ET

IS24.3 - Grid Tied Storage
Location: W205BC

Industry Session Presenter: Babu Chalamala, PhD – Sandia National Laboratories

Energy Storage Systems and Their Relevant Aspects

9:45 AM – 10:10 AM ET

IS24.4 - SuperCapacitor Applications
Location: W205BC

Industry Session Presenter: Nihal Kularatna, DSc – The University of Waikato

Energy Storage Systems and Their Relevant Aspects

10:30 AM – 10:55 AM ET

IS24.5 - High Power and Dynamic Wireless Charging of Electric Vehicles
Location: W205BC

Industry Session Presenter: Veda Prakash Galigekere – UT Battelle ORNL

Energy Storage Systems and Their Relevant Aspects

10:55 AM – 11:20 AM ET

IS24.6 - Panel Discussion on Energy Storage Technologies
Location: W205BC

Industry Session Presenter: Victor Boyadzhyan – Arseco Laboratories

Energy Storage Systems and Their Relevant Aspects

9:00 AM – 10:30 AM ET

PELS VP of Standards Committee
Location: Rosen Centre Salon 18

9:00 AM – 12:00 PM ET

PELS VP of Technical Operations
Location: Rosen Centre Salon 17

10:10 AM – 10:40 AM ET

Break
Location: Outside of Technical & Industry Session Rooms

Speaker: APEC 2023

11:15 AM – 1:45 PM ET

Lunch
Location: Hall WA3

Speaker: APEC 2023

11:30 AM – 1:30 PM ET

D01 - AC-DC Converters
Location: HALL WA3

Technical Dialogue Session Chair: Mike Ranjram – Arizona State University

11:30 AM – 1:30 PM ET

D01.1 - Precise Gate Timing Control Based on State Trajectory Analysis for 3.3kW Bidirectional AC/DC Converter
Location: HALL WA3

Technical Dialogue Presenter: Ryusuke Kanomata – Panasonic Industry Co., Ltd.

Bidirectional AC/DC converters

11:30 AM – 1:30 PM ET

D01.2 - Evaluation of a Single-Phase Soft Switched AC/DC Active Front End Converter for Solid-State Transformer Applications
Location: HALL WA3

Technical Dialogue Presenter: Anup Anurag – Delta Electronics Americas

Power Factor Correction, CCM, DCM, CRM/BCM Control, Bridgeless

11:30 AM – 1:30 PM ET

D01.3 - A ZVD Control Based 5kW iTCM Totem Pole PFC for Server Power
Location: HALL WA3

Technical Dialogue Presenter: Brent McDonald – Texas Instruments

Power Factor Correction, CCM, DCM, CRM/BCM Control, Bridgeless

11:30 AM – 1:30 PM ET

D01.4 - Design Methodology for Power-Dense and Cost-Effective Series-Stacked Active Power Decoupling Circuit
Location: HALL WA3

Technical Dialogue Presenter: Sandeep Anand – Indian Institute of Technology

Single-Phase and Three-Phase Input

11:30 AM – 1:30 PM ET

D01.5 - Weight Optimization of a Flying Capacitor Multilevel Converter
Location: HALL WA3

Technical Dialogue Presenter: Sami Pettersson – ABB

Bidirectional AC/DC converters

11:30 AM – 1:30 PM ET

D01.6 - Cascaded Half-Bridge Multi-Level Multi-Outputs Bridgeless PFC
Location: HALL WA3

Technical Dialogue Presenter: Jun Min – The University of British Columbia

Power Factor Correction, CCM, DCM, CRM/BCM Control, Bridgeless

11:30 AM – 1:30 PM ET

D01.7 - AC Dropout Algorithm for Digitally Controlled Totem-Pole Bridgeless PFC
Location: HALL WA3

Technical Dialogue Presenter: Jongwan Kim – META

Power Factor Correction, CCM, DCM, CRM/BCM Control, Bridgeless

11:30 AM – 1:30 PM ET

D01.10 - A Single-Stage AC/DC Bridge-Less Converter with an Adaptive Control Scheme and Reduced DC-Link and Output Capacitances for High Voltage EV Systems
Location: HALL WA3

Technical Dialogue Presenter: Siamak Derakhshan – York University

Power Factor Correction, CCM, DCM, CRM/BCM Control, Bridgeless

11:30 AM – 1:30 PM ET

D01.11 - PCB-Based Magnetics Integration and Common-Mode Noise Suppression for a High-Frequency PFC
Location: HALL WA3

Technical Dialogue Presenter: Shuo Wang, PhD candidate – Virginia Tech

Power Factor Correction, CCM, DCM, CRM/BCM Control, Bridgeless

11:30 AM – 1:30 PM ET

D01.12 - A Modular DC to Three-Phase AC Converter Topology with Minimized Intermediate Energy Storage Requirements
Location: HALL WA3

Technical Dialogue Presenter: Wiwin Hartini – Portland State University

Bidirectional AC/DC converters

11:30 AM – 1:30 PM ET

D01.13 - A Two-Step Commutation Scheme with Analysis of Zero-Voltage Switching for Bidirectional Isolated Matrix Converter
Location: HALL WA3

Technical Dialogue Presenter: Bing Gong – Toronto Metropolitan University

Single-Phase and Three-Phase Input

11:30 AM – 1:30 PM ET

D01.14 - An Active EMI Filter for High-Power Off-Line Applications
Location: HALL WA3

Technical Dialogue Presenter: Tim Merkin

Single-Phase and Three-Phase Input

11:30 AM – 1:30 PM ET

D01.15 - Flying Capacitor Voltage Imbalance Protection in Multilevel Bidirectional Inverters During Surge
Location: HALL WA3

Technical Dialogue Presenter: Rytis Beinarys, BE PD – ICERGi

Power Factor Correction, CCM, DCM, CRM/BCM Control, Bridgeless

11:30 AM – 1:30 PM ET

D02 - DC-DC Converters I
Location: HALL WA3

Technical Dialogue Session Chair: Mark DeMarie – IBM

11:30 AM – 1:30 PM ET

D02.2 - A Low-Ripple High-Frequency High-Voltage Power Supply for Ion Pumps
Location: HALL WA3

Technical Dialogue Presenter: Zhechi Ye – Stanford University

Resonant Converters

11:30 AM – 1:30 PM ET

D02.3 - A Novel Non-Isolated Bidirectional 48V-12V DCX Converter
Location: HALL WA3

Technical Dialogue Presenter: Song Ding – Southeast University

Resonant Converters

11:30 AM – 1:30 PM ET

D02.4 - Decoupling Power Sharing Control Scheme with the Fast Dynamic Response for a Dual-Input Dual-Active-Bridge DC-DC Converter Topology
Location: HALL WA3

Technical Dialogue Presenter: Pasan Gunawardena – University of Alberta

Bidirectional dc/dc converters

11:30 AM – 1:30 PM ET

D02.5 - Trans-Inductors Versus Discrete Inductors in Multiphase Voltage Regulators: An Analytical and Experimental Comparative Study
Location: HALL WA3

Technical Dialogue Presenter: Horthense D. Tamdem, MSEE – Intel corporation

Point-of-Load (PoL) and Multi-Phase Converters

11:30 AM – 1:30 PM ET

D02.6 - 5-Level E-Type Dual Active Bridge Converter for Photovoltaic Applications
Location: HALL WA3

Technical Dialogue Presenter: Stefano Menicanti – Roma Tre University

Bidirectional dc/dc converters

11:30 AM – 1:30 PM ET

D02.7 - Asymmetrically Driven HB-LLC Resonant Converter Integrated in Low-Power IoT Devices
Location: HALL WA3

Technical Dialogue Presenter: Tom Urkin – PEMIC center - Ben Gurion University of the Negev

Resonant Converters

11:30 AM – 1:30 PM ET

D02.8 - A Two-Phase Hybrid Switched Capacitors Converter with Interleaving Control Scheme for Flying Capacitors Self-Balancing
Location: HALL WA3

Technical Dialogue Presenter: Weidong Xue – Fudan University

Point-of-Load (PoL) and Multi-Phase Converters

11:30 AM – 1:30 PM ET

D02.9 - Magnetics Analysis and Optimization Techniques for a 2 MHz GaN-Based Active-Clamped Isolated SEPIC Converter
Location: HALL WA3

Technical Dialogue Presenter: Stefano Cabizza, PhD – University of Padova

Resonant Converters

11:30 AM – 1:30 PM ET

D02.10 - Virtually Isolated Class E Converter with Coupled Capacitors
Location: HALL WA3

Technical Dialogue Presenter: Geon-Hong Min – Seoul National University

Resonant Converters

11:30 AM – 1:30 PM ET

D02.11 - Comparison of Three Buck Topologies for Wide Output Voltage Applications
Location: HALL WA3

Technical Dialogue Presenter: Oisín Anderson – University of Galway

Point-of-Load (PoL) and Multi-Phase Converters

11:30 AM – 1:30 PM ET

D02.12 - Design and Analysis of A Novel Current-Fed Three Level Three Limb TAB Converter with Auxilary Inductor for DC Micro-Grid Application
Location: HALL WA3

Technical Dialogue Presenter: Subhasish Pal – Indian Institute of Technology

Bidirectional dc/dc converters

11:30 AM – 1:30 PM ET

D02.13 - Design and Implementation of a Five-Port LLC Converter for PV Applications
Location: HALL WA3

Technical Dialogue Presenter: Reza Rezaii – University of Central Florida

Resonant Converters

11:30 AM – 1:30 PM ET

D02.14 - Non-Dissipative Regenerative Snubber for Isolated DC-DC Ćuk Converter
Location: HALL WA3

Technical Dialogue Presenter: David Arturo Porras Fernandez – University of Arkansas

Hard- and Soft-Switched

11:30 AM – 1:30 PM ET

D02.15 - Multi-Frequency Trans-Inductor Voltage Regulator
Location: HALL WA3

Technical Dialogue Presenter: Stefano Saggini, PhD – Università di Udine DPIA

Voltage Regulator Modules (VRM)

11:30 AM – 1:30 PM ET

D03 - DC-DC Converters II
Location: HALL WA3

Technical Dialogue Session Chair: Juan Rivas – Stanford University

11:30 AM – 1:30 PM ET

D03.1 - Controller Design and Phase Current Balancing for Fast Dynamic Performance in Voltage Mode Controlled Multiphase Buck Converters
Location: HALL WA3

Technical Dialogue Presenter: Teja Golla – IIT Kharagpur

Point-of-Load (PoL) and Multi-Phase Converters

11:30 AM – 1:30 PM ET

D03.2 - Analysis of Resonant PWM Active-Clamp Ćuk DC/DC Converter
Location: HALL WA3

Technical Dialogue Presenter: Shantanu Gupta – UIC

Resonant Converters

11:30 AM – 1:30 PM ET

D03.3 - 400V-to-48V Transformer-Isolated Stacked Active Bridge Converter with Integrated Magnetics
Location: HALL WA3

Technical Dialogue Presenter: Branko Majmunović – University of Colorado Boulder, Texas Instruments

Hard- and Soft-Switched

11:30 AM – 1:30 PM ET

D03.4 - Improvement Technique for Power Efficiency of Dab DC-DC Converters by Reducing Hard Switching and Copper Losses in Light Loads
Location: HALL WA3

Technical Dialogue Presenter: Masahiro Tajiri – Nagasaki University

Bidirectional dc/dc converters

11:30 AM – 1:30 PM ET

D03.5 - A Practical and Cost Effective Wide Range 6kW LLC Converter for EV Charging Infrastructure
Location: HALL WA3

Technical Dialogue Presenter: Alfio Scuto – STMicroelectronics

Resonant Converters

11:30 AM – 1:30 PM ET

D03.6 - Active Clamp Push-Pull Full-Bridge Bidirectional DC-DC Converter with Wide Load Range
Location: HALL WA3

Technical Dialogue Presenter: Heng Xi – Nanjing University of Aeronautics and Astronautics

Bidirectional dc/dc converters

11:30 AM – 1:30 PM ET

D03.7 - Study on Improving Line Frequency Ripple of Bidirectional DC-DC CLLC Resonant Converter
Location: HALL WA3

Technical Dialogue Presenter: Kuo-Fu Liao

Bidirectional dc/dc converters

11:30 AM – 1:30 PM ET

D03.8 - A Multi-Phase Series Capacitor Trans-Inductor Voltage Regulator with High Switching Frequency and Fast Dynamic Response
Location: HALL WA3

Technical Dialogue Presenter: Liang Wang – ShanghaiTech University

Point-of-Load (PoL) and Multi-Phase Converters

11:30 AM – 1:30 PM ET

D03.9 - High-Frequency Fully-ZVS Isolated Current-Fed Bidirectional DC-DC Converter
Location: HALL WA3

Technical Dialogue Presenter: Zahra Saadatizadeh – University of Arkansas

Bidirectional dc/dc converters

11:30 AM – 1:30 PM ET

D03.10 - Open Circuit Switch Fault Management Method of a Multi-Phase Synchronous Buck Converter for EV Charging Application
Location: HALL WA3

Technical Dialogue Presenter: Md Rashed Hassan Bipu – NC State University

Bidirectional dc/dc converters

11:30 AM – 1:30 PM ET

D03.11 - A 400W, 99.3% Efficient GaN Buck-Boost Converter
Location: HALL WA3

Technical Dialogue Presenter: Alex Q. Huang – University of Texas at Austin

Hard- and Soft-Switched

11:30 AM – 1:30 PM ET

D03.12 - A Reconfigurable Modular Switched Capacitor Structure for High Efficiency Over a Wide Input Voltage Range
Location: HALL WA3

Technical Dialogue Presenter: PENG FANG, PhD – University of Minnesota Duluth

Hard- and Soft-Switched

11:30 AM – 1:30 PM ET

D03.13 - Bootstrap Operation in eGaN-Based Full-Wave ZCS Quasi-Resonant Synchronous Buck Converter for Server Application
Location: HALL WA3

Technical Dialogue Presenter: Anwesha Mukhopadhyay, MTech – Indian Institute of Science

Point-of-Load (PoL) and Multi-Phase Converters

11:30 AM – 1:30 PM ET

D03.14 - Deep-Learning-Based Fault Detection and Location Method Applied on Isolated DC-DC Converter
Location: HALL WA3

Technical Dialogue Presenter: Amin Ashraf Gandomi – University of California Santa Cruz

Hard- and Soft-Switched

11:30 AM – 1:30 PM ET

D03.15 - Superimposed Quadratic Buck Converter for High-Efficiency Direct 48V/1V Applications
Location: HALL WA3

Technical Dialogue Presenter: Jin Woong Kwak – The University of Texas at Dallas

Point-of-Load (PoL) and Multi-Phase Converters

11:30 AM – 1:30 PM ET

D04 - Utility Interface
Location: HALL WA3

Technical Dialogue Session Chair: Jaber Abu Qahouq, PhD – The University of Alabama

Technical Dialogue Session Chair: Jonathan W. Kimball – Missouri University of Science and Technology

11:30 AM – 1:30 PM ET

D04.1 - Improvement of Motor Side Converter Voltage Using Common Mode Filter at the Grid Side Converter in a Grid Connected Motor Drive System
Location: HALL WA3

Technical Dialogue Presenter: Gopal Mondal – Siemens AG

Power Quality, UPS, Filters

11:30 AM – 1:30 PM ET

D04.3 - Conduction Performance Evaluation of Power Semiconductor Device Technologies for Solid-State DC Breakers
Location: HALL WA3

Technical Dialogue Presenter: Andreas Giannakis – Norwegian University of Science and Technology

Power Quality, UPS, Filters

11:30 AM – 1:30 PM ET

D04.4 - Droop Control Strategy for Series-Connected Current-Source Inverter Based Offshore Wind Energy Conversion System
Location: HALL WA3

Technical Dialogue Presenter: Hang Gao – Washington State University Vancouver

Power Generation, Transmission and Distribution

11:30 AM – 1:30 PM ET

D04.5 - A Hybrid Solid State Transformer (HSST) Based on a Two Stage Isolated Solid State Transformer (SST) : Control and Modulation
Location: HALL WA3

Technical Dialogue Presenter: Sanjay Rajendran – University of Texas at Austin

Solid-State Transformers

11:30 AM – 1:30 PM ET

D04.6 - Mode Switching of H-Bridge Time-Sharing Multiplexing
Location: HALL WA3

Technical Dialogue Presenter: Chongbin Zhao – Tsinghua University

Solid-State Transformers

11:30 AM – 1:30 PM ET

D04.7 - PV Inverter Control Algorithm Using Reinforcement Learning to Mitigate the Duck Curve Problem
Location: HALL WA3

Technical Dialogue Presenter: Yu-Quan Chen – National Taiwan University

SmartGrid

11:30 AM – 1:30 PM ET

D04.8 - A High Power Density 75kVA Air-Cooled SiC Intelligent Power Stage (IPS) as a Universal Building Block for Grid Applications
Location: HALL WA3

Technical Dialogue Presenter: Zibo Chen – The University of Texas at Austin

Bidirectional grid interface converters

11:30 AM – 1:30 PM ET

D04.9 - SiC Bidirectional Solid-State Circuit Breaker with Soft-Start Function for Motor Control Center
Location: HALL WA3

Technical Dialogue Presenter: Jiale Zhou – University of North Carolina at Charlotte

Power Generation, Transmission and Distribution

11:30 AM – 1:30 PM ET

D04.10 - Development of a High Frequency/Power Three-Port SST Suitable for Solar PV/Battery Interface
Location: HALL WA3

Technical Dialogue Presenter: Saban Ozdemir – Gazi University

Solid-State Transformers

11:30 AM – 1:30 PM ET

D04.11 - A Virtual Impedance Method Based on Power Adaptive Compensator for Cascaded DC System
Location: HALL WA3

Technical Dialogue Presenter: Xinyang Su – Xi’an Jiaotong University

Power Quality, UPS, Filters

11:30 AM – 1:30 PM ET

D04.12 - Three Phase Dual Active Bridges with Integrated Series Inductance Using 10-kV SiC MOSFETs for Medium-Voltage Grid Applications
Location: HALL WA3

Technical Dialogue Presenter: Roderick A. Gomez – University of Arkansas

Solid-State Transformers

11:30 AM – 1:30 PM ET

D04.13 - Scalable Auxiliary Power Supply System for SiC-Based Modular Medium Voltage Converters
Location: HALL WA3

Technical Dialogue Presenter: Ning Yan – Virginia Polytechnic Institute and State University

Distributed Energy Systems

11:30 AM – 1:30 PM ET

D04.14 - Design Challenges of the 22 kV Solid-State Switch for Capacitor Discharge Application Based on 3.3 kV SiC MOSFET Super-Cascode
Location: HALL WA3

Technical Dialogue Presenter: Ning Yan – Virginia Polytechnic Institute and State University

Power Generation, Transmission and Distribution

11:30 AM – 1:30 PM ET

D04.15 - Optimal Ratio of Grid-Forming to Grid-Following Inverters Towards Resilient Power Electronics Dominated Grids
Location: HALL WA3

Technical Dialogue Presenter: Alireza Zare – University of Illinois Chicago

SmartGrid

11:30 AM – 1:30 PM ET

D04.17 - Switching Loss Analysis of Three-Phase Three-Level Neutral Point Clamped Converter Pole Enabled by Series-Connected 10 kV SiC MOSFETs
Location: HALL WA3

Technical Dialogue Presenter: Nithin Kolli – North Carolina State University

Bidirectional grid interface converters

11:30 AM – 1:30 PM ET

D05 - Motor Drives & Inverter
Location: HALL WA3

Technical Dialogue Session Chair: Rakib Islam – American Axle & Manufacturing

Technical Dialogue Session Chair: Ali Safayet – Halla Mechatronics

11:30 AM – 1:30 PM ET

D05.1 - Improved Q-MRAS Based Online Rotor Time Constant Compensation for IFOC Induction Motor Drives
Location: HALL WA3

Technical Dialogue Presenter: Heonyoung Kim – Renesas Electronics America

AC, DC, BLDC Motor Drives

11:30 AM – 1:30 PM ET

D05.2 - Damping Controller Integrated Into Output Current Control Loop and Design for Multiple Servo Drive Systems Connected to Common DC-Bus Line
Location: HALL WA3

Technical Dialogue Presenter: Katsuki Miura – Nagaoka University of Technology

AC, DC, BLDC Motor Drives

11:30 AM – 1:30 PM ET

D05.3 - Carrier Based Pulse Width Modulation for Low Distortion Sinewave Generation Using Hybrid Harmonics Elimination Method
Location: HALL WA3

Technical Dialogue Presenter: Ron Vaizman – Ben Gurion University

High Performance Drives

11:30 AM – 1:30 PM ET

D05.4 - Dead Time Reduction Strategy for GaN-Based Low-Voltage Inverter in Motor Drive System
Location: HALL WA3

Technical Dialogue Presenter: Vincenzo Barba – Politecnico di Torino

AC, DC, BLDC Motor Drives

11:30 AM – 1:30 PM ET

D05.5 - Optimal Low Switching Frequency PWM Pattern for a Three-Level Neutral Point Clamped (NPC) Inverter
Location: HALL WA3

Technical Dialogue Presenter: Aathira Karuvaril Vijayan – McMaster University

Single- and Multi-Phase Inverters

11:30 AM – 1:30 PM ET

D05.6 - Temperature Estimation in Induction Motors Using Machine Learning
Location: HALL WA3

Technical Dialogue Presenter: Panagiotis Kakosimos, PhD – ABB AB Corporate Research

AC, DC, BLDC Motor Drives

11:30 AM – 1:30 PM ET

D05.7 - Encoderless Predictive Control of PMSM Drives Combining Sliding-Mode and Luenberger Observers
Location: HALL WA3

Technical Dialogue Presenter: Panagiotis Kakosimos, PhD – ABB AB Corporate Research

High Performance Drives

11:30 AM – 1:30 PM ET

D05.9 - Compensating the Performance of PMSM Based Electrified Powertrain Through Sliding Mode Control
Location: HALL WA3

Technical Dialogue Presenter: Athar Hanif – The Ohio State University

AC, DC, BLDC Motor Drives

11:30 AM – 1:30 PM ET

D05.10 - Maximum Torque Per Ampere Control Algorithm for an Interior Permanent Magnet Synchronous Motor Drive Reflecting the PM Flux Linkage Variations
Location: HALL WA3

Technical Dialogue Presenter: Sungmin Choi – Chonbuk national university

AC, DC, BLDC Motor Drives

11:30 AM – 1:30 PM ET

D05.11 - The Duality Droop Control for Grid-Tied Cascaded Microinverter
Location: HALL WA3

Technical Dialogue Presenter: Maohang Qiu – University of Dayton

Single- and Multi-Phase Inverters

11:30 AM – 1:30 PM ET

D05.12 - Switching Loss Reduction of Dual Inverters Using Isolated Voltage Sources Fed an Open-End Winding Interior Permanent Magnet Synchronous Motor
Location: HALL WA3

Technical Dialogue Presenter: Hyung-Woo Lee – Ajou University

AC, DC, BLDC Motor Drives

11:30 AM – 1:30 PM ET

D05.14 - Dynamic Level Shift Control Scheme for Power Loss Reduction in T-Type Traction
Location: HALL WA3

Technical Dialogue Presenter: Shivam Chaturvedi – University of Michigan Dearborn

Single- and Multi-Phase Inverters

11:30 AM – 1:30 PM ET

D05.17 - Gallium-Nitride (GaN) Transistor Design for Transient-Overload Power Applications
Location: HALL WA3

Technical Dialogue Presenter: Jinshui Zhang – Duke University

Single- and Multi-Phase Inverters

11:30 AM – 1:30 PM ET

D06 - Devices & Components
Location: HALL WA3

Technical Dialogue Session Chair: Zheyu Zhang – Clemson University

Technical Dialogue Session Chair: Ali Safayet – Halla Mechatronics

11:30 AM – 1:30 PM ET

D06.1 - DC Series ARC Fault Detection and Extinguishing Method Using Input Capacitor Design
Location: HALL WA3

Technical Dialogue Presenter: Hwa-Pyeong Park – Kumoh National Institute of Technology

Interconnects and Fuses

11:30 AM – 1:30 PM ET

D06.2 - Investigation of the Parasitic Inductance Influence on the Short-Circuit Behaviour of High Voltage IGBTs
Location: HALL WA3

Technical Dialogue Presenter: He Du – Kyushu Institute of Technology

Power Silicon MOSFETs, BJTs, IGBTs

11:30 AM – 1:30 PM ET

D06.3 - Assessment of MOSFET Switching Losses in an LLC Converter by a Calorimetric Method
Location: HALL WA3

Technical Dialogue Presenter: Alfio Scuto – STMicroelectronics

Power Silicon MOSFETs, BJTs, IGBTs

11:30 AM – 1:30 PM ET

D06.4 - Physics-Based Modeling of Packaging-Related Degradation of IGBT Modules
Location: HALL WA3

Technical Dialogue Presenter: Yichi Zhang – Aalborg University

Power Silicon MOSFETs, BJTs, IGBTs

11:30 AM – 1:30 PM ET

D06.5 - A Method to De-Skew Probes and Estimate Power Loop Inductance of WBG-DPT Circuits
Location: HALL WA3

Technical Dialogue Presenter: Srikrishna N H – Tektronix India Pvt. Ltd.

SiC MOSFETs and BJTs

11:30 AM – 1:30 PM ET

D06.7 - Design and Implementation of Interleaved Flyback Converter with GaN E-HEMT
Location: HALL WA3

Technical Dialogue Presenter: Kuo-Fu Liao

GaN HEMTs

11:30 AM – 1:30 PM ET

D06.8 - Accuracy Analysis of the LCR Meter-Based Method for C-V Characterization of a Capacitor
Location: HALL WA3

Technical Dialogue Presenter: Zhansen Akhmetov – North Carolina State University

Capacitors, Supercapacitors

11:30 AM – 1:30 PM ET

D06.9 - A GaN Based LCC Converter for Lithium-Ion Battery Chargers
Location: HALL WA3

Technical Dialogue Presenter: Harsha Ademane – ST Microelectronics

GaN HEMTs

11:30 AM – 1:30 PM ET

D06.10 - Design, Packaging, and Empirical Characterization of 1 kV Vertical GaN P-N Diode
Location: HALL WA3

Technical Dialogue Presenter: Sadab Mahmud – University of Toledo

Fast Recovery Diodes

11:30 AM – 1:30 PM ET

D06.11 - A GaN DC-DC Converter with In-Situ Detection of Aging-Induced Coss Changes for Device State-of-Health Determination
Location: HALL WA3

Technical Dialogue Presenter: Samantha K. Murray, MASc – University of Toronto

GaN HEMTs

11:30 AM – 1:30 PM ET

D06.12 - A Self-Powered Two-Terminal MEMS Based Relay with Advanced Control Functions
Location: HALL WA3

Technical Dialogue Presenter: Pallab Midya – Menlo Microsystems Inc.

Interconnects and Fuses

11:30 AM – 1:30 PM ET

D06.13 - Switching Performance Evaluation of 650 V Vertical GaN Fin JFET
Location: HALL WA3

Technical Dialogue Presenter: Ruizhe Zhang – Virginia Polytechnic Institute and State University

GaN HEMTs

11:30 AM – 1:30 PM ET

D06.14 - Paralleling 650 V/150 a GaN HEMTs for Cryogenically Cooled Solid-State Circuit Breaker Applications
Location: HALL WA3

Technical Dialogue Presenter: Ching-Hsiang Yang – University of Tennessee

GaN HEMTs

11:30 AM – 1:30 PM ET

D06.15 - Design of a Medium Voltage PCB-Based Power Bus Considering Current Carrying Capacity for Insulation Integrity in a 6 kV 500 kW Converter
Location: HALL WA3

Technical Dialogue Presenter: Joshua Stewart – Virginia Polytechnic Institute and State University

Interconnects and Fuses

11:30 AM – 1:30 PM ET

D06.16 - Impact of Conduction Current on Output Capacitance Loss in GaN HEMTs
Location: HALL WA3

Technical Dialogue Presenter: Qihao Song – Virginia Tech

GaN HEMTs

11:30 AM – 1:30 PM ET

D07 - Power Converter Design, Packaging, & Integration
Location: HALL WA3

Technical Dialogue Session Chair: Adam Skorek – University of Québec at Trois-Rivières

Technical Dialogue Session Chair: Zhehui Guo – Center for Advanced Power Systems Florida State University

11:30 AM – 1:30 PM ET

D07.1 - A Gallium Nitride Intelligent Power Module Based on Bonding Wire Interconnection
Location: HALL WA3

Technical Dialogue Presenter: Yilong Yao – State Key Laboratory of Electrical Insulation and Power Equipment

Power Modules / High Density Design

11:30 AM – 1:30 PM ET

D07.2 - A Compact Hybrid Sensor for Chip-Level Online Current Sensing in Press-Pack Power Module
Location: HALL WA3

Technical Dialogue Presenter: Weili Guo – Xi'an Jiaotong University

Quality and System Reliability

11:30 AM – 1:30 PM ET

D07.3 - A Double-Sided Cooling 6.5kV SiC MOSFET Power Module with Insulation Enhancement Design
Location: HALL WA3

Technical Dialogue Presenter: Liangjun Ma – School of Electrical Engineering Xi’an Jiaotong University

Power Modules / High Density Design

11:30 AM – 1:30 PM ET

D07.4 - Analysis of a Transistor-Based On-State Voltage Measurement Circuit for Condition Monitoring of Power Transistors
Location: HALL WA3

Technical Dialogue Presenter: Kevin Muñoz Barón – University of Stuttgart

Quality and System Reliability

11:30 AM – 1:30 PM ET

D07.5 - Reliability Monitoring and Predictive Maintenance of Power Electronics with Physics and Data Driven Approach Based on Machine Learning
Location: HALL WA3

Technical Dialogue Presenter: Yujia Cui – ROCKWELL AUTOMATION INC

Quality and System Reliability

11:30 AM – 1:30 PM ET

D07.6 - Transient Thermal Modeling of Power Semiconductors for Long-Term Load Profiles
Location: HALL WA3

Technical Dialogue Presenter: Xinyue Zhang – Northwestern Polytechnical University

Thermal and EMC Management

11:30 AM – 1:30 PM ET

D07.7 - Highly Reliable Silver Sintering Joints for Power Module Application
Location: HALL WA3

Technical Dialogue Presenter: Sihai Chen – Indium Corporation

Power Electronics Packaging

11:30 AM – 1:30 PM ET

D07.8 - A Capacitive Impedance Control Method for Active Capacitor with Adaptive Parameter Capability
Location: HALL WA3

Technical Dialogue Presenter: Zhihao Lin – Aalborg University

Quality and System Reliability

11:30 AM – 1:30 PM ET

D07.10 - High-Temperature (250°C) SiC Power Module Integrated with LTCC-Based Isolated Gate Driver
Location: HALL WA3

Technical Dialogue Presenter: Salahaldein Ahmed – UA

Power Electronics Packaging

11:30 AM – 1:30 PM ET

D07.12 - Advanced GaN IPM for High-Frequency Converter Applications Enabled with Thin-Substrates
Location: HALL WA3

Technical Dialogue Presenter: Sourish S Sinha – FREEDM Systems Center North Carolina State University

Power Modules / High Density Design

11:30 AM – 1:30 PM ET

D07.13 - Packaging and Characterization of an Ultra Compact 1200V PCB SiC MOSFET Half-Bridge Module
Location: HALL WA3

Technical Dialogue Presenter: Wei-Jung Hsu – University of Texas at Austin

Power Modules / High Density Design

11:30 AM – 1:30 PM ET

D07.14 - Hybrid Power Module: Silicon and SiC Combination – Technical Win or Pain
Location: HALL WA3

Technical Dialogue Presenter: Ondrej Picha – onsemi

Power Modules / High Density Design

11:30 AM – 1:30 PM ET

D07.15 - Alternating Sequence and Zero Vector Modulation with Reduced Switching Losses and Common-Mode Voltage in Current Source Inverters
Location: HALL WA3

Technical Dialogue Presenter: Sangwhee Lee – University of Wisconsin-Madison

Thermal and EMC Management

11:30 AM – 1:30 PM ET

D07.16 - Decoupling Device for Small Commutation Loop and Improved Switching Performance with Large Power Transistors
Location: HALL WA3

Technical Dialogue Presenter: Logan Horowitz – UC Berkeley

Power Modules / High Density Design

11:30 AM – 1:30 PM ET

D07.17 - A Mechanically Ultra-Thin Flying Capacitor Multilevel Converter with Embedded Passive Components
Location: HALL WA3

Technical Dialogue Presenter: Nicole Stokowski – University of California Berkeley

Embedding technologies, 3D packaging, and additive manufacturing

11:30 AM – 1:30 PM ET

D07.18 - Thermal Mapping of Power Modules Using Optical Fibers During AC Power Cycling Tests
Location: HALL WA3

Technical Dialogue Presenter: Francesco Iannuzzo – Aalborg University

Technical Dialogue Presenter: Kaichen Zhang, MA – Aalborg University

Thermal and EMC Management

11:30 AM – 1:30 PM ET

D07.19 - 3.3 kV Low-Inductance Full SiC Power Module
Location: HALL WA3

Technical Dialogue Presenter: Yuxiang Chen – Univerity of Arkansas

Power Modules / High Density Design

11:30 AM – 1:30 PM ET

D08 - Modeling & Simulation
Location: HALL WA3

Technical Dialogue Session Chair: Shajjad Chowdhury – Oak Ridge National Lab

Technical Dialogue Session Chair: Dinesh Kumar, PhD – Global Research & Development Center, Danfoss Drives A/S

11:30 AM – 1:30 PM ET

D08.1 - Analysis of Switching Voltage Regulator Noise Coupling to Signal via Using a Novel Simulation Approach
Location: HALL WA3

Technical Dialogue Presenter: Soumya Singh – DELL Technologies

Device and Component Modeling

11:30 AM – 1:30 PM ET

D08.2 - Power Hardware-in-the-Loop Simulation to Verify Protection Coordination for DC Microgrid
Location: HALL WA3

Technical Dialogue Presenter: Kazuki Watanabe – Mitsubishi Heavy Industries Ltd.

Rapid Prototyping

11:30 AM – 1:30 PM ET

D08.3 - Performance Comparison of Miniaturized Isolation Transformer Topologies
Location: HALL WA3

Technical Dialogue Presenter: Yue Wu – Dartmouth

Device and Component Modeling

11:30 AM – 1:30 PM ET

D08.4 - Comprehensive Analysis and Design Optimization of the Dual Active Bridge DC-DC Converter with Finite Magnetizing Inductance
Location: HALL WA3

Technical Dialogue Presenter: Harsha Vardhan – University of Sheffield

Circuits and Systems

11:30 AM – 1:30 PM ET

D08.5 - Heat Cycle Failure Point Prediction by 3D Thermal Stress Analysis for Medium Voltage Power Module
Location: HALL WA3

Technical Dialogue Presenter: Masaki Takahashi – Aalborg university

Device and Component Modeling

11:30 AM – 1:30 PM ET

D08.6 - A Virtual Prototyping System for Silicon-Carbide Power Modules
Location: HALL WA3

Technical Dialogue Presenter: James Victory – ON Semiconductor

Technical Dialogue Presenter: Klaus Neumaier – onsemi

Rapid Prototyping

11:30 AM – 1:30 PM ET

D08.7 - An Implementation of Dowell Model with Neural Network to Foil Winding Transformer
Location: HALL WA3

Technical Dialogue Presenter: Yu Hsin Wu – Nagoya University

Device and Component Modeling

11:30 AM – 1:30 PM ET

D08.8 - Development of Simulation Prediction Techniques for Low Frequency Emissions
Location: HALL WA3

Technical Dialogue Presenter: Yanwen Lai – University of Florida

Software Tools

11:30 AM – 1:30 PM ET

D08.9 - Switching Converter Circuits Representation in CCM & DCM Using Graph Neural Network
Location: HALL WA3

Technical Dialogue Presenter: Ahmed Khamis – University at Albany SUNY

Circuits and Systems

11:30 AM – 1:30 PM ET

D08.10 - Circuit Structure Dependent Multi-Variable Regression Model Based Predictions for DC-DC Converters
Location: HALL WA3

Technical Dialogue Presenter: Ahmed Khamis – University at Albany SUNY

Circuits and Systems

11:30 AM – 1:30 PM ET

D08.11 - A Systematic Parasitic Capacitance Extraction Procedure for Three Level Neutral Point Clamped Inverter Modules
Location: HALL WA3

Technical Dialogue Presenter: Shin-Yu Chen – Center for Power Electronics Systems Virginia Tech

Parasitics

11:30 AM – 1:30 PM ET

D09 - Control I
Location: HALL WA3

Technical Dialogue Session Chair: Jaber Abu Qahouq, PhD – The University of Alabama

11:30 AM – 1:30 PM ET

D09.1 - Time Domain Analysis of Series-Resonant Converter in Auxiliary Power Supply for Medium-Voltage Converter
Location: HALL WA3

Technical Dialogue Presenter: Zhixing Yan – Aalbory University

Gate Drive Circuits

11:30 AM – 1:30 PM ET

D09.2 - Dynamic Modeling of Peak Current Mode Controlled Two-Phase PWM Converters with Coupled Inductors
Location: HALL WA3

Technical Dialogue Presenter: Arvind Sivakumar – University of Colorado-Boulder

Current-Mode and Voltage-Mode Control

11:30 AM – 1:30 PM ET

D09.3 - Enhanced Model Predictive Nearest Level Control for 5-Level Flying Capacitor Multilevel Converter, Hardware Implementation and Comparison
Location: HALL WA3

Technical Dialogue Presenter: Armin Ebrahimian – Marquette University

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D09.4 - Stability Impact of Hybrid Synchronization Strategy on Virtual-Admittance-Based Grid-Forming Inverters
Location: HALL WA3

Technical Dialogue Presenter: Liang Zhao – Aalborg University

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D09.5 - Issues of Impedance Emulation of Converter-Based Grid Emulator for LVRT Test
Location: HALL WA3

Technical Dialogue Presenter: Zejie Li, PhD – Department of Energy Aalborg University

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D09.6 - Surge Current Reduction in LLC Resonant Converter with a Hybrid Control Strategy of PFM and PSM for Expansion of Output Voltage Range
Location: HALL WA3

Technical Dialogue Presenter: Ryo Moriyasu – Kyushu University

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D09.7 - Grid-Forming Nature Retaining Fault Ride-Through Control
Location: HALL WA3

Technical Dialogue Presenter: M A Awal, PhD – Danfoss

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D09.8 - Small-Signal Model of Multiphase Constant On-Time Control with Phase Overlapping
Location: HALL WA3

Technical Dialogue Presenter: Sundaramoorthy Sridhar – Virginia Polytechnic Institute and State University

Current-Mode and Voltage-Mode Control

11:30 AM – 1:30 PM ET

D09.9 - Performance Enhancement of a Dual Active Bridge by a Genetic Algorithm Based Routine for Optimal Parameters of a Cascade Control
Location: HALL WA3

Technical Dialogue Presenter: Nikolai Weitz – Friedrich-Alexander-Universität Erlangen-Nürnberg

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D09.10 - Improved Control for Three-Phase Rectifiers with Constant Power Loads
Location: HALL WA3

Technical Dialogue Presenter: Franco Degioanni – The University of British Columbia

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D09.11 - Sensorless Speed and Vector Control of Induction Motor Based on Rotor Slot Harmonics
Location: HALL WA3

Technical Dialogue Presenter: Aleksandar Milic – School of Electrical Eengineering University of Belgrade

Sensor and Sensor-less Control

11:30 AM – 1:30 PM ET

D09.12 - Pre-Charge/Start-Up Strategy for Flying-Capacitor Modular Multilevel Converter (FC-MMC) with Damping of L-C Oscillations
Location: HALL WA3

Technical Dialogue Presenter: Riccardo Breda – University of Udine

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D09.13 - Design-Oriented Dissipativity Robustness Enhancement for Current Control of LCL-Filtered Grid-Following VSCs
Location: HALL WA3

Technical Dialogue Presenter: Shan He – Department of Energy Aalborg University

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D09.14 - Data-Driven Controllability of Power Electronics Under Boundary Conditions – A Physics-Informed Neural Network Based Approach
Location: HALL WA3

Technical Dialogue Presenter: Subham Sahoo – Aalborg University

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D09.15 - Coupled Inductor Analysis and Design for Flying-Capacitor Passive Cross-Connected Arms Modular Multilevel Converter (FC-MMC) for PMSM Drive Application
Location: HALL WA3

Technical Dialogue Presenter: Riccardo Breda – University of Udine

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D10 - Control II
Location: HALL WA3

Technical Dialogue Session Chair: Dorin Neacsu – Technical University of Iasi

11:30 AM – 1:30 PM ET

D10.1 - Small Signal Model of Modular Multilevel Converter with Power Synchronization Control
Location: HALL WA3

Technical Dialogue Presenter: Wentao Liu – Aalborg University

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D10.2 - Passivity-Based Admittance Shaping of LCL-Type Grid-Connected Inverters Using Capacitor Voltage Feedforward Active Damping
Location: HALL WA3

Technical Dialogue Presenter: Linguo Liu – Huazhong University of Science and Technology

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D10.3 - Increasing the Utilization of DC-Link Voltage of a Five-Leg VSI Based on Rotor Angle Control of Dual Induction Motors
Location: HALL WA3

Technical Dialogue Presenter: Dmytro Kondratenko – Gdańsk University of Technology

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D10.4 - Feasibility Study on a Novel Robust Current-Mode Method
Location: HALL WA3

Technical Dialogue Presenter: Fabio Cacciotto – ST Microelectronics

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D10.5 - Staircase Matrix Modulation for the Switched-Capacitor Modular Multilevel Converter with Sensor-Less Voltage Balancing
Location: HALL WA3

Technical Dialogue Presenter: Rami Yehia – Florida State University

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D10.6 - Hybrid Lithium Capacitor Voltage Balancing with Planar Power Inductor for Electric Vehicles and Other Applications
Location: HALL WA3

Technical Dialogue Presenter: Mohammad Al-Smadi – University of Alabama

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D10.7 - Interpretable AI for Power Conversion Control
Location: HALL WA3

Technical Dialogue Presenter: Benjamin Schwabe – Infineon Technologies AG

Digital Control

11:30 AM – 1:30 PM ET

D10.9 - Multi-Sampling Asymmetric Dual-Edge Digital Pulse-Width Modulator
Location: HALL WA3

Technical Dialogue Presenter: Giovanni Bonanno, MSc – University of Padova

Digital Control

11:30 AM – 1:30 PM ET

D10.10 - Digital Implementation of a Current Observer with On-Line Current Sample Correction for PFC Rectifiers
Location: HALL WA3

Technical Dialogue Presenter: Mohsin Ejaz Ahmad – University Paderborn

Sensor and Sensor-less Control

11:30 AM – 1:30 PM ET

D10.11 - An Ultra-Fast Inrush-Current-Free Startup Method for Grid-Tie Inverter Without Voltage Sensors
Location: HALL WA3

Technical Dialogue Presenter: Yuchen He – Florida State University

Digital Control

11:30 AM – 1:30 PM ET

D10.12 - Improved Delta-Sigma Modulator for Direct Switch Control of a DC-DC Converter
Location: HALL WA3

Technical Dialogue Presenter: Bart Bokmans – Eindhoven University of Technology

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D10.13 - Performance of Predictive Control Applied to Active Power Filter
Location: HALL WA3

Technical Dialogue Presenter: Darlan Fernandes – Federal University of Paraiba

Control of Power Electronic Converters

11:30 AM – 1:30 PM ET

D10.15 - Closed-Loop Current Control of a Buck Converter via Sensing of Optical Emission from a GaN PN Freewheeling Diode
Location: HALL WA3

Technical Dialogue Presenter: Justin Johnston – Naval Postgraduate School

Sensor and Sensor-less Control

11:30 AM – 1:30 PM ET

D11 - Wireless Power Transfer III
Location: HALL WA3

Technical Dialogue Session Chair: Veda Prakash Galigekere – UT Battelle ORNL

Technical Dialogue Session Chair: Joseph Song-Manguelle, PhD – Oak Ridge National Laboratory

11:30 AM – 1:30 PM ET

D11.1 - Advanced Front-End Monitoring Scheme for Inductive Power Transfer Systems Based on Random Forest Regression
Location: HALL WA3

Technical Dialogue Presenter: Kaiyuan Wang – Hong Kong Polytechnic University

Wireless charging

11:30 AM – 1:30 PM ET

D11.2 - Equilibrating Winding Currents in a DC Transformer for Future Electric Transport Application Based on Inductive Power Transfer
Location: HALL WA3

Technical Dialogue Presenter: Miguel Ángel Moya Garrido – Centro de Electrónica Industrial ETSII UPM

Wireless charging

11:30 AM – 1:30 PM ET

D11.3 - Design of Four Plate Capacitive Coupler with Enhanced Safe Operating Region for Electric Vehicle Wireless Charging Applications
Location: HALL WA3

Technical Dialogue Presenter: Deepak Ronanki – University of Ontario Institute of Technology

Wireless charging

11:30 AM – 1:30 PM ET

D11.4 - Dynamic Improvement of Direct Inductive Power Transfer Systems Using Adaptive Model Predictive-Based Phase Shift Control
Location: HALL WA3

Technical Dialogue Presenter: Huiwen Xiao – Hong Kong Polytechnic University

Wireless charging

11:30 AM – 1:30 PM ET

D11.5 - Optimization of Core Size and Harvested Power for Magnetic Energy Harvesters Based on Cascaded Magnetics
Location: HALL WA3

Technical Dialogue Presenter: Min Gao – Florida State University

Energy Harvesting

11:30 AM – 1:30 PM ET

D11.6 - Impedance-Sensing Technique Using a Dual Harmonic/Negative Peak-Detector in Class EF2 Inverters for LCC-Based WPTs
Location: HALL WA3

Technical Dialogue Presenter: Beom Woo Gu – Samsung Electronics

Wireless charging

11:30 AM – 1:30 PM ET

D11.7 - A Single-Inductor Multiple-Output (SIMO) Buck-Boost Hybrid Converter for Multi-Device Wired and Wireless Charging System
Location: HALL WA3

Technical Dialogue Presenter: Albert Ting Leung Lee, PhD – The University of Hong Kong

Wireless charging

11:30 AM – 1:30 PM ET

D11.8 - Robust Unity-Gain Transmitter-Side Operation Mode in IPT Systems for Low Power Applications
Location: HALL WA3

Technical Dialogue Presenter: Alexis Adrian Narvaez Acaro – Universidad de Zaragoza I3A

Wireless charging

11:30 AM – 1:30 PM ET

D11.9 - Exploring Switching Limit of SiC Inverter for Multi-kW Multi-MHz Wireless Power Transfer System
Location: HALL WA3

Technical Dialogue Presenter: Yao Wang – Drexel University

Wireless charging

11:30 AM – 1:30 PM ET

D11.10 - Practical Receiver Coil Design to Improve Coil Selection in a Multi-Coil Wireless Charging System
Location: HALL WA3

Technical Dialogue Presenter: Li Wang – Google LLC

Wireless charging

11:30 AM – 1:30 PM ET

D11.11 - Design of Different Symmetrical Bidirectional WPT Topologies Based on CC and CV Operating Modes for V2G Applications
Location: HALL WA3

Technical Dialogue Presenter: Isaac Wong – North Carolina State University

Wireless charging

11:30 AM – 1:30 PM ET

D12 - Renewable Energy Systems
Location: HALL WA3

Technical Dialogue Session Chair: Jingbo Liu – Eaton

11:30 AM – 1:30 PM ET

D12.1 - An Integrated Charging Equalizer Based on LLC Resonant DC-DC Converter for Series-Connected Battery String in Plug-In Hybrid Electric Vehicle
Location: HALL WA3

Technical Dialogue Presenter: Yiqing Lu – ShanghaiTech University

Energy Storage Systems

11:30 AM – 1:30 PM ET

D12.2 - A Computationally Efficient Model for Large-Scale Energy Storage Systems with Active Voltage Balancing in Modular Multilevel Converters
Location: HALL WA3

Technical Dialogue Presenter: Mohsen Asoodar – KTH Royal Institute of Technology

Energy Storage Systems

11:30 AM – 1:30 PM ET

D12.3 - Battery Aging Behavior Evaluation Under Variable and Constant Temperatures with Real Loading Profiles
Location: HALL WA3

Technical Dialogue Presenter: Yunhong Che – Aalborg University

Energy Storage Systems

11:30 AM – 1:30 PM ET

D12.4 - Bidirectional Power Flow Controllability of Inverter-Dominated Radial Microgrids Incorporating Harmonic Mitigation Capabilities
Location: HALL WA3

Technical Dialogue Presenter: Augusto Matheus Dos Santos Alonso – University of Sao Paulo

Microgrid Systems

11:30 AM – 1:30 PM ET

D12.5 - Dynamic Power Allocation Control for Frequency Regulation Using Hybrid Electrolyzer Systems
Location: HALL WA3

Technical Dialogue Presenter: Manuel Agredano-Torres – KTH Royal Institute of Technology

Grid-Tied Systems

11:30 AM – 1:30 PM ET

D12.6 - Passivity-Based Stability Design of LCL-Filtered Converters: An Overview
Location: HALL WA3

Technical Dialogue Presenter: Jiacheng Sun – Northwestern Polytechnical University

Grid-Tied Systems

11:30 AM – 1:30 PM ET

D12.7 - 4.8 kW Low Profile Compact Single-Phase PV Converter with GaN-HEMT
Location: HALL WA3

Technical Dialogue Presenter: Huizhong Sun – Aalborg University

Photovoltaic (PV) Inverters and Micro Inverters

11:30 AM – 1:30 PM ET

D12.8 - Intelligent Control Approach Applied for Grid-Forming Power Converters
Location: HALL WA3

Technical Dialogue Presenter: Arman Oshnoei – Aalborg University

Grid-Tied Systems

11:30 AM – 1:30 PM ET

D12.9 - System Integration for Grid-Scale Hybrid Battery Technologies
Location: HALL WA3

Technical Dialogue Presenter: Oindrilla Dutta – Sandia National Labs

Energy Storage Systems

11:30 AM – 1:30 PM ET

D12.10 - Overview of Machine Learning-Enabled Battery State Estimation Methods
Location: HALL WA3

Technical Dialogue Presenter: Yingjian Zhuge – ShanghaiTech University

Energy Storage Systems

11:30 AM – 1:30 PM ET

D12.11 - Cell Equalizers Modeling and Analysis Based on Energy Conservation Method
Location: HALL WA3

Technical Dialogue Presenter: Nasim Hasanpour – University of Alberta

Energy Storage Systems

11:30 AM – 1:30 PM ET

D12.12 - Design of a Multi-Chemistry Battery Pack System for Behind-the-Meter Storage Applications
Location: HALL WA3

Technical Dialogue Presenter: Anik Chowdhury, PhD student – University of Akron

Energy Storage Systems

11:30 AM – 1:30 PM ET

D12.14 - A Single-Phase Switched-Capacitor Five-Level Boost Inverter with Boost Factor Improvement
Location: HALL WA3

Technical Dialogue Presenter: Vinh-Thanh Tran – Ho Chi Minh City University of Technology and Education

Photovoltaic (PV) Inverters and Micro Inverters

11:30 AM – 1:30 PM ET

D12.15 - Design and Analysis of a Grid-Tied Non-Isolated Three-Phase Unfolder for Energy Storage Systems
Location: HALL WA3

Technical Dialogue Presenter: Soumya Nag – Indian Institute of Technology

Bi-directional Power Converters

11:30 AM – 1:30 PM ET

D12.16 - Comparative Study of 100kW Three-Level Bidirectional DC-DC Converters for Battery Storage Integration with 1500V PV Inverter
Location: HALL WA3

Technical Dialogue Presenter: Chen Chen – The University of Texas at Austin

Bi-directional Power Converters

11:30 AM – 1:30 PM ET

D12.17 - A High-Robust Control Scheme for the DAB-Based PPP Energy Storage System
Location: HALL WA3

Technical Dialogue Presenter: Nie Hou – Department of Electrical and Computer Engineering University of Alberta

Energy Storage Systems

11:30 AM – 1:30 PM ET

D12.18 - Comparison of String Inverter and Microinverters: A Case Study Concerning Energy Yield and Accuracy of MPPT Algorithms
Location: HALL WA3

Technical Dialogue Presenter: Rodolfo Godoi – Universidade Federal de Uberlândia

Maximum power point tracking (MPPT)

11:30 AM – 1:30 PM ET

D12.19 - Projection of Safe Operation for Inverters Using Artificial Intelligence-Based Stability Criterion
Location: HALL WA3

Technical Dialogue Presenter: Tareq Hossen – Kansas State University

Grid-Tied Systems

11:30 AM – 1:30 PM ET

D12.20 - SOH Prediction and Abnormality Detection of High Power Lithium-Ion Battery Using Incremental Capacity-Based Health Indicator
Location: HALL WA3

Technical Dialogue Presenter: Pyeong-Yeon Lee – Chungnam National University

Energy Storage Systems

11:30 AM – 1:30 PM ET

D12.21 - Embedded Linux Based SOH Prediction Using LSTM Network Considering EV Load Condition
Location: HALL WA3

Technical Dialogue Presenter: Dongho Han – Chungnam National University

Energy Storage Systems

11:30 AM – 1:30 PM ET

D12.22 - Operation and Control of a PV Converter with Enhanced Stability Based on Virtual Impedance Emulation in a Pseudo Resistive Grid
Location: HALL WA3

Technical Dialogue Presenter: Sara Yzdn – Mathworks

Photovoltaic (PV) Inverters and Micro Inverters

11:30 AM – 1:30 PM ET

D13 - Transportation Applications
Location: HALL WA3

Technical Dialogue Session Chair: Dong Cao, PhD – University of Dayton

Technical Dialogue Session Chair: Rasoul Hosseini, PhD – General Motors

11:30 AM – 1:30 PM ET

D13.1 - Universal Bridgeless Reconfigurable Battery Charger with Wide Output Voltage Range for Next-Generation EV Compatibility
Location: HALL WA3

Technical Dialogue Presenter: Harish Karneddi – Indian Institute of Technology Roorkee

Charging Systems

11:30 AM – 1:30 PM ET

D13.2 - A New Medium-Voltage Architecture for Ultra-Fast Electric Vehicle (EV) Charging Stations
Location: HALL WA3

Technical Dialogue Presenter: Ahoora Bahrami – McMaster University

Charging Systems

11:30 AM – 1:30 PM ET

D13.3 - A Comparative Study of Single- and Multi-Cell Three-Level ANPC Inverters for Electric Aircraft Applications
Location: HALL WA3

Technical Dialogue Presenter: Linke Zhou – Mcmaster University

Power Electronics for Aerospace

11:30 AM – 1:30 PM ET

D13.4 - Series DC Arc Fault in More Electric Aircraft
Location: HALL WA3

Technical Dialogue Presenter: Alperen Çalıkoğlu – ASELSAN INC.

Power Electronics for Aerospace

11:30 AM – 1:30 PM ET

D13.5 - Practical Design Consideration and Experimental Validation of SiC MOSFET-Based 50kW Three-Phase PWM Rectifier for EV Charging Station
Location: HALL WA3

Technical Dialogue Presenter: Ju-A Lee – Sungkyunkwan University

Charging Systems

11:30 AM – 1:30 PM ET

D13.6 - Performance of a 500A, Unidirectional IGCT-Based Solid-State DC Circuit Breaker for Electric Vehicle Charging Applications
Location: HALL WA3

Technical Dialogue Presenter: Govind Chavan – ABB Inc.

Power Electronics for Hybrid and Electric Cars

11:30 AM – 1:30 PM ET

D13.7 - A High-Density 200-kW All Silicon Carbide Three-Phase Inverter for Traction Applications
Location: HALL WA3

Technical Dialogue Presenter: Ahmad Al-Hmoud – University of Arkansas

Vehicular Power Electronic Circuits and Systems

11:30 AM – 1:30 PM ET

D13.8 - Control of a Dual-Active-Bridge DC-DC Converter in a MV Grid-Compliant Solid-State Transformer Based DC Fast Charger
Location: HALL WA3

Technical Dialogue Presenter: Shrivatsal Sharma – North Carolina State University

Charging Systems

11:30 AM – 1:30 PM ET

D13.9 - Design and Implementation of a GaN-Based Capacitively-Isolated Hybrid Dickson Switched-Capacitor DC-DC Converter for Space Applications
Location: HALL WA3

Technical Dialogue Presenter: Samantha Coday – University of California, Berkeley

Power Electronics for Aerospace

11:30 AM – 1:30 PM ET

D13.10 - Solar PV Powered PMSM Driven Encoder-Less Electric Vehicle
Location: HALL WA3

Technical Dialogue Presenter: Shadab Murshid – Nanyang Technological University

Vehicular Power Electronic Circuits and Systems

11:30 AM – 1:30 PM ET

D13.11 - A Wide Input Voltage High-Frequency Current-Fed Resonant Inverter for HFAC Electric Vehicle Auxiliary Electrical System
Location: HALL WA3

Technical Dialogue Presenter: Jiagang Li – Nanjing University of Aeronautics and Astronautics

Power Electronics for Hybrid and Electric Cars

11:30 AM – 1:30 PM ET

D13.12 - FPGA-Based Forced Air-Cooled SiC High-Power-Density Inverter for Electrical Aircraft Applications
Location: HALL WA3

Technical Dialogue Presenter: Xiaoyan Liu – University of Dayton

Power Electronics for Aerospace

11:30 AM – 1:30 PM ET

D13.13 - Multi-Objective Parametric Analysis of EV Traction Inverter Between Reliability and Efficiency
Location: HALL WA3

Technical Dialogue Presenter: Lee Gill – Sandia National Laboratories

Vehicular Power Electronic Circuits and Systems

11:30 AM – 1:30 PM ET

D13.14 - A High Power Density SiC Motor Drive for a 6-Phase PMSM
Location: HALL WA3

Technical Dialogue Presenter: Oscar Lopez – Florida State University

Power Electronics for Aerospace

11:30 AM – 1:30 PM ET

D13.16 - Multiport Resonant GaN-Based DC/DC Converter for Automotive On-Board Low-Voltage Bus
Location: HALL WA3

Technical Dialogue Presenter: Dario Metschies – Reese Techware GmbH

Power Electronics for Hybrid and Electric Cars

11:30 AM – 1:30 PM ET

D13.17 - Experimental Evaluation of Cryogenic Performances of Electronic Components for Signal Isolation in Medium Voltage Power Converters
Location: HALL WA3

Technical Dialogue Presenter: Shimul K. Dam – University of Tennessee, Knoxville

Power Electronics for Aerospace

11:30 AM – 1:30 PM ET

D13.18 - GaN-Based 400V/48V DC-DC Converter with 97% Efficiency and PCB Magnetics for Automotive Applications
Location: HALL WA3

Technical Dialogue Presenter: Pranav Raj Prakash, MS – CPES, Virginia Tech

Power Electronics for Hybrid and Electric Cars

11:30 AM – 1:30 PM ET

D14 - Power Electronics Applications II
Location: HALL WA3

Technical Dialogue Session Chair: Jeffery Nilles – Alpha&Omega Semiconductor

Technical Dialogue Session Chair: Jim Spangler – Independent

11:30 AM – 1:30 PM ET

D14.1 - Bus Voltage Frequency and Phase Estimation Method for Induction Heating Appliances
Location: HALL WA3

Technical Dialogue Presenter: Oscar Lucia, PhD – University of Zaragoza

AC-DC-AC Applications and Matrix Converters

11:30 AM – 1:30 PM ET

D14.2 - Control Strategy for Restarting Procedure of Sensorless PMSM Drives Using Indirect Matrix Converter
Location: HALL WA3

Technical Dialogue Presenter: Yeongsu Bak – Keimyung University

AC-DC-AC Applications and Matrix Converters

11:30 AM – 1:30 PM ET

D14.3 - A Batteryless Full Energy Harvesting System for Inside-Engine Temperature Sensors
Location: HALL WA3

Technical Dialogue Presenter: Andreas Schorer – Wuerth Elektronik eiSos Group

Energy Harvesting

11:30 AM – 1:30 PM ET

D14.4 - Avalanche Transistor-Based Nanosecond Pulse Generator in Plasma-Jet-Driven Magneto-Inertial Fusion Systems
Location: HALL WA3

Technical Dialogue Presenter: Yingjian Zhuge – ShanghaiTech University

Defense and Military Power Electronics

11:30 AM – 1:30 PM ET

D14.5 - A Soft-Switching Zeta-Based AC-Link Universal Converter
Location: HALL WA3

Technical Dialogue Presenter: Mojtaba Salehi – Northeastern University

AC-DC-AC Applications and Matrix Converters

11:30 AM – 1:30 PM ET

D15 - Magnetic Applications
Location: HALL WA3

Technical Dialogue Session Chair: Matt Wilkowski – EnaChip

Technical Dialogue Session Chair: George Slama – Würth Elektronik

11:30 AM – 1:30 PM ET

D15.1 - Design Comparison of Different Coupled Inductor Concepts for Voltage Regulators
Location: HALL WA3

Technical Dialogue Presenter: Feiyang Zhu – Virginia Tech

Magnetics applications

11:30 AM – 1:30 PM ET

D15.2 - Controllable Built-In Leakage Inductance for a Novel Matrix Integrated Transformer
Location: HALL WA3

Technical Dialogue Presenter: Feng Jin – CPES

Magnetics applications

11:30 AM – 1:30 PM ET

D15.3 - Exploiting the Depth: Design, Analysis, and Implementation of High-Power-Density High-Frequency Transformers for One Rack Unit CLLC DCX Converters
Location: HALL WA3

Technical Dialogue Presenter: Giacomo Andrioli – University of Udine

Magnetics applications

11:30 AM – 1:30 PM ET

D15.4 - Investigating UU Powder Core Inductor Winding Configurations Influence on DC Bias Inductance
Location: HALL WA3

Technical Dialogue Presenter: Dorai Yelaverthi – ABB INC.

Magnetics applications

11:30 AM – 1:30 PM ET

D16 - High Frequency Magnetics
Location: HALL WA3

Technical Dialogue Session Chair: George Slama – Würth Elektronik

Technical Dialogue Session Chair: Edward Herbert – PSMA

11:30 AM – 1:30 PM ET

D16.1 - High-Density Planar Integrated Magnetics with Common Mode Noise Immunity
Location: HALL WA3

Technical Dialogue Presenter: Junyun Deng – University of Twente

High-frequency magnetics

11:30 AM – 1:30 PM ET

D16.2 - A High Frequency Coupled Inductor Design for High Power Density DC-DC Converters
Location: HALL WA3

Technical Dialogue Presenter: Ahmed Ismail – University of Arkansas

High-frequency magnetics

11:30 AM – 1:30 PM ET

D16.3 - Design and Fabrication of Low-Loss High-Permeability Soft Magnetic Mouldable Composites for High-Frequency Power Inductor Applications
Location: HALL WA3

Technical Dialogue Presenter: Hasan Ahmadian Baghbaderani – Tyndall National Institute

High-frequency magnetics

11:30 AM – 1:30 PM ET

D16.4 - Load Test Method Using Two Small-Capacity Power Supplies for High-Frequency Transformers in Single-Phase Dual Active Bridge Converters
Location: HALL WA3

Technical Dialogue Presenter: Koji Orikawa – Hokkaido University

High-frequency magnetics

11:30 AM – 1:30 PM ET

D17 - Magnetic Modeling & Simulation
Location: HALL WA3

Technical Dialogue Session Chair: Matt Wilkowski – EnaChip

Technical Dialogue Session Chair: Edward Herbert – PSMA

11:30 AM – 1:30 PM ET

D17.1 - Extended Cauer Equivalent Circuit Model of Inductors: Representing Multi-Resonant Characteristics Due to Parasitic Capacitance
Location: HALL WA3

Technical Dialogue Presenter: Yuki Sato – Aoyama Gakuin University

Magnetics modeling and simulations

11:30 AM – 1:30 PM ET

D17.2 - Comparative Evaluation of Different Cables for Magnetic Couplers in Inductive Power Transfer Systems
Location: HALL WA3

Technical Dialogue Presenter: Jesús Acero – Universidad de Zaragoza

Magnetics modeling and simulations

11:30 AM – 1:30 PM ET

D17.3 - Modeling and Analysis of Coupling Effect in Four Legged Core for Multi-Phase Buck Converter
Location: HALL WA3

Technical Dialogue Presenter: Yanda Lyu – Technical University of Denmark

Magnetics modeling and simulations

11:30 AM – 1:30 PM ET

D17.4 - 3D Thermal Modeling of Inductive Power Transfer Coils Based on Basic Thermal Network for Optimization Analysis
Location: HALL WA3

Technical Dialogue Presenter: Alberto Delgado Expósito – CEI, ETSII, Universidad Politécnica de Madrid

Magnetics modeling and simulations

12:00 PM – 1:00 PM ET

PELS Administrative Committee Luncheon
Location: Rosen Centre Salon 15/16

1:00 PM – 5:00 PM ET

PELS Administrative Committee Meeting
Location: Rosen Centre Salon 15/16

1:45 PM – 3:25 PM ET

T33 - LLC Converters
Location: W109B

Technical Lecture Session Chair: Mladen Ivankovic – infineon technologies

Technical Lecture Session Chair: Juan Rivas – Stanford University

1:45 PM – 2:05 PM ET

T33.1 - High Power Density Three-Phase LLC DC/DC Converter with Coupled Resonant Inductor and Wye-Delta Transformer for Aircraft Applications
Location: W109B

Technical Lecture Presenter: Daniel Ríos Linares – ETSII / Universidad Politécnica de Madrid

Resonant Converters

2:05 PM – 2:25 PM ET

T33.2 - Em Noise Mitigation Using Partial Power Regulated LLC Resonant Converter
Location: W109B

Technical Lecture Presenter: Kyung-Wook Heo – UNIST

Resonant Converters

2:25 PM – 2:45 PM ET

T33.3 - Design Consideration for CLLC Converter with High Power and Wide Gain Range
Location: W109B

Technical Lecture Presenter: Chunyang Zhao – Virginia Tech

Resonant Converters

2:45 PM – 3:05 PM ET

T33.4 - Three-Phase LLC DC/DC Converter in Stack Configuration: A Topology for High-Voltage Conversion Ratio Applications
Location: W109B

Technical Lecture Presenter: Daniel Ríos Linares – ETSII / Universidad Politécnica de Madrid

Resonant Converters

3:05 PM – 3:25 PM ET

T33.5 - Shielding Technique of Planar Transformers to Suppress Common-Mode EMI Noise for LLC Converter with Full Bridge Rectifier
Location: W109B

Technical Lecture Presenter: Feng Jin – CPES

Resonant Converters

1:45 PM – 3:25 PM ET

T34 - Design Techniques for Noise & EMI Reduction
Location: W101

Technical Lecture Session Chair: Liming Liu – Eaton

Technical Lecture Session Chair: Yusi Liu – ON Semiconductor

1:45 PM – 2:05 PM ET

T34.1 - Reduction of CM Noise by Minimizing Near-Field Effects in a DC/DC Converter
Location: W101

Technical Lecture Presenter: Tyler McGrew – Center for Power Electronics Systems Virginia Tech

Thermal and EMC Management

2:05 PM – 2:25 PM ET

T34.2 - Impact Assessment of Common-Mode Interference on Communication Cable in a Motor Drive System: Modified Bulk Current Injection Approach
Location: W101

Technical Lecture Presenter: Kushan Choksi – Stony Brook University

Thermal and EMC Management

2:25 PM – 2:45 PM ET

T34.3 - Review of Radiated EMI Modeling and Mitigation Techniques in Power Electronics Systems
Location: W101

Technical Lecture Presenter: Zhedong Ma, PhD candidate – University of Florida

Power Modules / High Density Design

2:45 PM – 3:05 PM ET

T34.4 - Low Conducted-EMI Single-Phase Boost PFC with Sliding Frequency Modulation
Location: W101

Technical Lecture Presenter: Zhansen Akhmetov – North Carolina State University

Thermal and EMC Management

3:05 PM – 3:25 PM ET

T34.5 - Modeling and Analysis of Differential-Mode Noise in a USB-C Charger
Location: W101

Technical Lecture Presenter: Pinhe Wang – Technical University of Denmark

Thermal and EMC Management

1:45 PM – 3:25 PM ET

T35 - Battery System Management & Control
Location: W102

Technical Lecture Session Chair: Adam Skorek – University of Québec at Trois-Rivières

Technical Lecture Session Chair: Weiqiang Chen – ABB

1:45 PM – 2:05 PM ET

T35.1 - Hyperparameter Optimization in Bagging-Based Elm Algorithm for Lithium-Ion Battery State of Health Estimation
Location: W102

Technical Lecture Presenter: Xin Sui – Aalborg University

Energy Storage Systems

2:05 PM – 2:25 PM ET

T35.2 - Hybrid Physics and Machine Learning Models of Desktop-Scale Naval Power Systems
Location: W102

Technical Lecture Presenter: Matthew Overlin – PacMar Technologies

Technical Lecture Presenter: Alexander McBain – PacMar Technologies

Microgrid Systems

2:25 PM – 2:45 PM ET

T35.3 - Electro-Thermal Co-Design of a High-Density Power-Stage for a Reconfigurable-Battery-Assisted Electric-Vehicle Fast-Charger Using Multi-Physics Co-Simulation and Topology Optimization
Location: W102

Technical Lecture Presenter: Seyed Amir Assadi, M.A.Sc – University of Toronto

Energy Storage Systems

2:45 PM – 3:05 PM ET

T35.4 - How to Identify Mechanism Consistency for Lfp/C Batteries During Accelerated Calendar and Cycling Aging Using the Lognormal Distribution
Location: W102

Technical Lecture Presenter: Wendi Guo – Aalborg University

Energy Storage Systems

3:05 PM – 3:25 PM ET

T35.5 - Soft-Switching Analysis of Beat Frequency Modulated Microinverters
Location: W102

Technical Lecture Presenter: Dheeraj Etta – Cornell University

Photovoltaic (PV) Inverters and Micro Inverters

1:45 PM – 3:25 PM ET

T36 - Power Components
Location: W109A

Technical Lecture Session Chair: Lincoln Xue – Oak Ridge National Lab

Technical Lecture Session Chair: Mike Ranjram – Arizona State University

1:45 PM – 2:05 PM ET

T36.1 - iFuse — A Controllable Overcurrent Protection Device for Multi-Inverter Microgrids with High IBR Penetration
Location: W109A

Technical Lecture Presenter: Kartavya Agarwal – Georgia Institute of Technology

Interconnects and Fuses

2:05 PM – 2:25 PM ET

T36.2 - B-Tran™ Optimization and Performance Characterization
Location: W109A

Technical Lecture Presenter: Mouzhi Dong – Ideal Power Inc.

Power Silicon MOSFETs, BJTs, IGBTs

2:25 PM – 2:45 PM ET

T36.3 - Supercapacitor Assisted Extra Low Frequency Power Converters and Surge Protectors: Applying Supercapacitor Assisted Loss Management Concept in Practical Applications
Location: W109A

Technical Lecture Presenter: Thilanga Ariyarathna – Waikato Institute of Technology

Capacitors, Supercapacitors

2:45 PM – 3:05 PM ET

T36.4 - Accelerated Degradation Testing and Failure Phenomenon of Metalized Film Capacitors for AC Filtering
Location: W109A

Technical Lecture Presenter: Bo Yao – Aalborg university

Capacitors, Supercapacitors

3:05 PM – 3:25 PM ET

T36.5 - Modeling and Experimental Verification of a Hybrid DC Breaker During Fault Interruption
Location: W109A

Technical Lecture Presenter: Waqas Ali – Friedrich-Alexander-Universität Erlangen-Nürnberg

Interconnects and Fuses

1:45 PM – 3:25 PM ET

T37 - Power Electronics Applications I
Location: W103

Technical Lecture Session Chair: Jeffery Nilles – Alpha&Omega Semiconductor

Technical Lecture Session Chair: Jim Spangler – Independent

1:45 PM – 2:05 PM ET

T37.1 - Adjustable 4-Level Hybrid Converter for Symbol Power Tracking in 5G New Radio
Location: W103

Technical Lecture Presenter: Hieu Pham – University of California San Diego

Network and Telecommunication Power Electronics

2:05 PM – 2:25 PM ET

T37.2 - Design Techniques in Constant On/Off-Time Peak Current Controlled Boost LED Drivers for Fast Start-Up and Dimming Transient Performance
Location: W103

Technical Lecture Presenter: Dipayan Chatterjee – Indian Institute of Technology (IIT) Kharagpur

Lamp Ballasts and LED Lighting

2:25 PM – 2:45 PM ET

T37.3 - Serving Constant and Pulsed Loads in Naval Power and Energy Systems
Location: W103

Technical Lecture Presenter: Jack Hannum – University of South Carolina

Defense and Military Power Electronics

2:45 PM – 3:05 PM ET

T37.4 - xTMS: A Pulse Generator for Exploring Transcranial Magnetic Stimulation Therapies
Location: W103

Technical Lecture Presenter: Kawsar Ali – University of Oxford

AC-DC-AC Applications and Matrix Converters

3:05 PM – 3:25 PM ET

T37.5 - Flexible PCB Connection Methods for Wearable Energy Harvesting Applications
Location: W103

Technical Lecture Presenter: Katherine Kim – National Taiwan University

Energy Harvesting

1:45 PM – 3:25 PM ET

T38 - On Board Charger
Location: W104

Technical Lecture Session Chair: Rasoul Hosseini, PhD – General Motors

Technical Lecture Session Chair: Zhengda Zhang – TESLA

1:45 PM – 2:05 PM ET

T38.1 - Evaluation of Split-Phase Inverter Mode for 1-ph/3-ph Combo Soft-Switching PFC for On-Board Charger Applications
Location: W104

Technical Lecture Presenter: Tomas Sadilek – Delta Electronics

Power Electronics for Hybrid and Electric Cars

2:05 PM – 2:25 PM ET

T38.2 - An Accurate Loss Model of Single-Stage Single-Phase Isolated PFC Converter for Bidirectional Plug-In EV Charger
Location: W104

Technical Lecture Presenter: Nil Patel – Concordia University

Charging Systems

2:25 PM – 2:45 PM ET

T38.3 - Self-Balanced Two-Output Battery Charger
Location: W104

Technical Lecture Presenter: Christian Branas – Universidad de Cantabria

Charging Systems

2:45 PM – 3:05 PM ET

T38.4 - A Two-Stage Twin-Bus Buck Converter for Battery Charging Applications
Location: W104

Technical Lecture Presenter: Nicola Zanatta, PhD – Dept. of Management and Engineering University of Padova Vicenza

Charging Systems

3:05 PM – 3:25 PM ET

T38.5 - Light-Load and Cross-Load Control of Integrated OBC and APM for Electric Vehicle Applications
Location: W104

Technical Lecture Presenter: Misha Kumar, MSEE – Delta Electronics (Americas) Ltd.

Power Electronics for Hybrid and Electric Cars

1:45 PM – 3:25 PM ET

T39 - Three-Phase AC-DC Converters
Location: W105

Technical Lecture Session Chair: John Lam – York University

Technical Lecture Session Chair: Jungwon Choi – University of Minnesota Twin Cities

1:45 PM – 2:05 PM ET

T39.1 - Direct Three-Phase AC-DC Rectifier with High-Frequency Open-Delta Transformer and Closed Loop Output Voltage Regulation
Location: W105

Technical Lecture Presenter: Erick I. Pool-Mazun – Texas A&M University

Single-Phase and Three-Phase Input

2:05 PM – 2:25 PM ET

T39.2 - Investigation of Non-Unity Power Factor Operation of 3-ph ZVS PFC Rectifier for On-Board Charging of Electric Vehicles
Location: W105

Technical Lecture Presenter: Tomas Sadilek – Delta Electronics

Single-Phase and Three-Phase Input

2:25 PM – 2:45 PM ET

T39.3 - Novel Bidirectional Single-Stage Isolated Three-Phase Buck-Boost PFC Rectifier System
Location: W105

Technical Lecture Presenter: David Menzi – ETH Zurich

Bidirectional AC/DC converters

2:45 PM – 3:05 PM ET

T39.4 - Analysis and Mitigation of Sector Transition Distortions for Unfolding-Based Grid-Tied AC-DC Converters
Location: W105

Technical Lecture Presenter: Aditya Zade – Utah State University

Single-Phase and Three-Phase Input

3:05 PM – 3:25 PM ET

T39.5 - Novel DPWM Method with Suppression of the Voltage Unbalance in the Neutral-Point for Vienna Rectifier
Location: W105

Technical Lecture Presenter: Young-Min Go – Dankook University

Single-Phase and Three-Phase Input

1:45 PM – 3:25 PM ET

T40 - 48V-1V DC-DC Converters
Location: W108

Technical Lecture Session Chair: Cahit Gezgin, PhD – Infineon Technologies AG

Technical Lecture Session Chair: Olivier Trescases – University of Toronto

1:45 PM – 2:05 PM ET

T40.1 - Mini-LEGO: A 1.5-MHz 240-A 48-V-to-1-V CPU VRM with 8.4-mm Height for Vertical Power Delivery
Location: W108

Technical Lecture Presenter: Youssef Elasser – Princeton University

Point-of-Load (PoL) and Multi-Phase Converters

2:05 PM – 2:25 PM ET

T40.2 - MSC-PoL: An Ultra-Thin 220-A/48-to-1-V Hybrid GaN-Si CPU VRM with Multistack Switched Capacitor Architecture and Coupled Magnetics
Location: W108

Technical Lecture Presenter: Ping Wang, PhD – Princeton University

Point-of-Load (PoL) and Multi-Phase Converters

2:25 PM – 2:45 PM ET

T40.3 - Multiphase Half-Bridge Current-Doubler Rectifier: A 93.1%-Efficiency Single-Stage 48V Voltage Regulator with 1.04 kW/in³ Power Density
Location: W108

Technical Lecture Presenter: Xin Lou – Virginia Tech

Voltage Regulator Modules (VRM)

2:45 PM – 3:05 PM ET

T40.4 - A Regulated Cascaded Hybrid Switched-Capacitor Converter with Soft-Charging and Zero Voltage Switching for 48-to-12-V Applications
Location: W108

Technical Lecture Presenter: Ting Ge, PhD – University of California - Berkeley

Hard- and Soft-Switched

3:05 PM – 3:25 PM ET

T40.5 - A 500-A/48-to-1-V Switching Bus Converter: A Hybrid Switched-Capacitor Voltage Regulator with 94.7% Peak Efficiency and 464-W/in³ Power Density
Location: W108

Technical Lecture Presenter: Yicheng Zhu – University of California Berkeley

Point-of-Load (PoL) and Multi-Phase Converters

1:45 PM – 3:25 PM ET

IS25 - WBG Devices
Location: W206

Industry Session Chair: Peter Comiskey, BEng(Hons) – Cambridge GaN Devices

Industry Session Chair: Anuj S. Narain, MSEE – Wolfspeed

1:45 PM – 2:10 PM ET

IS25.1 - An Experimental Study on Parasitic Turn-On (PTO) Due to Crosstalk in Fast Switching Silicon Carbide (SiC) Power MOSFETs
Location: W206

Industry Session Presenter: Shashank Mathur – Wolfspeed

WBG Devices

2:10 PM – 2:35 PM ET

IS25.2 - Improving Switching Performance in SiC Power Modules by Better Balancing Gate Threshold Voltage Differences
Location: W206

Industry Session Presenter: Antonia Lanzafame – STMicroelectronics

WBG Devices

2:35 PM – 3:00 PM ET

IS25.3 - On-Chip and Inline Characterization of SiC-MOSFET Physical Parameters for Optimized Gate Drive Control
Location: W206

Industry Session Presenter: Thoralf Rosahl – Robert Bosch GmbH

WBG Devices

3:00 PM – 3:25 PM ET

IS25.4 - A GaN HEMT with Exceptional Gate Overvoltage Robustness
Location: W206

Industry Session Presenter: Bixuan Wang – CPES Virginia Tech

Industry Session Presenter: Daniel Popa

WBG Devices

1:45 PM – 3:25 PM ET

IS26 - Magnetics
Location: W203ABC

Industry Session Chair: George Slama – Würth Elektronik

Industry Session Chair: Ed Herbert – PSMA

1:45 PM – 2:10 PM ET

IS26.1 - Overview for Specifying a Common Mode Choke for Improved Circuit Performance
Location: W203ABC

Industry Session Presenter: Paul Oppelt – Minntronix Inc.

Magnetics

2:10 PM – 2:35 PM ET

IS26.2 - Considerations for Integrating Inductor Within Transformer
Location: W203ABC

Industry Session Presenter: Victor Quinn – Exxelia

Magnetics

2:35 PM – 3:00 PM ET

IS26.3 - Practical LLC Transformer Design Methodology
Location: W203ABC

Industry Session Presenter: Lucas Nicieza, Sr. – Frenetic

Magnetics

3:00 PM – 3:25 PM ET

IS26.4 - Planar Magnetics: A Case Study Showcasing Software Design Tools That Provide Real-Time Relative Performance Analysis
Location: W203ABC

Industry Session Presenter: Vladimir Alexiev – Power Integrations

Magnetics

1:45 PM – 3:25 PM ET

IS27 - Renewable Energy As Primary Power Generation Sources - Topologies and Control
Location: W202BC

Industry Session Chair: Juan Carlos Balda – University of Arkansas

Industry Session Chair: Ke Ma – Shanghai Jiao Tong University

1:45 PM – 2:10 PM ET

IS27.1 - Grid-forming inverters, an enabling technology to realize the power system paradigm shift, from machines to electronics
Location: W202BC

Industry Session Presenter: Gab-Su Seo – National Renewable Energy Laboratory

Renewable Energy As Primary Power Generation Sources - Topologies and Control

2:10 PM – 2:35 PM ET

IS27.2 - Comparison of Goldwind’s Grid Following and Grid Forming Control based WTGs – Designing & Engineering Application Experience
Location: W202BC

Industry Session Presenter: Rui Sun – Goldwind

Renewable Energy As Primary Power Generation Sources - Topologies and Control

2:35 PM – 3:00 PM ET

IS27.3 - High-Voltage SiC Device Technology for Renewable Energy Applications
Location: W202BC

Industry Session Presenter: Victor V. Veliadis – North Carolina State University

Renewable Energy As Primary Power Generation Sources - Topologies and Control

3:00 PM – 3:25 PM ET

IS27.4 - Universal Grid-Forming Control Paradigms and Their Applications to Renewable Generation
Location: W202BC

Industry Session Presenter: Dominic Gross – University of Wisconsin-Madison

Renewable Energy As Primary Power Generation Sources - Topologies and Control

1:45 PM – 3:25 PM ET

IS28 - Open-Source Design Automation Tools for Power Electronics
Location: W204ABC

Industry Session Chair: Alan Mantooth – University of Arkansas

Industry Session Chair: Kevin Hermanns – PE-Systems GmbH

1:45 PM – 2:10 PM ET

IS28.1 - Using OpenSource Technology and Tools in Power Electronics To Drive Innovation, Boost Productivity and Create Value
Location: W204ABC

Industry Session Presenter: Peter Wilson – University of Bath

Open-Source Design Automation Tools for Power Electronics

2:10 PM – 2:35 PM ET

IS28.2 - Open Source Solutions for Power Magnetics Modeling and Design
Location: W204ABC

Industry Session Presenter: Minjie Chen, PhD – Princeton University

Open-Source Design Automation Tools for Power Electronics

2:35 PM – 3:00 PM ET

IS28.3 - Layout Design Automation in Power Electronics
Location: W204ABC

Industry Session Presenter: Alan Mantooth – University of Arkansas

Open-Source Design Automation Tools for Power Electronics

3:00 PM – 3:25 PM ET

IS28.4 - From machine-readable data sheets for power semiconductors to optimized LLC converters utilizing reinforcement learning strategies
Location: W204ABC

Industry Session Presenter: Kevin Hermanns – PE-Systems GmbH

Open-Source Design Automation Tools for Power Electronics

1:45 PM – 3:25 PM ET

IS30 - Effective, Reliable and Stable Operation of 100% Renewable Powered Grid
Location: W205BC

Industry Session Chair: Grain Philip Adam – NEOM Energy and Water

Industry Session Chair: Ricardo Orfei – Siemens Energy

1:45 PM – 2:10 PM ET

IS30.1 - Dynamic Stability in 100% RES system – Technologies and Operation Challenges
Location: W205BC

Industry Session Presenter: Ricardo Orfei – Siemens Energy

Effective, Reliable and Stable Operation of 100% Renewable Powered Grid

2:10 PM – 2:35 PM ET

IS30.2 - Types of System Study and Methodologies for Modular Static Synchronous Series Compensators (mSSSC) in Renewable Grids Installation
Location: W205BC

Industry Session Presenter: Nuwan Perera – Stantec

Effective, Reliable and Stable Operation of 100% Renewable Powered Grid

2:35 PM – 3:00 PM ET

IS30.3 - Planning 100% Renewable Powered Grid: Challenges and Opportunities
Location: W205BC

Industry Session Presenter: Nand Singh – NEOM Energy and Water (ENOWA)

Effective, Reliable and Stable Operation of 100% Renewable Powered Grid

3:00 PM – 3:25 PM ET

IS30.4 - Power Electronic Dominated Grids: Part─I Enhancing synchronous condenser capabilities by interfacing with a back-to-back converter, and Part─II Integration challenges of Large Electrolyzers
Location: W205BC

Industry Session Presenter: Mojtaba Mohaddes – TransGrid Solutions

Effective, Reliable and Stable Operation of 100% Renewable Powered Grid